ShenZhen TZ01 Smart gateway User Guide

Shenzhen TZ01 Smart gateway

FCC Radiation Exposure Statement

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.

FCC Warning
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions

1. This device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

FCC Warning

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions:

1. This device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

NOTE 1: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequeney chetgnd. if not ntlei and in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

NOTE 2: Any changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Product Description

The smart gateway is the control center of the ZigBee device. Users can design and implement intelligent application scenarios by adding a ZigBee devices.

Preparation for use

Mobile phone connection Wi-Fi Make sure both the mobile phone and the smart gateway keep the same Wi-Fi network to ensure the effective connection between the mobile phone and the Smart gateway

Install the “Smart Life” APP

Step A  Find out the “Smart Life”app in Apple app store, Google Play, or scan the QR code bellow and install it.

The free app”Smart Life” is compatible with mobile devices that support IOS8.0 above, Android 4.4 above

Step B Enter the register interface, and input the email address/phone number for getting the verification code to register an account. Please just log in if you already have a Smart Life account.

Access settings

• Connect the gateway to the power supply, and connect to the family 2.4GHz band router through the network cable;
• Confirm that the network indicator (green light) is always on (if the indicator is in other states, long-press the “reset button” until the green light is on)
• Make sure that the mobile phone is connected to the home 2.4GHz band router. At this time, the mobile phone and the gateway are in the same LAN
• Open the “My Home” page of the smart life app and click the add button “+” in the upper right corner of the page
• Click “Gateway and Other” on the left side of the page, and select the gateway (Zigbee) according to the icon;
• Follow the prompts to operate the device to connect to the network, after adding it, you can find the device in the “My Home” list

Product specification

Packing list

• ZigBee smart gateway X 1
• Data cable X 1
• Cable X1
• User Manual X 1
• Screw X3
• Screw plug X3
• Fixed bracket X 1

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>