SUIRUI SR200615 Room KIT Camera User Manual
- June 5, 2024
- SUIRUI
Table of Contents
SUIRUI SR200615 Room KIT Camera
What is in the box
- SuiRui Room Kit *1
- Meeting Control Pad *1
- Power Adapter for Meeting Control Pad*1
- HDMI Cable (2 Meters) *2
- Network Cable (2 Meters) *1
- Power Adapter for the kit *1
- Left Vertical Beam *1
- Right Vertical Beam *1
- Horizontal Beam *2
- Vertical Beam Extension *2
- Gasket *6
- Bolt *6
Exterior illustration
Mount Suirui Room Kit on TV
Note: The brackets are designed to support TV/Monitors between the size of 50 inch ~ 75inch. For those VESA mount has out of range ( 150mm to 600mm ) distance between.
Top mount instruction
-
Remove the two vertical beams from VESA bracket , symmetrically install the two “horizontal beams” (make sure the bolt on beams facing outwards) into the holes on the TV VESA, put vertical beams (used to stabilize TV) and horizontal beams on t op of each other. and then use screws to secure them(a total of 4 bolts).
Note: The two horizontal beams has to be installed symmetrically.
-
Place the two “vertical beam assemblies” on the “horizontal beam” behind the TV back plate in accordance with the convex surface, and double check the “left” and “right” indicators above the brackets. When placing the calibration line above the “vertical beam assembly” make sure the white lines on the “vertical beam assembly” are aligned with the TV edge before they are secured with the screws.
-
Install SuiRui Room Kit, follow the instructions in following Figures
-
Uninstall SuiRui Room kit
When the Kit needs to be removed from the brackets, press the metal latch on the clasp at the top of the “vertical beam assembly” and lift the unit up to remove
Bottom mount instruction
-
Remove the two vertical beams from VESA bracket , symmetrically install the two “horizontal beams” (make sure the bolt on these beams facing outwards) into the holes on the TV VESA, put vertical beams (used to stabilize TV) and horizontal beams on top of each other. and then use screws to secure them (a total of 4 bolts).
Note: The two horizontal beams has to be installed symmetrically.
-
Place the two “vertical beam assemblies” on the “horizontal beam” behind the TV back plate in accordance with the concave surface, and double check the “left” and
“right” indicators above the brackets. When placing the calibration line above the “vertical beam assembly” make sure the white lines on the “vertical beam assembly”are aligned with the TV edge before they are secured with the screws.
-
Install SuiRui Room Kit.
-
Uninstall SuiRui Room Kit
Note: There could be two special scenarios during installation process.- A.Notice that: you will not need horizontal beam if the studs distance equals 600mm.
- B.If the size of the TV exceeds the length of the “vertical beam assembly”, it is neces-sary to install vertical beam extension below the “vertical beam assembly”.
- A.Notice that: you will not need horizontal beam if the studs distance equals 600mm.
Connect Cables
Normally, you will only have to connect four cables to start a dual screen
meeting.
First time start SUIRUI Room Kit
You only need to complete the following setting when you first time start Suirui Kit. You do not need to repeat these steps once the device is set up.
Turn on/off
- Press power button to start。
- Press power button again to shut down。
Connect internet with cable
- Connect to a network with DHCP enabled (See 4. Connect your cables), Suirui Room kit will automatically connect to the network.
Connect to WIFI or wired with Static IP Address
- Turn on control pad, choose setting, and find WIFI list
- Click “Exit” button to exit ZoomRooms application.
- Navigate to Windows “Network & Internet” by clicking Start Menu-> Settings -> Network & Internet; and connect the kit to Internet.
Pairing the control pad and SuiRui Room Kit
- Once connect to Internet, there will be a pairing code on TV.
- Open the Zoom Room App on your control pad, and type in the pairing code to finish pairing.
If your SuiRui Room Kit used cable to connect internet, make sure your control pad connects to same network as your SuiRui Room Kit does.
Setting up your meeting rooms
- Log in your Zoom Room account.
- Set up and choose your meeting room.
- Congratulations! You are now finishing the set ups. You can now start enjoying your meeting!
FCC Notice:
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference.
- This device must accept any interference received, including interference that may cause undesired operation.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and
can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
WARNING: Changes or modifications not expressly approved by the party responsible for compliance could avoid the user’s authority to operate the equipment.
RF Exposure
The equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This device should be installed and operated with
minimum distance 20cm between the radiator & your body.