SHENZHEN N6 Wireless Blt Smart Microphone Instruction Manual

SHENZHEN N6 Wireless Blt Smart Microphone

Thank you for purchasing our product.
Please read the instruction carefully before use.

Preface

Thank you for purchasing our product. Please read the instruction carefully before using the product. Please keep this Manual properly for future reference.
Please read this manual carefully before use to enjoy the optimum performance.
Please follow the safety instruction on the next page.
The pictures in the manual are for reference only, which may be different from the actual product.

Safety Warning

Warning

• • To prevent electric shock, do not expose this product to rain or moisture. Do not remove the cover, the internal voltage may cause damage to your body. In the event of malfunction, please contact the maintenance service agent.
•  Do not keep the product in a humid or dusty place.
• Keep away from high temperatures.
• Do not disassemble the product.
•  Do not expose the product in the dusty air.

Environment-Friendly Use Period
The environment-friendly use period for this electronic information product is 10 years, during which no pollution to the environment or serious damage lo health or property will be caused by the leakage of harmful substances, provided it’s operated in accordance with this manual.

Product features

Structural Representation

Function of the button

1. The function of the button
2. In the power-on state, short press the switching mode (Bluetooth, TF card, U disk, AUX input mode cycle)
3. Lantern button: 1. Short press to turn on/off the lantern
4. Press and hold the button to open/exit the magic sound mode. After entering the magic sound mode, press the button to switch the magic sound effect.
5.  Previous song button: 1. Short press the button to switch to the previous song
6. Long press the button to decrease the accompaniment volume
7.  Play/Pause button: 1. Short press the button to pause/play song/accompaniment.
8.  Long press the button to open/exit the song to eliminate the original singing mode.
9. Long press the button to increase the accompaniment volume
10. Mai volume push button: toggle to adjust the microphone volume
11. Reverb push button: toggle to adjust the microphone reverb size/length

Function description

1. DCSV interface: 1. DCSV charging
2. Wired audio input: The miniUSB end of the recording cable is connected to the K-Mike itself, and the headphone connector is connected at one end. Audio equipment such as mobile phones or MP3s, at this time K song wheat as a small speaker
3. Wired audio recording: The miniUSB end of the recording cable is connected to song Mai itself, and the headphone connector is connected at one end. Mobile phone, K song wheat as a microphone, improve the recording quality of song platform
4. USB interface: support MP3 audio file reading in U disk
5. TF card slot: support TF internal MP3 audio file reading
6. AUX interface: 3.5mm audio output
7. Lantern: multi-color colorful
8. Charging indicator: red in the charging state, the full-charge indicator is off

Common Problems

1. The device cannot be turned on:
   • Check if the equipment has electricity, or please try again after charging
2. The device has noise when using the device
   • Unscrew the net head to see if the microphone is too high and has contact with the net cotton. If there is contact, lower the height of the microphone.
3. The microphone has no sound:
   • Check if the “Mc Volume” button and the “Volume” button are both turned on. 4. The microphone has no reverberation:
4. Unable to search for device name:
5. Check if there is an external device such as a TF card or a USB flash drive. If there is a connection, pull it out or click the mode button.
   • Switch mode, search for device name again
6.  After the mobile phone is connected to the device, the music is stuck:
7. Remove the device and eliminate the interference of current, magnetic field and other factors around the device
8. Playing music is silent or sound is small:
   • Check if the “Volume” push button is on
   • Long press the “Next” button to increase the volume
9. Unable to read TF/U disk:
   • Make sure that the TF/U disk is intact and that there are MP3 files in the TF/U disk.
10. Unable to charge or no wired audio input:
    • Change the charger or USB charging cable to exclude the charging device from being inconsistent
11. The headphone output has noise:
    • AUX supports 3.5mm audio output, ensuring that the headphone plug is three sections instead of four sections

Product specification

PcM’er supply nn:::le: rechargeable

lithium battery

| Channel: Mixed stereo
Batteiy capacity: 1200mAH| Support equipment rrobile phone.

oomputer (INired independent audio)

Charging interface: miniUSB| o..rtput sensitivity: 400mV
Output powec fl,/v| Resciution: >9008
AUX interface: 3.5mm audio output| Signal to noise ratio: DB
TF c.ard sk:Jt support MP3 file reading| Frequency range: 100HZ-10KHZ
Bluetooth version: 5.0|

WARRANTY CARD

Guarantee Card

User name: ID No.:

Tel.:                                                Mobile· Email address:
Product name:      Product trademark:              Product model·

Manufacturing No. (or batch No.)    __

Purchase place:               Province City (County) District

Purchase date: __ (date)

Purchase place: ____

Name of retailer:                            Retailer ID:

Invoice No.: ____

Certificate of quality 

FCC Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a

Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

This device and its antenna(s) must not be co-located or operation in conjunction with any other antenna or transmitter.
The device has been evaluated to meet general RF exposure requirements. in portable exposure conditions without restriction.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>