Western Digital Technologies SDHZB0N 15W SanDisk Ixpand Wireless Charger Instructions

June 5, 2024
Western Digital Technologies

Western Digital Technologies SDHZB0N 15W SanDisk Ixpand Wireless Charger

Scope

WPC 1.2.4 certified wireless charging pad with Qi 15W/iPhone fast charge/Samsung/Qi_5W fast charge.

Product Characteristic

  • Wireless fast charge to Samsung phones .
  • Various LED indicators
  • TYPE-C Jack
  • Compatible with all Qi RX devices.
  • Maximum working environment: 45℃

Input Characteristics

Input Voltage

| Minimum| Normal| Maximum
---|---|---|---
Input Voltage

|

4.75Vdc

|

12.0Vdc

|

13.0Vdc

Charging Mode

|

Qi_5W

|

Qi_10W

|

Qi_15W

| Samsung Fast

Charger

| iPhone Fast Charger
Frequency

|

110~148KHZ

|

127.7KHZ±0.4KHZ

Input Current

  • 1.80Amax. @12.0Vdc Full load
  • 1.75Amax. @9.0Vdc Full load
  • 1.65Amax. @5.0Vdc Full load

Output Characteristics


TX Input Voltage

| Charging Mode(RX)
---|---
Qi-5W| Qi-10W| Qi-15W| iPhone Fast Charger| Samsung

Fast Charger

12.0Vdc| √| √| √| √| √
9.0Vdc| √| √| ∕| √| √
5.0Vdc| √| ∕| ∕| ∕| ∕

Execution Standards (Compatible with these specifications)

EMC Standards

  • EN55032
  • EN55035
  • FCC-Part15

Indicator light

  • Power In :Purple LED for 0.5S
  • 15W Charge : Blue light breathing
  • Fast Charge : Blue light breathing
  • 5W charging: Blue LED
  • Abnormal: Red LED
  • Power adjustment: Blinking Red LED

Attentions

  • Please use the correct rated AC Adapter, to ensure the normal function

Size φ100*13.5mm(±0.5mm)

Weight

72±5g

Warning

FCC WARNING

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  •  Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.
    To maintain compliance with FCC’s RF Exposure guidelines, This equipment should be installed and operated with minimum distance between 20cm the radiator your body: Use only the supplied antenna.

IC Caution:
Radio Standards Specification RSS-Gen, issue 5

  • This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions:
  • This device may not cause interference.
  • This device must accept any interference, including interference that may cause undesired operation of the device.
  • RF exposure statement:
    The equipment complies with IC Radiation exposure limit set forth for uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body

NB WARNING

  • Manufacturer’s Name: U-WAY CORPORATION
  • Sample Description: SanDisk Ixpand Wireless Charger 15W
  • Trade Mark: SanDisk
  • Model number: SDHZB0N, R/N:J3C
  • Operating Temperature: ‐10° C to 40° C

This product is a fixed location. To comply with RF exposure requirements, a minimum separation distance of 20cm must be maintained between the user’s body and the device, including the antenna. Use only the supplied or an approved antenna. This device in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU. All essential radio test suites have been carried out.

  1. CAUTION : RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF
    USED BATTERIES ACCORDING TO THE INSTRUCTIONS

  2. The device complies with RF specifications when the device used at 20cm from your body. This product can be used across EU member states

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals