Q Q WATCHES YPO6322 MULTI FUNCTiON SPORT LCD WATCH User Guide

Q Q WATCHES YPO6322 MULTI FUNCTiON SPORT LCD WATCH

ATTENTION

1. Never try to open the case or remove its back cover.
2. Do not operate buttons underwater.
3. Should moisture appear inside the watch, have it checked immediately by your dealer. Otherwise, it can cause erosion of the metal parts of the watch.
4. Though the watch is designed to withstand normal use, you should avoid rough use or dropping the watch
5. Avoid exposing the watch to temperature extremes.
6. Wipe the watch with a dry, soft cloth only. Avoid allowing it to come into direct contact with chemical materials, which can cause deterioration of the plastic parts of the watch.
7. Avoid wearing the watch in electromagnetic, static conditions.

BUTTONS

Button operations are indicated using the letters shown in the illustration.

• A- Reset
• B- Mode
• C- EL backlight
• D- Start/Stop

DISPLAY

The screen is shown below:

MODE SELECTION

Press “B” to change mode to mode in the following sequence:

• Timekeeping Mode -Stopwatch Mode
• Countdown Mode – Alarm Mode
• Dual Time Mode – Birthday Mode

TIMEKEEPING

• 12/24H Format:
• Hour, Minutes, Seconds,
• Day of week, Month, Date
• 100 years Calendar (2000 2099

STOPWATCH

• 1/100 second unit
• Measuring range:
• 0’000023:59’59”

COUNTDOWN

• Countdown range:
• 23:59’59-o’00″00.

ALARM

• 5 Alarms
• Hourly time signal;
• The alarm sounds at the
• preset time each day.

DUAL TIME

• The time for other
• time zone.

BIRTHDAY

• Eight birthday.

TIMEKEEPING

12/24H Format
In the timekeeping mode, press “D” to switch between 12/24H formats.

Time Setting

1. In the timekeeping mode, press “A” the seconds to flash(flashing indicated in set mode): 99S9) R8
2. Press “D” to reset the seconds 99S9)
3. Press “B” change to the next selection: 2809
4. Press “D” to increase the number, press and hold to change at high speed;
5. Repeat step 3 and 4, the selection in the following sequence: Seconds- Hour Minutes Year- Month Date;
6. Press “A” to exit the set state, after you set (The day of week is auto displayed in accordance with year, month and date cottina)

STOPWATCH

A Lap Time

1. In the stopwatch mode, press “D” to start the stopwatch;
2. To stop the stopwatch by pressing “D” again;
3. Press “A” to reset the stopwatch.

Split Time

1. In the stopwatch mode, press “D” to start the stopwatch;
2. Press “A” to display the split time, stopwatch timing continues internally: SP 103 5922
3. Press “A” to clear the SP 033 split time and to continue time measurement
4. Repeat step 2 and 3, you can measure the multi-split time;
5. Press “D” to stop the stopwatch..

COUNTDoWN

When the countdown reaches zero, the alarm sounds for about 60 seconds and press any button to break it.

Countdown Time Setting

1. In the countdown mode press “A the hour too flash(flashing indicated in set mode):
2. Press “D” to increase the hour, press and hold to increase at high speed; ESS
3. Press “B” change to the next selection; A TR 1028
4. Press “D” to increase the number, press and hold to change at high speed;
5. Repeat step 3 and 4, the selection in the following sequence: Hour Minutes- Seconds;
6. Press “A” to exit the set state, after you set.

Use Countdown Time

1. Press “D” to start the countdown;
2. To pause the countdown by pressing “D” again.

ALARM

The alarm sounds at the preset time each day for about 60 seconds, press any button to break it.

Alarm and chime

• In the alarm mode, press Alarm1- -Alarm5
• In the chime state, press D to on the chime.
• In the Alarm1-Alarm5 state, press D to on/off the alarm.

Alarm1 Setting

1. In the alarm mode, tad in set m node)
2. hor use and blt increase at high speed,
3. press to select the
4. Press “D” to increase the minutes, press and hold to increase at high speed;
5. Press “A” to exit the set state, after you set. Setting and operation of the Alarm1-Alarm5 are the same.

DUAL TIME

Dual Time Setting

1. In the dual time mode, press “A” the hour to flash(flashing indicated in set mode): 328 T210 28
2. Press “D” to increase the hour. press and hold to increase at high speed: 283
3. Press “B” to select the minutes;
4. Press “D” to change the minutes(press once change 30 minutes); e10:28
5. Press “A” to exit the set state, after you set.

BACKLIGHT

The backlight that uses an EL (electro-luminescent) causes the display to glow for easy reading in the dark.

Use EL Backlight

In any mode, press “C” to illuminate the display for about 3 seconds. H 9-2 (999S 3032

BIRTHDAY

The alarm sounded about 60 seconds before the birthday came. press any button to break t.

Birthday

In the birthday mode press “D” to ON (“on”) /OFF (“.-” ) the birthday.

Birthday Setting

1. In the birthday mode, flash/flashing indicated in set mode
2. Press D to increase to change at high speed
3. Press B change to the next selection,
4. Press D to increase the to change at high speed on following s the selection in the Monte-Date- Hour- Minutes
5. Press A” to exit the set state, after you set. Press change to the next birthday, the setting same as the above.
6. Repeat steps 3 and 4, the selection in the following sequence: Month- Date- Hour- Minutes;

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>