PROAIM P-OHCR-01 Clip-on Overhead Rig for DSLR Video Camera Setups User Guide
- June 3, 2024
- PROAIM
Table of Contents
Clip-on Overhead Rig for DSLR Video
Camera Setups (P-OHCR-01)
Assembly Manual
What’s In The Box
Please inspect the contents of your shipped package to ensure you have
received everything that is listed below. 
All rights reserved.
No part of this document may be reproduced, stored in a retrieval system, or
transmitted by any form or by any means, electronic, mechanical, photocopying,
recording, or otherwise, except as may be expressly permitted by the
applicable copyright statutes or in writing by the Publisher.
Clip-on Overhead Rig Setup
- Loosen the track clamp’s knob and mount it by inserting it into the baby pin.
- Insert the track clamp into the baby pin and tighten it properly with the help of a knob.
- Straighten the rails by opening them manually.
- By pressing the pin, join the rails together.
- After joining the rails, it will be properly straightened.
- Loosen both knobs of the track clamp.
- Insert the rail on to the top part of the track clamp.
- Secure by tightening both knobs together.
- Loosen the 4 knobs of the camera mounting plate.
- Loosen the mounting plate.
- Then properly insert the rail in the camera mounting plate, As shown in the image.
- Tighten the 4 knobs of the camera mounting plate properly and insert it into the second track clamp.
- After fixing the rail properly into the clamp, secure them by tightening both knobs together.
- As shown in the image, the Rails are now properly attached with the Track Clamp.
- Attach the camera on the camera mounting plate with the help of the camera bolt and secure it properly.
YOUR PROAIM CLIP-ON OVERHEAD RIG FOR DSLR VIDEO CAMERA SETUPS ALL DRESSED UP
AND READY TO GO! 
Warranty: We offer one year warranty for our products from date of
purchase. Within this period of time, we will repair it without charge for
labor or parts. The warranty doesn’t cover transportation costs nor does it
cover a product subjected to misuse or accidental damage. Warranty repairs are
subjected to inspection and evaluation by us.
Liability: We are not liable for damage caused by products that we do not
supply or from mishandling in transit, accident, misuse, neglect, lack of care
of the product, or service by anyone other than our company.
Contact Us: In case of any kind of dissatisfaction, please Contact us
immediately and we promise our utmost support and care until you use our
product.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>