KARCHER WD 5 Vacuum Cleaner Instruction Manual

June 5, 2024
Karcher

WD 5 Vacuum Cleaner
Instruction Manual

KARCHER WD 5 Vacuum Cleaner - FigureKARCHER WD 5
Vacuum Cleaner - Figure 2KARCHER WD 5 Vacuum Cleaner -
Figure 3KARCHER WD 5 Vacuum Cleaner - Figure
4KARCHER WD 5 Vacuum Cleaner - Figure
5KARCHER WD 5 Vacuum Cleaner - Figure
6KARCHER WD 5 Vacuum Cleaner - Figure
7KARCHER WD 5 Vacuum Cleaner - Figure
8

Dear Customer,
Please read and comply with these original instructions prior to the initial operation of your appliance and store them for later use or subsequent owners.

General notes

Proper use

In accordance with the descriptions and the safety information in these operating instructions, the appliance is intended for use as a multi-purpose vacuum cleaner.
This appliance has been designed for use in private households and is not intended for commercial use.

  • Protect the unit from rain. Do not store outside.
  • This device may not be used to suck in ash and soot. Use the multi-purpose vacuum cleaner only with:
  • Original filter bag.
  • Original spare parts, accessories, and special accessories.
    The manufacturer is not responsible for any damages that may occur on account of improper use or wrong operations.

Environmental protection

The packaging material can be recycled. Please do not place the packaging into the ordinary refuse for disposal, but arrange for the proper recycling.
Old appliances contain valuable materials that can be recycled. Please arrange for the proper recycling of old appliances. Please dispose of your old appliances using appropriate collection systems.

Electrical and electronic devices often contain components that could potentially pose a danger to human health and the environment if handled or disposed of incorrectly.  However, these components are necessary for the proper operation of the device.
Devices marked with this symbol must not be disposed of with regular household rubbish.

Disposing of the filters and filter bags
Filters and filter bags are made from environment-friendly materials.
They can therefore be disposed of through the normal household garbage provided you have not sucked in substances that are not permitted to be thrown into household garbage.
Notes about the ingredients (REACH) You will find current information about the ingredients at: www.kaercher.com/REACH 

Warranty
The warranty terms published by the relevant sales company are applicable in each country. We will repair potential failures of your appliance within the warranty period free of charge, provided that such failure is caused by faulty material or defects in manufacturing. In the event of a warranty claim please contact your dealer or the nearest authorized  Customer Service center.
Please submit the proof of purchase.

Customer Service
Our KÄRCHER branch will be pleased to help you further in the case of questions or faults.

Accessories and Spare Parts
Only use original accessories and spare parts, to ensure the safe and trouble- free operation of the device.
For information about accessories and spare parts, please visit www.kaercher.com.

Safety instructions

DANGER

  • The appliance may only be connected to an alternating current. The voltage must correspond with the type plate on the appliance.

  • Never touch the mains plug and the socket with wet hands.

  • Do not pull the plug from the socket by pulling on the connecting cable.

  • Check the power cord with the mains plug for damage before every use. To avoid risks, arrange immediately the exchange by authorized customer service or a skilled electrician if the power cord is damaged.

  • To avoid accidents due to electrical faults we recommend the use of sockets with a line-side current- limiting circuit breaker (max. 30 mA nominal trip-  ping current).

  • Turn off the appliance and remove the main plug prior to any care and maintenance work.

  • Repair works may only be performed by the authorized customer service.
    WARNING

  • This appliance is not intended for use by persons with limited physical, sensory or mental capacities or lacking experience and/or skills unless such persons are accompanied and supervised by a person in charge of their safety or they have received precise instructions on the use of this appliance and have understood the resulting risks.

  • Children may only use this appliance if they are over the age of 8 and supervised by a person in charge of their safety, or if they have received instructions on the use of this appliance and have understood the resulting risks.

  • Children must not play with this appliance.

  • Supervise children to prevent them from playing with the appliance.

  • Cleaning and user maintenance must not be performed by children without supervision.

  • Keep packaging film away from children – the risk of suffocation!

  • Switch the appliance off after every use and prior to every cleaning/maintenance procedure.

  • Risk of fire. Do not vacuum up any burning or glowing objects.

  • The appliance may not be used in areas where a risk of explosion is present.

  • Immediately switch the appliance off or pull the power plug if foam forms or liquids escape!

  • Do not use abrasives, glass, or universal cleaners! Never immerse the appliance in water.
    Certain materials may produce explosive vapors or mixtures when agitated by the suction air! Never vacuum up the following materials:

  • Explosive or combustible gases, liquids, and dust particles (reactive dust particles)

  • Reactive metal dust particles (such as aluminum, magnesium, and zinc) in combination with highly alkaline or acidic detergents

  • Undiluted, strong acids and alkalies – Organic solvents (such as petrol, paint thinners, acetone, heating oil).
    In addition, these substances may cause the appliance materials to corrode.

Hazard levels

DANGER
Pointer to immediate danger, which leads to severe injuries or death.
WARNING
Pointer to a possibly dangerous situation, which can lead to severe injuries or death.
CAUTION
Pointer to a possibly dangerous situation, which can lead to minor injuries.
ATTENTION
Pointer to a possibly dangerous situation, which can lead to property damage.

Description of the Appliance

Illustrations on fold-out pages!

  • These operating instructions describe the multi-purpose vacuum cleaners listed on the front cover.
  • The illustrations show the maximum equipment;  depending on the model, there are differences in equipment and supplied accessories.
    When unpacking the product, make sure that no accessories are missing and that none of the package contents have been damaged. If you detect any transport damages please contact your dealer.
    • included in the scope of delivery
    ο possible accessories

Suction hose connection

Illustration B1
→ To connect the suction hose during vacuuming.
ON/OFF switch for appliance
(without built-in socket)
Illustration B2
→ position I: Suction or blowing
Position 0: Appliance is switched off

ON/OFF switch for appliance
(with built-in socket)
Illustration B3
→ Position MAX: Vacuuming or blowing.
→ Position MAX: Vacuuming with connected electric tool
→ Performance regulation: Reduce the suction if necessary during vacuuming, blowing or when working with an electric tool.
→ Position 0: The appliance is switched off. The electric tool is supplied with voltage.
Machine socket
Note: Observe the maximum connected load (see Chapter “Technical data”).
Illustration C2
→ To connect an electric tool.
Blowing connection
Illustration E1
→ Connect the suction hose to the blower connection, this will activate the blower function.
Filter cleaning button
Illustration D1
→ For cleaning the flat pleated filter is fitted.
Note: Do not operate the button when the flat pleated filter is wet.
Recessed grip
→ After unlocking it, grab the appliance head by the handle recess and remove it.
Carry handle
Illustration A1
→The carrying handle is also used to lock the appliance head and the container. To unlock, push the bow all the way forward until you clear the lock.
→ Grab the appliance head by the handle recess and remove it.
Filter box and release key
Illustration H1
Illustration H2
→ In order to clean the filter, press the release key, fold out and remove the filter box.
Accessory mount
Illustration G2
→ The accessories compartment allows the storage of suction pipes and suction nozzles on the appliance.
Cable hook
Illustration G2
→ To store the main cable.
Parking position
Illustration F1
→To rest the floor nozzle during work interruptions.
Steering roller
Illustration A2
→Turn the container, press in the steering roller in the openings at the base of the container till the end­point.
Drain screw
Illustration G1
→The drain screw is used to quickly and comfortably empty wastewater in the container. Tilt the contain­er forward for easier emptying.
Filter bag
Illustration A2
Note: Do not use a filter bag for wet vacuuming!
Flat fold filter
(already installed in the appliance)

ATTENTION

Always work with an inserted flat fold filter – during wet as well as dry vacuum cleaning!

Suction hose with a connecting piece
Illustration B1
→Push the suction hose into the connection on the appliance, it snaps in place.
→In order to disconnect it, push down with your thumb and pull the suction hose out.
Note: Accessories, such as suction brushes (optional) can be directly attached to the connecting piece and thus connected to the suction hose.
For convenient working even in tight spaces.
→The removable handle can be attached between the ac­cessories and the suction hose if necessary.
See position 17.
Recommendation: In order to vacuum the floor, attach the handle to the suction hose.
Removable handle
Illustration B1
→Connect the handle with the suction hose until it snaps in place.
Illustration B4
→To remove the handle from the suction hose, press
the notch using your thumb and pull off the handle. Note: Due to removing the handle, accessories can be directly attached to the suction hose.
Recommendation: In order to vacuum the floor, attach the handle to the suction hose.
Suction tubes 2 x 0.5 m
Illustration B1
→Put both suction tubes together and connect them with the handle.
Floor nozzle
(with switching lever)
Illustration B1
For convenient switching between dry and wet dirt:
→ For vacuuming dry dirt off the floor, use the position with extended brush strips.
→For vacuuming water off the floor, use position with extended rubber lips.
Crevice nozzle
→ For edges, joints, heaters, and hard-to-reach locations.
Adapter
Illustration C1
→ To connect the suction hose with an electric tool
→ Adapt the adapter to the connection diameter of the electric tool using a knife if necessary.
Flexible tool hose
Illustration C1
→ For more flexibility when working with electric tools.
Note: Can also be used with an adapter.

Operation

ATTENTION
Always work with an inserted flat fold filter – during wet as well as dry vacuum cleaning!

Before Startup
Illustration A1
→ Remove the appliance head and take the contents out of the container.
→ Turn the container, and press the steering roller in the openings at the base of the container till the endpoint.
→ Insert and lock the appliance head.
→ Clip the holder for the accessory compartment onto the rear side of the appliance.

Startup

Illustration B1
→ Connect accessories.
Illustration B2
→ Plug in the mains plug.
Illustration B3
→ Turn on the machine.

Dry vacuum cleaning

ATTENTION
Work with a dry flat fold filter only.
Check the filter for damage prior to installation and replace as necessary.

Illustration A2
→ For vacuuming dry dirt an additional filter bag can be inserted if necessary.
ATTENTION
Only operate the filter cleaning without a filter bag in-
serted, otherwise the filter bag can get damaged.

Information filter bag

  • The filling level of the filter bag depends on the dirt that is sucked in.
  • The filter bag needs to be replaced more frequently while sucking in fine dust, sand, etc.
  • Clogged filter bags can burst – therefore make sure to replace the filter bag in a timely manner!
    ATTENTION
    Vacuum cold ashes only when using a prefilter.

Wet vacuum cleaning

ATTENTION
Do not use a filter bag!
Note: If the container is full, a float closes the suction opening, and the appliance works at a higher speed. Switch off the appliance immediately, and empty the container.
→ For vacuuming up moisture or wetness pay attention to the correct floor nozzle setting and connect the corresponding accessories.

Working with electrical power tools

→ Adapt the adapter to the connection diameter of the electric tool using a knife if necessary.

Illustration C1
→ A) Plug the enclosed adapter onto the handle of the suction hose and connect the electric tool with the connection.
or
→ B) Use the flexible tool hose to gain more flexibility in your work. Connect this hose to the suction hose and to the adapter and then to the connection of the electric tool.
Illustration C2
→ For appliances with built-in socket: Connect the mains plug of the electric power tool to the vacuum cleaner.
Illustration C3

  • Switch the appliance on (move the rotary switch to the left to position  + **MAX) and start working.
    Note:** As soon as the electric tool is switched on, the suction turbine starts with a 0.5-second delay. If the electric tool is switched off, the suction turbine continues to run for approx. 5 seconds in order to vacuum up the remaining dirt in the suction hose.

The integrated filter cleaning system

The filter cleaning system is intended for vacuuming up large volumes of fine dust without an inserted filter bag.
Note: Thanks to the filter cleaning system the soiled flat pleated filter can be cleaned at the push of the button and the suction performance can be increased again.
Illustration D1
→ Place the handle of the suction hose in the accessory compartment on the appliance head. Push the filter cleaning button 3 x while the appliance is switched on, and wait 4  seconds between the individual operations.
Note: After operating the filter cleaning button several times, check the container for its filling volume. Otherwise, the dirt might escape when the container is opened.

Blowing function

Cleaning hard-to-reach locations or, where vacuuming is not possible, like leaves from a gravel bed.

Illustration E1
→ Connect the suction hose to the blower connection, this will activate the blower function.

Interrupting operation
Illustration B3
→ Turn off the appliance.
Illustration F1
→ Hook the floor nozzle into the parking position.

Finish operation
→ Turn off the appliance and disconnect the main plug.

Empty the container
Illustration G1
→ Remove the appliance head and empty the reservoir filled with wet or dry dirt.
For appliances with drain screws: Empty the dry dirt over the container. Use the drain screw to empty liquids.

Storing the appliance
Illustration G2

→ Stow away the main cable and accessory at the machine. Store the appliance in a dry room.

Care and maintenance

→ Clean the appliance and accessory parts made of plastic with a commercial plastic cleaner.
→ If required, rinse the container and accessories with water properly and dry them before reuse.

Clean flat fold filter

Recommendation: Clean the filter box after every use.
Illustration H1
→ Unlock, fold-out, and remove the filter cartridge, and empty dirt from the filter cartridge over a waste bin.
→ In order to clean the inserted flat fold filter, knock the filter box against the edge of the waste bin. It is not necessary to remove the flat fold filter from the filter box.

If necessary, clean the flat fold filter separately.
Illustration H1
→ Unlock, fold-out, and remove the filter cartridge.
Illustration  H 2
→ Remove the flat fold filter from the filter box and tab it out.
→ When necessary, clean under running water only, do not wipe or brush down. Allow drying completely prior to use.
→ Finally, reinstall the dry flat fold filter into the appliance. Insert the filter cartridge into the appliance.

Troubleshooting

Decreasing cleaning power
If the suction power becomes less, check the following points:
→ If accessories, suction hoses,s or suction pipes are clogged, please remove the obstruction using a stick.

Illustration A2
→ The filter bag is full: Insert a new filter bag.
Illustration H2
→ Flat fold filter contaminated: Remove the filter box and clean the filter (see Chapter “Cleaning the flat fold filter”).
→ Replace damaged flat fold filter.

Technical specifications

The specifications are listed on the flaps. In the following, you will find the explanation of the symbols used.

| Voltage
---|---
| Output P nom
| Max. connection output of appliance socket
| Mains fuse (slow-blow)
| Container capacity
| Water intake with handle
| Water intake with the floor nozzle
| Power cord
| Sound pressure level (EN 60704-2-1)
| Weight (without accessories)

Subject to technical modifications!

THANK YOU!
MERCI! DANKE! GRACIAS!

Registrieren Sie Ihr Produkt und protieren Sie von vielen Vorteilen.
Register your product and benet from many advantages.

www.kaercher.com/welcome

Bewerten Sie Ihr Produkt und sagen Sie uns Ihre Meinung.
Rate your product and tell us your opinion.

www.kaercher.com/dealersearch
Alfred Kärcher SE & Co. KG
Alfred-Kärcher-Str. 28-40
71364 Winnenden (Germany)
Tel.: +49 7195 14-0
Fax: +49 7195 14-2212
http://kaer.ch/er/?l=TwSoJtl9IUOwZyAe1rHDyw

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals