tedee GERDA SLR Modular European Cylinder Installation Guide
- June 5, 2024
- tedee
Table of Contents
tedee GERDA SLR Modular European Cylinder
quick start with GERDA cylinder
GERDA SLR Modular Cylinder can be fitted to any door, equipped with a lock
that works with the euro-profile cylinders.
It’s a part of tedee set. It’s customized for tedee lock to make your door
smart. It also works with traditional keys.
This booklet will give you an overview of the basic features of the GERDA
cylinder and will help you walk through the setup in 3 easy steps.
GERDA cylinder setup
3 easy steps
set of items – what’s in the box?
- A. Cam
- B. Gear
- Keyhole
- Key module
- Clamping screws (x16)
- Spacer [6mm]
- Mounting screw socket
- Cam/Gear module
- Spacer [15mm]
- Shaft module
- Cylinder shaft
- Groove and hole in cylinder shaft
- Spacer spools
- Spacers [6, 10, 10, 15mm]
- Clamping screws (x16)
- Sticker (x3)
- Mounting screw M5x80mm
- Allen key (size 1.5)
- Spacer spools [6mm, 10mm, 10mm, 15mm]
- Keys (x3)
- Code card
necessary to prepare
code card
In case you need additional keys, you should use the key code from the code
card.
You can order extra keys at orders@igerda.com
Helpful tip
Take a photo of your code card and keep it.
setup – 3 easy steps
step 1: PREPARE your door and MEASURE old cylinder
- Please check, how much your cylinder sticks out from the lock escutcheon
- Remove the mounting screw that keeps your old cylinder inside the door lock.
- In order to remove the old cylinder, you may need to insert and turn the key to hide the cam. Try to pull the cylinder gently with the key inside to find the right position when the cam is hidden inside the cylinder.
- Remove the old cylinder from the door lock.
- To properly assemble your new GERDA modular cylinder, you need to measure the old one.
a handful of useful information before you start adjusting the size of your
new GERDA SLR Modular Cylinder
Here is the minimum and maximum size of your GERDA SLR Modular Cylinder after
you remove or add all extra spacers.
Please check the table below for all possible combinations.
GERDA SLR Modular Cylinder
| SIZE A (inside) | SIZE B (outside) |
|---|---|
| 30mm (no spacers) | 37mm (no spacers) |
| 36mm (1 x 6mm) | 43mm (1 x 6mm) |
| 40mm (1 x 10mm) | 47mm (1 x 10mm) |
| 45mm (1 x 15mm) | 52mm (1 x 15mm) |
| 46mm (1 x 6mm + 1 x 10mm) | 53mm (1 x 6mm + 1 x 10mm) |
| 51mm (1 x 6mm + 1 x 15mm) | 58mm (1 x 6mm + 1 x 15mm) |
| 55mm (1 x 10mm + 1 x 15mm) | 62mm (1 x 10mm + 1 x 15mm) |
| 61mm (1 x 6mm + 1 x 10mm + 1 x 15mm) | 68mm (1 x 6mm + 1 x 10mm + 1 x 15mm) |
spools and spacers size in 1:1 scale
If you need to check the spacer or the spool size, you may use the templates
below.
step 2: ADJUST your cylinder
In order to adjust your GERDA SLR Modular Cylinder, add or remove spacers:
If you want to add a spacer, just join one with another. Remember
to insert a matching spool inside the spacer. Match too parts carefully – the
rotation angle needs to be the same.
After you successfully combine the spacers, spools, and modules, you should
fix the cylinder with clamping screws using the Allen key. Rotate the Allen
key clockwise until it stops.
Make sure that your newly assembled GERDA SLR Modular Cylinder matches your old cylinder from the key side. You need to leave some extra length form the lock side (from the inside of your apartment) to make sure that the cylinder sticks out 2 to 6mm from the lock escutcheon.
INSTAL your cylinder
Fix the mounting screw to install the cylinder in the door lock.
final check
- Make sure that the cylinder sticks out from the door escutcheon (from the inside of your apartment) between 2-6mm. If it’s less than 2mm or more than 6mm, go back to Step 2 and adjust its length accordingly.
- If you want to muffle the sound, use the sticker as shown in the picture.
- Insert one of the keys into the keyhole (from the outside of the apartment) and rotate it left and right until it stops. If the bolts work correctly, you’re good to go!
additional and technical information
Models| Type C [cam, 30-61mm / 37-68mm], Type D [gear cam, 30-61mm /
37-68mm]
---|---
Category| Euro profile cylinder
Variants| cam or gear cam
Manufacturer
| ****
GERDA Sp. z o.o. ul. Sokołowska 49, 05-806 Komorów, POLAND
+48 (22) 329 10 30, www.gerda.pl
technical support
For technical support please contact our support team
- atsupport@tedee.com
- at www.tedee.com/support
- (+48) 884 088 011 Mon-Fri 8am – 4pm (CET)
References
- Smart lock | Unlock the keyless life | tedee.com
- Strona główna - Gerda
- Smart lock | Unlock the keyless life | tedee.com
- Get support | tedee.com