NOKIA E3110 Essential True Wireless Earphones User Guide
- June 5, 2024
- Nokia
Table of Contents
NOKIA E3110 Essential True Wireless Earphones User Guide
Contents
Powering on
Pairing mode
Charging
Troubleshooting
Controls
Specifications
- Charging case that holds multiple charges for total playtime. Battery life depends on device settings, environment, usage and many other factors.
Safety guide
Important safety instructions
-
Please read this user guide and warranty manual carefully before using the product for the first time.
-
Do include this user guide if passing the product on to new users.
-
Please inspect the product before use. If there are signs of defects, please stop using the product immediately.
-
Use only the product in environments where wireless Bluetooth® transmission is permitted.
Preventing damage to health and accidents -
Do not listen at high volumes, especially for extended periods, to prevent hearing injury.
-
The permanent magnetic fields created by this product may interfere with medical implants such as cardiac pacemakers and implanted defibrillators (ICDs). Please always maintain a distance of at least 10cm (3.94″) between the products’ magnetic component/s and implanted medical device/s at all times.
-
Keep this product, its accessories and packaging out of reach of young children or pets, as these may pose choking hazards.
-
Do not use the product in an environment that requires your special-attention (e.g. in traffic).
-
Always keep the product dry and avoid exposure to heat sources (including hairdryers, heaters, prolonged strong sunlight etc.) as this may result in product deformation or malfunction. The normal operating temperature of the product is 0 °C-40 °C or 32 °F-104 °F.
-
Please do not use any attachments, accessories, or spare parts with the product unless they are included with the product or recommended by RichGo Technology Co. Ltd.
-
The product should only be cleaned, where necessary, with a soft, dry cloth.
Reset
Intended use/Liability
RichGo will not be responsible for any indirect or consequential loss, loss of
profits or loss of data. Warranty will be void under the following conditions,
and manufacturer reserves the right to refuse to provide service and to demand
charges for any costs of servicing from the customer. There will be no
warranty if the product has been modified or repaired by persons not
authorized by manufacturer; Mishandling or wrong application of product, such
as leaving batteries over an extended period in the product causing battery
fluid leakage, or applying wrong voltage, manual destruction, damage caused by
natural disaster or accident; Product caused by impact sand or liquid damage,
tampering, or operating fail; Install and maintain product without following
instructions provided by the manufacturer; If the model number or item code
attached with the product has been erased or modified; Modify without
authorization the contents of this warranty policy. If the product have been
used for commercial, display, demonstration or rental purpose. All parts
replaced within the warranty period are properties of manufacturer. We have
the right to handle those parts as necessary. Warranty covers only the
hardware of the product’s main body. All other accessories are not covered
within the warranty terms, such as external connection cable, power cable,
computer cables, software, CD, external cover/cabinet and user manual. (For
item description and accessories, please refer to the user manual/instruction
manual/user guide)
Manufacturer Declarations
More information on legal compliance labels can be found at the end of this
document.
Always return your used electronic products, batteries, and packaging
materials to dedicated collection points. This way you help prevent
uncontrolled waste disposal and promote the recycling of materials. Electrical
and electronic products contain a lot of valuable materials, including metals
(such as copper, aluminum, steel, and magnesium) and precious metals (such as
gold, silver, and palladium). All materials of the device can be recovered as
materials and energy. The crossed-out wheelie bin symbol on your product,
battery, literature, or packaging reminds you that all electrical and
electronic products and batteries must be taken to separate collection at the
end of their working life. Do not dispose of these products as unsorted
municipal waste: take them for recycling. For info on your nearest recycling
point, check with your local waste authority.
https://lin.ee/mO2A2LJ
RichGo Technology (Shenzhen) Co.Ltd is a licensee of the Nokia brand for earphones and mobile accessories. Nokia is a registered trademark of Nokia Corporation.
The BLUETOOTH® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by RichGo is under license.
For product support, please visit http://www.nokia.com/shop/support or call 4000230188(CN) 4009993019 (CN)
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>