Shenzhen Gude Electronic Technology P8 Bone Conduction Sports Headphones User Guide
- June 5, 2024
- Shenzhen Gude Electronic Technology
Table of Contents
Shenzhen Gude Electronic Technology P8 Bone Conduction Sports Headphones
Important Safety Tips
Please read this prompt and instruction manua carefully and completely before
use.
Please be sure to include this tip and instruction manual when handing over
the product to a third party.
Feature Overview
- Bone conduction speaker unit
- Magnetic charging interface
- Volume up key/Next song
- Volume down/previous song
- Multi-function key / switch key
- Night running indicator/work indicator
- Wearing memory wire on the head
Charging Instructions
When the voltage of the headset is low, the red light flashes once per second,
and there is an alarm sound. At this time, please connect the power adapter to
charge the headset, otherwise the headset will automatically shut down when
the power of the headset is too low.
After the headset is charged through the magnetic data cable, the work
indicator changes from red (steady on) to blue (steady on). Note: Please use a
DC 5V power adapter that meets national standards and has passed CCC
certification for charging.
Bluetooth pairing
First boot pairing:
In the off state, press and hold the multi-function button for 3 seconds, the blue light is always on for 1 second, the red/blue light flashes alternately, the headset is turned on and directly enters the mobile phone Bluetooth pairing search state. Then turn on your phone or bluetooth device, find “P8” from the bluetooth list, and click connect.
Instructions
-
Tum on the headset In the power-off state, press and hold the multi-function button for 3 seconds until you see the blue light on, accompanied by a “Di Di” sound, and automatically enter the pairing mode. The red/blue
flashes alternately, and the paired device will be automatically connected. -
Turn off the headset In the power-on state, press and hold the multi-function button for 4 seconds until the red light is on, accompanied by a beeping sound.
-
Disconnect and Reconnect: When the headset and the device exceed the Bluetooth connection distance, the headset will be disconnected, and there will be a “Di Di sound. It will automatically reconnect when it returns to the headset and device connection range within 3 minutes. If it exceeds 3 minutes, it will enter the standby state , if it is still not connected after 5 minutes, the headset will automatically shut down.
-
Switch between Bluetooth mode and local storage mode: In the power-on state, double-click the multi-function button, thee Bluetooth mode and the local storage mode are switched alternately, and the prompt sound of “Bluetooth mode” or “Card mode” will be heard.
-
Night running light mode on or of In the power-on state, three-click the multi-function button, the night running light mode will be switched between three modes: always on, flashing, and off.
-
To answer/reject calls: When there is an incoming call, short press the multi-function button to answer, accompanied by a “Di Di” or the phone’s own prompt; long press the multi-function button to reject the call;
-
Hang up the call: During a call, click the multi-function button to hang up:
-
Mute/unmute call switching: During a call, press and hold the volume up button for 3 seconds, the green light will be on and accompanied by a beep sound, indicating that the silent mode is turned on or off;
-
Play/pause music: Short press the multi-function button to play/pause the music;
-
Volume up or next song: Short press the volume up key to increase the volume, long press the volume up key to switch to the next song; the maximum volume is accompanied by a “Di Di Di” prompt;
-
Volume down or previous song: Short press the volume down key to decrease the volume, Iong press the volume down key to switch to the previous song; the minimum volume is accompanied by a “Di Di Di” prompt;
-
How to copy data: In any state, insert the data cable into the PC or mobile phone (with an OTG adapter), read it to the U disk, and copy the required songs or data files to the device;
Precautions
- lt will automatically shut down after 5 minutes without connecting to any mobile phone.
- Please fully charge this product for the first use.
- When charging, please wipe the sweat off the charging interface and keep it dry and not short-circuited.
- Do not immerse the product in liquid for a long time.
- Do not dismantle or repair or modify this product for any reason, otherwise it may cause fire, electronic breakdown or even complete damage to this product.
- lf charging is completed, please disconnect the charger from the device, unplug the charger, and do not charge more than 12 hours continuously.
- Please do not dispose of the old battery in the old household garbage. Improper disposal of the battery may cause the battery to catch fire or explode. Please dispose of this product, battery and other accessories in accordance with local regulations. The battery must not be exposed to excessive heat.
- The battery is forbidden to be disassembled, impacted, squeezed or thrown into fire. If it is severely swollen, please do not continue to use it.
- Do not repair this product by yourself. olf consumers use a power adapter for charging, they should purchase a power adapter that has been certified by CCC and meete the ctendarde
Basic parameters
- Weight: bare metal 32.5g Headphone type: night running bone conduction Bluetooth earphone
- Headphone size: 13510145mm
- Bluetooth version: V5.3
- Transmission distance: 10M
- Frequency response range: 140Hz 15KHz
- Playing time: 6 hours (about 80% volume)
- Charging time: 1.5 hours
- Charging input: DC 5.0V==150mA
- Battery capacity: 180mAh
- Waterproof grade: IPX8
- If the above still does not solve your problem, it is recommended to contact the dealer you purchased in time to provide you with technical support and after-sales service in time, thank you again for your support!
FCC STATEMENT
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) This device must accept any interference received,
including interference that may cause undesired operation. Warning: Changes or
modifications not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates
uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
RF warning statement
The device has been evaluated to meet general RF exposure requirement. The
device can be used in portable exposure condition without restriction
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>