G G D1200CW Desktop Thermal Label Printer Installation Guide

Quick Installation Guide
D1200CW
v1.0

|
---|---
https://itunes.apple.com/WebObjects/MZStore.woa/wa/viewSoftware?id=1572979448| https://play.google.com/store/apps/details?id=com.rongta.app&hl=zh- CN

You can scan the QR Code to download the APP or input ‘Elabel’ in the App Store to download the APP. You can download the driver from the website below: https://label.ggimage.com/

Opening-box List

• Standard Accessories

The pictures are for reference only, please subject to practicality.

Appearance and Components

Preparations before usage

• Startup & Shutdown/usage notices:

1. Adjust printer power supply switch to I status, namely open power supply switch;
2. Adjust printer power supply switch to 0 status, namely close power supply switch;
3. Must use power supply switch to close power supply. The printer’s internal circuit is easily broken if directly unplugged power supply plug to close the power supply, and caused loss of printing data;
4. It needs to wait for a moment (above 5 seconds) when reopening the power supply after power supply closure, failure is easily produced if the immediately open power supply and not set aside a period of time;
5. Please use the original power supply of the machine, otherwise, it may cause printing quality reduction or printer damage.

Cable Connection

Power Connection

1. Confirm that the power switch is in an off (0) state.
2. Connect the power adapter to the printer.
3. Connect the power line to the power adapter.
4. Connect the other end of the power line to a nearby socket.

USB Connection

1. Connect the USB cable to the printer.
2. Connect the USB cable to the PC host.
3. Turn the power switch to the on (I) state.

Bluetooth pairing and printing (only valid for printers with Bluetooth)
The Bluetooth printer needs to be paired with the main device driving the printer before working, and the pairing process is initiated by the main device. When pairing, the printer with a Bluetooth interface must be on. The general pairing method is as follows:

1. Turn on the printer.
2. The main device searches for external Bluetooth devices.
3. If there are multiple external Bluetooth devices, select the printer corresponding to the Bluetooth MAC address (see self-test page for details).
4. Enter the initial password “0000” or “1234”.
5. Complete the pairing.

After successful pairing, other host computers can still be paired with the printer, and each printer can be paired with up to 8 host computers. If more upper computers are paired with printers, the host computer paired with the printer at the earliest will be automatically removed from the pairing list by the printer. At this time, if this host computer needs to drive the printer for printing, it needs to be paired again. (For multi-connected Bluetooth only)
Note: During pairing, please do not turn on multiple printers at the same time, otherwise you may not be able to judge which printer was successfully paired.

Printer usage tips:

• Please use the original power adapter in order to guarantee the printer’s best printing quality;
• Regularly or clean printing headpiece under unclear case could guarantee a high-quality printing effect;
• Suggest carrying out a “label automatic intelligence study” when replacing paper specification (including paper thickness, and quality) each time;
• Avoid using poor quality paper, and poor quality paper only caused extreme damage to printers and printer heating damage;
• The product with automatic paper absorbing functions, please use rear-end absorbing paper way to load paper, and uncover loading paper could cause paper waste;
• If the used paper with poor quality, and the heating piece has been confirmed to confirm, appropriately improve printing density by the driver if it is unable to meet printing effect.

Button function setting
It could carry out a simple operations on the printer by the button.

Folded paper installation

1. Facing the back of the machine, hold the paper guide with both hands, and adjust the distance between the left and right guides according to the folded paper size.
2. Insert the folded paper into the paper guide
3. Confirm that the printer has detected paper feeding, automatically feeds paper, and delivers paper normally

Solution for stuck paper

1. Move the top cover lever forward with both hands and lift the top cover.
2. Remove the jammed paper from the feeding channel, and check whether the print head has adhesive or carbon deposition. If yes, clean it with an alcohol cloth, remove the wrinkled paper and replace it with new paper.

Indicator light status description

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>