vayyar VH02R01 Touchless Fall Detection Instructions
- June 5, 2024
- vayyar
Table of Contents
vayyar VH02R01 Touchless Fall Detection
Safer together
Smart, discreet and fully automatic, Vayyar Home protects 24/7. Simply place
it on the wall and if you fall, it will get you help.
What’s In the Box
IMPORTANT: Watch our video installation guide to learn how to setup your Vayyar Home correctly.
Helpful infomation you will learn in the video:
- How to choose the right location
- How to mount Vayyar Home securely
- How to test your device
Watch it now at:vayyarhome.com/go 
Important tips when mounting Vayyar Home:
- Mount Vayyar Home near an electrical outlet so that it can be plugged in.
- Vayyar Home should have a direct line of sight of all parts of the room. Make sure it is placed away from metallic objects.
When mounting on the wall:
- Vayyar Home should be placed on the wall at a height of
- 5 feet / 1.5 meters from the floor to the center of the device.
- Vayyar Home should be placed on a wall and not on or behind a window, a TV or any piece of furniture.
When mounting on the ceiling:
- Vayyar Home should be mounted in the center of the room.
- The ceiling height be between 8’ 2’’- 9’ 10’’ / 2.5-3.0 m.
Need Assistance with Installation?
Contact us at: [email protected]
Warnings
- Use and handle your Vayyar Home device carefully.
- The Vayyar Home device can break if dropped.
- Using a power adaptor other than the one provided can cause malfunction or potentially damage the Device.
- Opening or tampering with the Device voids the warranty.
- Keep the device away from water. Water damage is not covered by the warranty.
- The device will not function during a power outage.
- The device will not transmit an alert to an emergency contact if the WiFi in your Home is not working.
- You must follow the installation and use instructions or the device will not work.
- Do not mount on wallpaper because the device may fall off the wall or damage the wallpaper.
- Follow the instructions carefully before removing the device from the wall.
FCC Regulations
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this Device may not cause harmful
interference, and (2) this Device must accept any interference received,
including interference that may cause undesired operation. Any changes or
modifications not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital Device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
To maintain compliance with FCC’s RF Exposure guidelines, this equipment
should be installed and operated with a minimum distance of 20cm between the
radiator and your body. Use only the supplied antenna. Changes or
modifications made to this equipment not expressly approved by Vayyar Imaging
Ltd. may void the FCC authorization to operate the equipment. The device
shall not be used on an airplane while airborne.
FCC ID: 2AHIS-VH02R01| Contains FCC ID: 2AHIS-V60G-HOME
For product available in the USA/Canada market, only channel 1~11 can be
operated. Selection of other channels is not possible.
IC Regulations
Industry Canada ICES-003 Compliance : CAN ICES-3 (B)/NMB-3(B)
IC Caution: RSS-Gen Issue 4 December 2014”&”CNR-Gen 4e Décembre 2014:
This device contains licence-exempt transmitter(s)/receiver(s) that comply
with Innovation, Science and Economic Development Canada’s licence-exempt
RSS(s). Operation is subject to the following two conditions:
- This device may not cause interference, and
- This device must accept any interference, including interference that may cause undesired operation of the device.
CE:
Compliance with 2014/53/EU Radio Equipment Directive (RED) In accordance with
Article 10.8(a) and 10.8(b) of the RED, the following table provides
information on the frequency bands used and the maximum RF transmit power of
the product for sale in the EU:
Frequency range (MHz) Max. Transmit Power (dBm/mW)
- 2400-2483.5 Up to 100mW
- 60 GHz Below 100mW
This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. Hereby, Vayyar Imaging Ltd. declares that the radio equipment type Vayyar Home is in compliance with Directive 2014/53/EU