DAKOTA MICRO DM-4DTM RazerCam Camera Adapter Cable User Manual
- June 5, 2024
- DAKOTA MICRO
Table of Contents
DM-4DTM User Manual
DM-4DTM RazerCam Camera Adapter Cable
Installation Guide for AgCam/EnduraCam/RazerCam Camera Adapter Cable with Deutsch DTM06-4S
-
Dakota Micro PN: DM-4DTM
-
The adapter cable is 15 Inches long.
-
This adapter cable is compatible with the Bobcat R Series monitor.
-
This adapter cable allows for the input of one (1) AgCam/EnduraCam/RazerCam CVBS (Analog) camera into the Deutsch DTM06-4S.
-
The DM-4DTM has one (1) video input which allows the use of one (1) camera.
-
The adapter cable looks like this:
A. DTM 4-way Connector (to Monitor)
B. 5-pin Female Switchcraft Connector (to Camera) -
To locate the camera inputs, open the back tailgate of the skid steer and it is at the top of the opening. See your equipment’s user manual for exact location of camera connection ports.
-
This adapter cable can ONLY be used with NTSC AgCam/EnduraCam/RazerCam CVBS (Analog) cameras.
NOTE: Check the equipment’s user manual for the video capabilities (AHD or CVBS) with the display. -
Warranty on this item is 1 year from date of purchase.
CONSUMER LIMITED WARRANTY
Subject to the disclaimer, limitations, and other directions stated hereafter,
Dakota Micro, Inc. warrants that the Product will be free from defects in
material and workmanship for periods as stated hereafter from the date of
original purchase. THIS WARRANTY IS EXPRESSLY MADE IN LIEU OF ANY AND ALL
OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING THE IMPLIED WARRANTIES OF
MERCHANTABILITY OR FITNESS. THE EXCLUSIVE REMEDY OF THE BUYER IS LIMITED TO
REPAIR OR REPLACEMENT OF THE PRODUCT. EXCEPT AS STATED IN THIS WARRANTY,
DAKOTA MICRO SHALL NOT BE LIABLE FOR ANY LOSS, INCONVENIENCE, OR DAMAGE,
INCLUDING DIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES, RESULTING
FROM THE USE OR INABILITY TO USE THE PRODUCT, WHETHER RESULTING FROM BREACH OF
WARRANTY, NEGLIGENCE, STRICT LIABILITY OF ANY OTHER LEGAL THEORY. Any oral
statements or representations made by anyone which are contrary to or at
variance with the terms stated in this LIMITED WARRANTY are void.
Dakota Micro will, at its option, either repair the defect or replace the
defective Product or part thereof with a new or remanufactured equivalent at
no charge to the purchaser for parts or labor for the period of three (3)
years for AgCam® /EnduraCam® and InnoPro® cameras; two (2) years for AgCam®/
EnduraCam® monitors, and Wireless components; Twelve (12) Months for all
Overview Cameras & Monitors, cables and all other accessories.
The Dakota Micro limited warranty periods outlined above apply throughout the
United States and Canada only. A one (1) year maximum limited warranty for all
Products applies to all other geographic locations unless otherwise stated in
writing by Dakota Micro.
This limited warranty does not apply to any issues connected with appearance
that have no relation to the performance of the Product nor to any Product the
exterior of which has been damaged or defaced, which has been subjected to
improper voltage or other misuses, abnormal service or handling, or which has
been altered or modified in design or construction.
In order to enforce the rights under this limited warranty, the purchaser
should follow the steps set forth in the complete Dakota Micro “Warranty &
Repair Policy” available on our website at
www.dakotamicro.com
Neither the sales personnel of Dakota Micro nor any dealer or any other person
is authorized to make any warranties other than those described herein, or to
extend the duration of any warranties beyond the time periods described
herein.
The warranties described herein shall be the sole and exclusive warranties and
remedies provided by Dakota Micro. Correction of defects, in the manner and
for the period of time described herein, shall constitute complete fulfillment
of all liabilities and responsibilities of Dakota Micro to the purchaser with
respect to the Product, and shall constitute full satisfaction of all claims.
In no event shall Dakota Micro be liable or in any way responsible for any
damages or defects in the Product which were caused by repairs or attempted
repairs performed by anyone other than Dakota Micro.
Some states do not allow the limitation or exclusion of incidental or
consequential damages, so said limitation may not apply to you.
Any action at law, suit in equity, or other judicial proceedings for the
enforcement of any right provided for herein or otherwise, or with respect to
any claim that a purchaser may have against Dakota Micro shall be instituted
only in the Courts of the State of North Dakota, either in the state district
court located in Wahpeton, North Dakota or in Federal District Court location
in Fargo, North Dakota. Without regard to conflicts of law principles, the
laws of the state of North Dakota shall govern the interpretation and
enforcement of the terms of this Limited Warranty and all aspects of the
relationship between Dakota Micro and the purchaser.
This warranty gives you specific legal rights and you may also have other
rights, which may vary from state to state.
8659 148½ Ave. SE. Cayuga, ND 58013
Management System Registered to ISO 9001
www.dakotamicro.com
Author: SJE
Rev. By: N/A
Rev Date: 01/03/22
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>