Happy Health HAPPY2110 Happy Ring User Manual

June 5, 2024
Happy Health

Happy Health HAPPY2110 Happy Ring User Manual

Ring Model: HHR2110
Charger Model: HHCH2110

Getting Started

  1. Remove the Happy Ring and Charger from the product packaging
  2. Connect the charger to the supplied USB cable and plug the other end of the cable into a suitable USB-A outlet
  3. Place the Happy Ring on the supplied charger to charge for at least 30 minutes
  4. While the ring is charging, download and install the Happy Ring smartphone app
  5. Once the ring has charged, remove it from the charger and place it on your finger
  6. Open the Happy Ring smartphone app and follow the on screen instructions to complete the setup process

Support

For all set up and product support questions, please contact the Happy Health support team at the following address: support@happy.ai

Safety Information

This product is not a medical device and should not be used to monitor, diagnose, treat, or prevent any medical condition.

If you experience skin irritation following the use of this product, discontinue its use immediately and contact a dermatologist.

This product is not a toy. Keep it away from children.
Do not expose this product to excessive heat. Do not attempt to cut open or puncture this product.

RF Exposure Information:
This device is designed and manufactured not to exceed the exposure limits set forth for an uncontrolled environment.

Regulatory Information

USA
This product contains a lithium-ion battery. Ensure that disposal complies with all local laws and regulations.

FCC ID: 2A3JJ-HAPPY2110

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

This device contains a radio transmitter and receiver. It has been designed to not exceed the RF exposure limits set by the FCC. Do not co-locate or use it in conjunction with other transmitters or antennas.

Canada
Industry Canada ID: IC: 27894-HAPPY2110

IC Notice
This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions:
(1) this device may not cause interference, and
(2) this device must accept any interference, including interference that may cause undesired operation of the device.

CAN ICES-003 (B)/NMB-003(B)
This Class B digital apparatus complies with Canadian ICES-003.

IC Radiation Exposure Statement
This EUT is very low power and compliant with IC CNR-102 exemption requirements.

Product Specifications

  • Outer ring material – High durability ceramic
  • Inner ring materials – Bio-compatible polymers and metals
  • Battery – Lithium polymer rechargeable (<1 W-hr)
  • Charging time – Approximately 2 hours
  • Connectivity – Bluetooth LE
  • Water resistance – Water resistant to 1m
  • Operating temperature – 0 to 55C / 32 to 131F

Read More About This Manual & Download PDF:

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals