Cystereo FUSION Wireless Earbuds User Manual
- June 5, 2024
- Cystereo
Table of Contents
Wireless Earbuds
User Manual
Packing List
Product Overview Charging Case
Charge
Earbuds
charge
Fully charge the Charging Case and earbuds before your first use
Charging Case
Connect the Charging Case to a compatible adapter (not included) with the
Type-C cable, then plug the adapter into a socket.
Earbuds
Align the Charging Pins on the earbuds with those in the case, then place
the earbuds into the case until it magnetically snaps into the Charging Slot.
- Charging: pulse red
- Fully Charged: solid blue for 5 seconds, then be off
- Low Battery: flash red twice for every 5 seconds
Power On Pair
Option 1
Charge Case and take the earbuds out to power on.
Option 2
When the earbuds are not in the case and in power-off status, touch and hold the Touchpad for 1 second to power on.
Pair
Step 1
When the LED Indicators on the earbuds flash red and blue alternately, pair
the earbuds with your mobile device within 60 seconds.
Tip: If the indicators are not flashing alternately, place the earbuds back
into the case and take them out again.
Step 2
Enable Bluetooth on your device, then search and connect to Fusion.
The LED Indicators on the earbuds pulse blue once for every 3 seconds and you will hear “Pairing successful, connected” from the earbuds if the connection is successful.
Wear the Earbuds
If the ear tips don’t fit your ears, you can replace them with the new ones we provided.
Fit the earbuds into your ears.
Functions
Volume
| Volume Up | Tap the Touchpad of the Right(R) Earbud twice |
|---|---|
| Volume Down | Tap the Touchpad of the Left(L) Earbud twice |
Music
| Play/Pause | Tap the Touchpad of either earbud once |
|---|---|
| Previous | EToaurbcuhdafnodr h2osledcothnedTsouchpad of the Left(L) |
| Next | EToaurbcuhdafnodr h2osledcothnedTsouchpad of the Right(R) |
Call
| Accept/End | Tap the Touchpad of either earbud once |
|---|---|
| Decline | fTooru2chseacnodndhsold the Touchpad of either earbud |
Activate Voice Assistant
Tap the Tsiosutacnhtp. ad of either earbud 3 times to wake up voice assiettes.
Power Off
Option 1
Place the earbuds back into the case to automatically power off.
Option 2
Touch and hold the Touchpad for 5 seconds to power off the earbuds.
Option 3
If there is no connection with a Bluetooth device within 3 minutes after
powering on, the earbuds will automatically power off.
Reset
When your mobile phone can’t be paired with the earbuds, place two earbuds
into the Charging Case, then simultaneously touch and hold the Touchpad of two
earbuds for 5 seconds to reset them.
Specification
| Power Supply | 5V **** 1A |
|---|---|
| BT Version | V5.0 |
| Battery Capacity of the Charging Case | 350mAh |
| Charging Time for the Earbud | 30 Minutes |
| Charging Time for the Charging Case | 1-1.5 Hours (s) |
| Playtime | Up to 6 Hours (with 50% volume) |
FCC Caution
Any Changes Of moddicaoonsnot expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device mug accepts any interference received,
including interference that may cause undesired operation.
NOTE: This equipment has been tested and found to comply with the limits
for a Class 8 digital device. pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation.
This equipment generates, uses, and can red Ole radio frequency energy. if not
installed and used in accordance with the instructions. may cause harmful
interference to radio communications, however. there is no guarantee that
interference will not occur in a particular installation.
—Reorient of relocating the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
—Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This transmitter mug is not co. fixated or operating
in conjunction with any other antenna or transmitter.
FCC ID:2AQ3A.FUSION
ISEDC Warning
This device complies with Industry Canada licenceextrript RSS standard (s).
Operation is subject to the following two conditions: (1) this device may not
cause interference. and (2) this device mug accept any interference. including
interference that may cause undesired operation of the device.
CAUTION
RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED
BATTERIES ACCORDING TO THE INSTRUCTIONS The symbol indicates DC voltage
This product bears the selective sorting symbol for waste electrical and
electronic equipment (WEEE). RECYCLING
This means that this product must be handled pursuant to European directive
2012/19/EU in order to be recycled or dismantled to minimize its impact on the
environment.
NOTES:
- High Sound Pressure
- Hearing Damage Risk
- Do not listen at high volume levels for long periods.
Cystereo support
https://qrs.ly/gfbiam1| https://qrs.ly/gfbiam3| 
https://qrs.ly/blbiam2
---|---|---
Manufacturer:
Shenzhen VanTop Technology & Innovation Co., Ltd.
Manufacturer Address: 502,5th Flr. BLDG 4, MinQi Technology Park, No. 65
Lishan Road,
Taoyuan Street, Nanshan District, Shenzhen, China
EC REP
BellaCocool GmbH
Pettenkoferstrage 18,10247,
Berlin, Germany
info@bellacocool.de