LAIWIN LWB0502A Bluetooth Speaker User Manual

LAIWIN LWB0502A Bluetooth Speaker

Package Content

• 1 x Bluetooth Speaker with a base 1 x USB Charging Cable
• 1 x User Manual
• 1 x 3.5mm Audio Cable (Purchase goods)

Structure introduction

1. Speaker
2. Bluetooth speaker with a metal unibody
3. type Mode indicator lights
4. Power, Volume, Play,Stop, LED Power Buttons
5. 4-stage LED charging indicator
6. Button for disconnecting the base and the body
7. Base
8. LED lamp
9. TF Card & Auxiliary Φ3.5mm jack
10. USB Charging port
11. SD Card Saving place
12. USB Charging port

Intro

1. 3 type brightness: low/middle/high, and easy to adjust the angle of the lights when it is set on the base with the Speaker.
2. Support 64GB TF memory card.
3. Support Bluetooth connection to play music.
4. Connect the speaker with your PC, MP3/MP4, player, tablet, Mobile, and other playback devices with a 3.5mm cable jack by a 3.5mm audio cable.

Mode Switch (executes in one single-mode)

Power On – Bluetooth – TF Card – AUX – Power Off

Play – Pause| 1.5s: Bluetooth parallel connection
Volume UP| 1.5s: Next MP3
Volume DOWN| 1.5s: Previous MP3
LED 10% – 50% – 100% – Flash – Off| 1.5s: Voice prompt off/on

Bluetooth Mode

1. Press the Power key to the Bluetooth function.
2. Turn on the phone Bluetooth, search for the name LWB0502A and connect.
3. Play music on your phone.

Mode Switch (executes in one single-mode)

Touch the POWER button to toggle play mode among Bluetooth, TF Card, and Aux- in connection.

1. TF card mode
   Use it for TF card (with music) playback.
   AUX mode
   (additional puchase3.5mm Audio Cable) Auxiliary Φ3.5mm jack: Use it for cabled playback with compatible devices.

Bluetooth pairing executes in one Bluetooth mode

• Step1. Turn off the Bluetooth function of the mobile phone ( in the case where there is no Bluetooth connection ), and press the two Bluetooth speaker power keys to the Bluetooth function. At this time, the two speaker indicators are flashing blue.
• Step2. Press the Play button of any speaker for about 1.5sec, and the speaker will be automatically paired, the pairing is successful, the indicator light will show 1 constant light and 1 flashing state ( when pairing, the distance between 2 speakers should not exceed 1m, if Unsuccessful, please repeat steps 1 and 2 )
• Step3. At this point, turn on the phone Bluetooth, search for the name LWB0502A and connect it. The connection is successful, and the 2 speaker indicators are always on.
• Step4. Play the music on your phone and enjoy the stereo sound from TWS technology.

Specifications

1. SIZE: 103mm78mm42mm(BODY) 95mm76mm48mm(BASE)
2. WEIGHT: 420g
3. 5W Speaker
4. Lithium Battery 2600mAh*2
5. Bluetooth 5.0 technology
6. Support 64GB TF memory card
7. Support 3.5mm audio cable
8. 3 type brightness: low/middle/high
9. input power: DC5V/2A Max

Charging the Bluetooth Speaker

There is 2 way to charge the Bluetooth Speaker.

1. Connect the USB port on the button of the Bluetooth Speaker with a 5V USB cable.
2. Set the Bluetooth Speaker on the base, and connect the USB port on the base with a 5V USB cable.
   5V@1A(normal) 8-12 hours， 5V@2A (fast) 4-6 hours

Warning and Cautions

• Do not try to destruct the device.
• Avoid exposing your device to very cold or very hot temperatures.
• Use this product only for its intended use as described in this manual. Do not use attachments not recommended by Laiwin. Do not expose this product to rain or moisture
• Keep your device and all accessories out of the reach of small children

LWB0502A Equipment name BLUETOOTH SPEAKER                    Type： LWB0502A

(Unit)

| Restricted substances and chemical symbols
 | | |  | |
Lead (Pb)| Mercury (Hg)| Cadmium (Cd)|

()

|

(PBB)

|

(PBDE)

 | ○| ○| ○| ○| ○| ○
 | ○| ○| ○| ○| ○| ○
 | ○| ○| ○| ○| ○| ○
 | ○| ○| ○| ○| ○| ○
USB| ○| ○| ○| ○| ○| ○

FEDERAL COMMUNICATIONS COMMISSION INTERFERENCE STATEMENT

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/ TV technician for help.

CAUTION:
Any changes or modifications not expressly approved by the grantee of this device could void the user’s authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. this device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

RF exposure warning
The equipment complies with FCC RF exposure limits set forth for an uncontrolled environment. The equipment must not be co-located or operating in conjunction with any other antenna or transmitter.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>