LYNXTechnik AG RXT 1001 Power Supply Holder for RFR 1200 User Guide
- October 30, 2023
- LYNXTechnik AG
Table of Contents
LYNXTechnik AG RXT 1001 Power Supply Holder for RFR 1200
Product Information
RXT 1001 Power Supply Holder for RFR 1200
The RXT 1001 is a power supply holder that can be installed on the RFR 1200
yellobrik rack frame. It is designed to simplify cable management by securing
the external power supply and making the installation neat.
Technical Specifications
- Size: 447mm x 103.35mm x 44mm (17.6in x 4.07in x 1.73in)
- Weight: 380g (13.4oz)
- Model #: RXT 1001 (EAN# 4250479327962)
- Includes: 1x power supply holder, 1x mounting bracket, 4 screws
The RXT 1001 can accommodate one RPS A100/RPS 1120 external power supply. Use two RXT 1001 power supply holders to secure the main and redundant external power supplies.
Product Usage Instruction
Installation Instructions
Mounting a module in the bracket
- Unscrew and dismount the existing bracket on an RFR 1200 rack frame. Keep the screws as they will be needed in the next steps.
- Secure the RXT 1001 mounting bracket with a power supply holder onto the RFR 1200 rack frame as shown in the picture.
- Secure the RXT 1001 onto the RFR 1200 using the screws obtained in Step 1.
- Unlock and slide over the power supply support clip.
- Insert the power supply in the power supply holder.
- Lock the power supply support clip by pushing it inwards again. Try to move the module to ensure the fit is secure. No tools are required to insert and remove a power supply module from the bracket.
Please note that the RXT 1001 is designed to work with the RFR 1200 yellobrik rack frame and is not compatible with other rack frames or equipment.
If you have any questions or concerns about installing or using the RXT 1001, please contact our customer support team or visit our website for more information. We are constantly adding more yellobrik modules. Please visit our website for the latest product updates.
LYNXTechnik AG | www.lynx-technik.com Brunnenweg 3, D-64331 Weiterstadt, Germany.
Overview
Power Supply Holder for RFR 1200
Description
RXT 1001, a power supply holder for RFR 1200 yellobrik rack frame, can simplify cable management by securing the external power supply and making the installation neat. RXT 1001 can secure one RPS A100 (RPS 1120) power supply. The RFR 1001 is a mounting bracket for any single yellobrik module. The RXT 1001 consists of two parts: A mounting Bracket and a Power supply holder.
Mounting a module in the bracket
Step 1:
Unscrew and dismount the existing bracket on an RFR 1200 rack frame. Keep the
screws as they would be needed in the next steps.
Step 2:
Secure RXT 1001 mounting bracket with power supply holder as shown in the
picture
Step 3:
Secure RXT 1001 on RFR 1200 using the screws obtained in Step 1.
Step 4:
Unlock and slide over the power supply support clip
Step 5:
Insert the power supply in the power supply holder
Lock the power supply support clip by pushing it inwards again. Try to move the module to ensure the fit is secure. No tools are required to insert and remove a power supply module from the bracket.
RXT 1001 Power supply holder for RFR 1200
This mounting bracket and the holder can be installed on the RFR 1200 and can accommodate one RPS A100/ RPS 1120 external power supply. Use two RXT 1001 power supply holders to secure the main and redundant external power supplies.
Technical Specifications
- Size 447mm x 103.35mm x 44mm (17.6in x 4.07in x 1.73in)
- Weight 380g (13.4oz)
- Model # RXT 1001 ( EAN# 4250479327962 )
- Includes 1x power supply holder, 1x mounting bracket, 4 screws
We are constantly adding more yellobrik modules. Please visit our website for the latest product updates. www.lynx-technik.com. Brunnenweg 3, D-64331 Weiterstadt, Germany.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>