ALLDOCUBE T1011 Smart Tablet User Guide
- June 5, 2024
- ALLDOCUBE
Table of Contents
T1011 Smart Tablet
User Guide
About the Device
Specifications
| CPU | SC9863A |
|---|---|
| RAM | 4GB |
| ROM | 64GB |
| FM | Yes |
| BT | 5.0 |
| GPS | Yes |
| WiFi | 802.11 ac/a/b/g/n 2.4GHz/5GHz |
| TF-card | Up to 128GB microSD |
Display
Touch| 10.1″ 1200*1920
10-points capacitive touch screen
Battery| 6000mAh
MIC| Yes
Speaker| Yes
G-sensor| Yves
OTG| Yes
OS| Android” 10
Camera| Front 2 MP+Rear5MP
SIM-card| Dual-SIM Dual Standby, Micro-SIM (3FF)
Network| GSM+WCDMA+LTE
Battery life| Standby: 480 hours; Local 1080P video playback: 5 hours. Note:
This is laboratory test data. The actual battery life will vary
slightlydepending on the environment and source used by the customer.
Notice: All the pictures in this manual are for reference only, Specifications and design can change without notice. Part of the stated storage is used by the system, so USA be storage is smaller. Android is a trademark of Google LLC,
FCC Caution:
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate this equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference
that may cause undesired operation.
This Product meets the government’s requirements for exposure to radio waves.
The guidelines are based on standards that were developed by independent
scientific organizations through periodic and thorough evaluations of
scientific studies. The standards include a substantial safety margin designed
to assure the safety of all persons regardless of age or health.
FCC RF Exposure Information and Statement the SAR limit of USA (FCC) is1.6
W/kg averaged over one gram of this Device T1011 (FCC ID: 2AK06-T1011) has
been tested against this SAR limit. SAR information on this can be viewed
online at http://www.fcc.gov/oet/ea/fccid/.
Please use the device FCC ID number for the search. This device was tested for
typical operations 0mm from the body. And touch head (touch cheek and Tilt 15
Degree). To maintain compliance with FCC RF exposure requirements, a 10mm
separation distance should be. maintained to the user’s bodies
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses,
and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>