HARMAN BOX310 Bluetooth Speaker User Manual
- June 5, 2024
- Harman
Table of Contents
HARMAN BOX310 Bluetooth Speaker
OPERATING
Select a special sound effect such as horn, clapping, scratch.
Always keep the charging port dry before connecting AC power.
HANDLING
MOUNTING
Always follow instruction and precaution advice from speaker stand manufacturer.
SPECIFICATIONS
-
AC power input: 100 – 240 V ~ 50/60 Hz
-
DC power input: 12 V 4 A
-
Built-in battery: 72 Wh
-
Power consumption: 80 W
-
Standby power consumption: < 2 W with Bluetooth connection; < 0.5W without Bluetooth connection
-
USB output: 5 V 2.1 A (Max.)
-
Speaker drivers: 2 x 6.5 inch (176 mm) woofers + 2 x 2.5 inch (65 mm) tweeters
-
Total output power : 240 W RMS
-
Signal-to-noise (S/N) ratio: > 80 dBA
-
Frequency response: 45 Hz – 20 kHz (-6 dB)
-
Battery charge time: < 3.5 hrs
-
Battery play time: > 18 hrs
-
Bluetooth version: 5.1
-
Bluetooth profile: A2DP1.3, AVRCP V1.6
-
Bluetooth transmitter frequency range: 2.402 – 2480 MHz
-
Bluetooth maximum transmitter power: 15 dBm (EIRP)
-
Bluetooth transmitter modulation: GFSK, π/4 DQPSK, 8DPSK
-
Bluetooth range: Approx. 10 m (33 ft)
-
USB format: FAT 16, FAT 32
-
USB file format: mp3, wma, wav
-
Input sensitivity:
Aux in: 250 mVrms (3.5 mm connector)
Mic in: 20 mVrms; Guitar in: 100 mVrms
Digital Input: Bluetooth/USB -12 dBFS -
Product dimension (W x H x D): 325.6 x 687.7 x 367.8 mm/ 12.8 x 27 x 14.5’’
-
Packaging dimension (W x H x D): 792 x 430 x 388 mm / 31.18 x 16.93 x 15.28’’
-
Net weight: 17.4 kg / 38.4 lbs
-
Gross weight: 19.1 kg / 42.11 lbs
18 hrs battery playtime is only a reference and may vary depending on music content and battery aging after numerous charging and discharging cycles. It’s achievable with a predefined music source, light show switched off, volume level at 13 and Bluetooth streaming source.
BLUETOOTH
The Bluetooth® word mark and logos are registered trademarks owned by
Bluetooth SIG, Inc. and any use of such marks by HARMAN International
Industries, Incorporated is under license. Other trademarks and trade names
are those of their respective owners.
CONNECTIVITY
Made for iPhone 11 Pro Max, iPhone 11 Pro, iPhone 11, iPhone XS Max, iPhone XS, iPhone XR, iPhone X, iPhone 8 Plus, iPhone 8, iPhone 7 Plus, iPhone 7, iPhone SE, iPhone 6s Plus, iPhone 6s, iPhone 6 Plus, and iPhone 6. Use of the Made for Apple badge means that an accessory has been designed to connect specifically to the Apple product(s) identified in the badge and has been certified by the developer to meet Apple performance standards. Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards. Apple, and iPhone are trademarks of Apple Inc., registered in the U.S. and other countries. Apple, and iPhone are trademarks of Apple Inc., registered in the U.S. and other countries. The trademark “iPhone” is used in Japan with a license from Aiphone K.K.
Note: The product is in compliance with the European Union energy legislation.
-
Bluetooth connection mode
The product is intended to be used for streaming music via Bluetooth connection. A consumer can stream Bluetooth audio to the speaker. When the product is connected through Bluetooth, the Bluetooth connection must remain active at all times to ensure proper operation. The product will enter sleep mode (networked standby) after 20 minutes without operation. The power consumption in sleep mode is less than 2.0 Watts, after which it can be re- activated via
Bluetooth connection. -
Bluetooth disconnection mode
The product will enter standby mode after 20 minutes without operation. The power consumption in standby mode is less than 0.5 Watts. The maximum operation temperature is 45 °C No naked flame sources, such as lighted candles, should be placed on the apparatus.
NOTE: This equipment is a Class II or double insulated electrical appliance
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>