Jabra Talk 65 Premium Bluetooth Headset User Manual

Jabra Talk 65 Premium Bluetooth Headset

© 2022 GN Audio A /S. All rights reserved. Jabra® is a trademark of GN Audio A/S. The Bluetooth® word mark and logos are registered trademarks owned by the Bluetooth SIG, Inc. and any use of such marks by GN Audio A/S is under license.
Declaration of Conformity can be found on www.jabra.com/doc

Welcome: Thank you for using the Jabra Talk 65. We hope you will enjoy it!

Jabra Talk 65 features

• 80% noise cancellation with 2 microphones
• All-day calls with up to 14 hours talk time
• Outstanding fit & comfort
• Up to 300 feet/100 meters wireless range
• Protection against dust and water (IP54 rated)
• Media streaming & voice assistant access

Jabra Talk 65 overview

Included accessories

USB cable

EarGels

How to wear

The headset can be worn on the left or right ear.

To wear the headset on the other ear, rotate the microphone horizontally to the other side. Then swivel the microphone up and over and point it towards your mouth.

Selecting an EarGel

It is important to wear the headset with the most comfortable EarGel size for your ears. This will ensure the best audio experience.

How to get the perfect fit

For the best audio quality and comfort, the eargel should fit firmly in your ear, but should not be squeezed into your ear canal.

How to charge

To charge the headset, connect the USB charging cable to the headset’s USB charging port. It is recommended to charge the headset using the supplied charging cable. It takes up to 150 minutes to fully charge the battery.

While charging, the LED indicator shows the charging status. Red indicates the headset is charging. Blue indicates the headset is fully charged.

How to connect

Power on

Press and hold the Multi-function button for 1 second until the LED flashes blue and you hear “Power on”.

Power off

Press and hold the Multi-function button for 3 seconds until the LED flashes red and you hear “Power off”.

Pair to your smartphone

1. Ensure the headset is powered off.
2. Press and hold the Multi-function button for approx. 6 seconds until you hear “Pair mode” and the LED flashes red and blue. The headset is now ready to pair.
3. Go to the Bluetooth menu on your smartphone and select the Talk 65 from the list of available devices.

Connect to your smartphone using NFC

1. Ensure your headset is powered on, and that NFC is enabled on your smartphone.
2. Place the NFC zone of your smartphone against the NFC zone of the headset until your smartphone confirms the connection.

Please note that not all phones support NFC pairing.

How to use 

What the buttons do

• Answer call: Press the Answer/end call button
• End call: Press the Answer/end call button
• Reject call: Double press the Answer/end call button
• Redial last  number: Double press the Answer/end call button when not on a call
• Adjust volume: Press the Volume up or Volume down button, when listening to music or on a call
• Turn LEDs on/off: Press both the Volume up and Volume down buttons simultaneously
• Transfer audio  from headset to  smartphone: While on a call, press and hold (2 sec) the Volume down button to transfer to the call audio to your paired smartphone. Repeat to transfer the call audio back to your headset
• Mute/un-mute microphone: Press the Multi-function button when on a call
• Activate Voice Assistant (i.e. Siri, Google Assistant): Press the Multi-function button when not on a call

Multiple call handling

The headset can accept and handle multiple calls at the same time.

• End current call and answer incoming call: Press the Answer/end call button
• Put current call on hold and answer incoming call: Press and hold (2 second) the Answer/end call button
• Reject incoming call when on a call: Quickly press the Answer/end call button twice

Multipoint mode

• The headset can pair to 8 smartphones or tablets and connect to two at once (Multipoint mode).
• To connect to two smartphones, use the normal pairing process separately for each smartphone (refer to section 5).
• The Jabra Talk 65 will monitor both smartphones and enable you to answer a call on either one using the headset.
• If you are on a call and the other smartphone receives a call, you will hear a notification in the headset.

How to reset

Resetting the headset clears the list of paired devices.

1. Ensure the headset is powered on.
2. Press and hold (10 sec) both the Volume up and Volume down buttons until you hear two beeps.
3. Power off the headset.

You will need to re-pair the headset to your smartphone.

Support

FAQ: View the FAQs on Jabra.com/help/talk65

How to care for your headset

• To prevent the depletion of the battery lifetime or capacity, avoid storing the headset in hot or cold environments, such as a closed truck in summer or in winter conditions.
• When exposed to water, allow the headset sufficient time to dry. It may take up to one hour for the headset to dry thoroughly and power on.
• Do not store the headset for extended periods of time without recharging them (max. three months).

How to clean your headset

1. Apply normal dish soap and water to a cloth, making sure to wring out any excess liquid so the cloth is not dripping wet. Use soap and water only; do not use strong cleaning agents.
2. Gently wipe the headset with the wet cloth, making sure the headset is clean with no layer of suds on the surface.
3. Let the headset rest for at least one minute.
4. Wipe the headset clean with a cloth dampened with water only.
5. Allow the product to dry.

References

• [FAQTitle] | Jabra Talk 65 | FAQ | Jabra Support
• How do I manually reset my Jabra Talk 65 to the default settings? | Jabra Talk 65 | FAQ | Jabra Support
• [FAQTitle] | Jabra Talk 65 | FAQ | Jabra Support
• Best practices for storing rechargeable batteries | Jabra Talk 65 | FAQ | Jabra Support

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>