MEIYATI MYT-JMY01 Pro Spa Cleanser Instructions
- June 5, 2024
- MEIYATI
Table of Contents
MEIYATI MYT-JMY01 Pro Spa Cleanser
What’s In the Box
- Small clean massage head
- Big clean massage head
- Power indicator
- on/off
- Brand logo
- Wireless charging base
Product Introduction:
Meiyati smart Pro Spa cleanser, the product is through the skin structure science, skin cytology, genetics ,pathology, R&D team developed the most safe and effective smart Pro Spa facial cleaning device after 24 months hardworking ,adopts the structure of human body skin texture design, internal and external guide wheel forward and reverse massage roller, removing the skin cuticle and pore melanin effectively, at the same time it can provide essence for underlying skin, to the cells for energy, effectively maintain skin structure integrity, skin firming, young state.
Thank you for choosing Pro Spa Cleanser Introduction
- Wipe your face with a wet face towel, dip the guide of the cleanser with water, and then squeeze the cleanser into the guide( or apply proper amount of cleaner to face evenly)
- Press the button to start(press the key to start, the 3 LED indicator white lights will lights, then press once will pause ,long press 2 seconds will shut down).
- Booting,lead will 1234 start slowly, and then the machine rotates at a constant speed
- The instrument’s each working time is total 3 minutes ,It will pause in 1min and one LED light will be off to remind you to change a part, LED light is all off and shut down after 3 min.
- Do not press the hardly, the instrument will vibrate.
- After using every time, remove the guide wheel and wash it with water directly ,then put it into the instrument base(avoid the instrument slipping and damage).
- LED indicator
- on/off
Instructions for wireless charging
- Connect the USB port of the product line to the 5V charging head, and the male type-C port to the female type-C port of the wireless charging base. Then put the host into the wireless charging base.
- When the base is charging normally, the hidden LED indicator light inside the base shows green, indicating that the charging base is working normally.
- When the cleanser is fully charged, the hidden LED indicator light inside the base shows red indicating that the charging base stops charging.
- If the instrument has no power, and three lights will all become red
- The charging time is about 2-3h,and the wireless charging pairing time is about 5 seconds. When fully charged, the three white lights will on, and during the charging time instrument cannot be used.
- Position of internal indicator light
- Internal indicator light
Guide wheel installation/replacement instructions
The guide can be disassembled and replaced(as shown below).Hold the main body
with one hand and pull the guide in the direction of the arrow with the other
hand to disassemble the guide wheel. When installing, align the guide buckle
with the corresponding position at the end of the body and gently press to
complete the installation.
- Guide wheel (massage head)
- Body of cleansing machine
- Wireless charging base
In order to achieve better cleaning effect, it is recommended to replace the
lead in 3-6 months. Do not soak the instrument in water or wash it with high-
pressure water.
Warranty period:12 months
Shenzhen meiyati intelligent Co.,Ltd.
FCC Statement
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation.
If this equipment does cause harmful interference to radio or television
reception,
which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following
measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
To maintain compliance with FCC’s RF Exposure guidelines, This equipment should be installed and operated with minimum 20cm distance between the radiator and your body: Use only the supplied antenna.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>