Cobra HG S300 Highgear External Noise-Cancelling Speaker
- June 5, 2024
- Cobra
Table of Contents
Cobra HG S300 Highgear External Noise-Cancelling Speaker
Specifications
- Connectivity Technology: Auxiliary
- Speaker Type: Single Speaker
- Brand: Cobra
- Recommended Uses For Product: Construction, Public
- ITEM WEIGHT: 1.8 pounds
- PRODUCT DIMENSIONS: 2.7 x 4.9 x 4.9 inches
Introduction
The High gear external speaker is engineered to deliver Cobra grade performance, unmatched power handling, outstanding sound, durable construction, and attractive style. A beautiful speaker producing superb sound. These are superior heavy-duty noise-cancelling exterior speakers with high-quality noise cancellation and coated speaker cones with strong coatings. With this excellent speaker, you’ll always hear your calls clearly.
These are strong and durable construction with a fully loaded 15 Watt power handling capacity, a 4-inch speaker with a metal mesh grille, a 5.5 oz. magnet, and shock resistance. This speaker is not only constructed to last, but it is also intended to perform well.
These are perfect for CB radios with pa capabilities – ideal for CB radios with pa capabilities to boost volume and preserve sound quality. includes all necessary mounting hardware as well as a ratcheted swivel bracket that allows for a 180-degree angle adjustment.
How to use it.
You can use the HG S300 by following the given steps.
- There is a 3.5mm jack on the speaker.
- Connect the speaker with the receiver.
- Now adjust the frequency scale.
- You will start hearing the sound from the speaker.
- And your FM receiver is connected to the speaker.
FAQ’s
-
Which frequency is used by Cobra radios?
What frequencies are used by FRS and GMRS? Channel 1 is 462.5625 MHz, Channel 2 is 462.5875 MHz, Channel 3 is 462.6125 MHz, Channel 4 is 462.6375 MHz, and Channel 5 is 462.6 for FRS/GMRS. -
How can I tell when the battery in my Cobra walkie-talkie is full?
When completely charged, the battery level indicator on the radio will display all bars. The battery status indicator will continue to flash when connected to the charger. -
How far can a Cobra walkie-talkie be used?
Cobra RX385 Walkie Talkie – Rugged Water Resistant and up to 32 Mile Range Image Result for Cobra Speakers FAQs. -
FRS and GMRS frequencies: what are they?
The UHF band’s 462-467MHz frequency range is where the FRS and GMRS coexist despite being two different radio systems. The 22 simplex channels and frequencies are shared by both services. -
Cobra microTALK: What is it?
With a maximum range of up to 16 miles, the Cobra microTALK CXT85 supports all 22 FRS/GMRS channels (typically less than a mile in urban conditions). A call alert tone, a power saver, and a battery low indication are features of the entry-level CXT85 radio. -
How long does it take a Cobra walkie-talkie to charge?
Batteries typically require 15 hours to completely recharge. Batteries should not be recharged for more than 24 hours. On a full charge, the estimated operating duration is 8 hours. To recharge your Cobra microTALK® radio, only use the included rechargeable batteries and wall charger. -
How can the volume be increased on a Cobra walkie-talkie?
By tapping the VOLUME UP or VOLUME DOWN keys, you may change the volume. The range of your microTALK® radio is up to 3 kilometres (2 miles). Depending on the environment and terrain, your range will change. Your radio will function at its greatest range in flat, open terrain. -
My Cobra walkie-talkie needs to be reset.
The steps to reset your handheld radio to factory settings are provided below if it is not functioning correctly. Hold the MODE and WX/UIC buttons simultaneously before turning the device on. Hold the buttons down while the display is tested. Hold down both the DW and MEM/ESC buttons before turning the power on. -
On my Cobra, how can I change the channel?
A: After turning on your radio, press and hold the Mode/Power button to change the station. To choose a channel, press the Channel Up or Channel Down button. To communicate, both radios must be set to the same channel and privacy code. -
On a Cobra walkie-talkie, how do you communicate?
Press the chat button to interact with someone else. Speak in a natural tone of voice while holding the radio’s mouthpiece about two inches from your mouth. You must depress the button after speaking in order to receive communications.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>