Homeatstay MC10V1 Smart Camera User Manual
- June 5, 2024
- Homeatstay
Table of Contents
User’s manual
Registration & Login
-
Register an account to use the Nugroho.me APP.
a. Use your email address during registration.
b. Tap “Get” to receive a verification code & enter it. -
If you forgot your password, tap ‘forgot password’ on the login screen. A verification code will be sent to your email to change your password.
Main Page & Devices
- If this icon is showing on the camera view, it means your phone and camera are connected to different servers.
a. Tap Settings > Logout.
b. Re-login to connect to the proper server.
Add a Camera
-
Smart mode (Wireless)
a. Turn the camera on.
b. Wait for 30s for the camera to start.
c. Reset the camera with the reset tool
i. press the reset button & hold for 2 seconds
ii. If you hear ‘du~’, press the reset button again
iii. When you hear di-di~’ & the indicator light is flashing red slowly (every 2 seconds)
iv. you’re in Smart mode -
AP Mode
a. Turn the camera on.
b. Wait for 30s for the camera to start
c. Reset the camera with the reset tool
i. Press & hold the reset button for 2 seconds.
ii. If you hear ‘di-di’, press & hold again.
iii. When you hear ‘du~’ &
iv. the indicator light is flashing red quickly (2x / second)
v. you’re in AP mode.
3. Wired mode
a. Plug network cable into the camera’s network port.
b. Press & hold the reset button for 2 seconds.
c. When you hear di-di~’ &
d. the indicator light is flashing red slowly (every 2 seconds)
e. you’re in Wired mode
Figure 3
3.1. Wireless mode
Connect the camera to Wi-Fi.
2.4G/5G WiFi Support Instructions
-
Please turn up the volume of your mobile phone and approach the camera, then tap
“Next” to move on. It will take a few seconds after you have entered the password for the Wi-Fi connection. -
When the camera makes a “Ding-dong” sound, please tap “Next” and wait for the connection to the network;
-
When you hear “Camera Ready”, please wait until the APP displays the page for you to name your camera. Then you can name the camera or skip to the next step to view the camera video.
3.2. Wire mode
Only available for the model with Ethernet interface
- Use an Ethernet cable to connect the camera to the router according to APP instructions, then tap “next”;
- APP will start to search for cameras automatically until all available cameras are shown on the list in the order of their Mac addresses. Choose one of the cameras to add to your account and wait for the status light to turn green along with a “Ding- dong” Sound.
- When you hear “Camera Ready”, please wait until the APP displays the page for you to input the name of the camera. Then name the camera or skip to the next step to view the camera video.
- Video play
When the camera is online, you can tap on the name of the camera on the page
of “My Camera” to enter the video play page.
4.1. Live video
Multiple kinds of gestures could be used to adjust the video image, such as
touch, tap, swipe and pinch. 
Icon shows up when playing panoramic camera video. Tap on it to switch between
different modes of image display.
4.2. Video recording
If a Micro SD card is installed in the camera or the cloud storage service is
subscribed (Please refer to term 7 to have detailed knowledge of cloud
storage), video recordings will be stored in the card or cloud in a loop way.
Drag your finger on the timeline to replay the recordings that are saved on
the Micro SD card or cloud. Blue color indicates that the recordings are saved
on the Micro SD card while the green color indicates the recordings are saved
on the cloud.
Please unplug the camera before inserting /removing the Micro SD card. If the
blue color does not show up on the time period section, please check if the
card is still in normal status.
4.3. Save recording onto a mobile phone
When you are playing live or recorded video, it is easy to save an MP4 video
file or JPEG image file on your mobile phone by tapping the icon. You can find
the files on the album page and simply share them on social media.
5. Alert function——message page
5.1. Enable/Disable alert function
On “My Camera” page, tap on the icon to turn off/on the alert function. When
the camera detects a moving object, it generates an alert message, and the
cloud server then sends it to your APP. The message shows up at the bottom of
APP and the alert video will be recorded on a memory card or cloud (cloud
storage could be subscribed).
5.2. Message check & download
Tap on to enter a message page (Figure 6).
Warning: a. You can only download alert videos when you have a Micro SD
card in the camera or your cloud storage function is subscribed.
b.Micro SD card should be ONLY inserted/removed when the camera is unplugged.
Incorrect operation may cause the failure of downloading.
c.Please return and try again if the network connection causes failure of
downloading.
Once the alert image is downloaded, tap on it to replay the alert video
accordingly.
5.3. Alert setting
Tap on the icon on the top left corner of the message page to enter the
setting page, on which you can turn on/off alert function, set alert time,
sensitivity and your preferred parameter. Tap on “Reset” to set alert time and
sensitivity. (Figure 8).
Select your preferred alert time and sensitivity then tap “OK”.
6.APP setting——”setting” page
7. Camera shooting angle & Mounting type
In terms of visual field, cameras can be classified as panoramic type and
common type, each one of which has its suitable shooting angle and mounting
method.
7.1. Panoramic camera
Three options of shooting angles are available for the panoramic camera
(Figure 16)
（1）Horizontal： Mount on the wall or table with lens facing horizontal level;
（2）Overlook： Mount on the ceiling with the lens facing down;
（3）Look up： Mount on the table with your lens facing up.
In the status of overlook/look up, tap on the icon to get various viewing
modes.
7.2. Common camera
Two options of shooting angels are available for a common camera (Figure 17)：
（1）Horizontal—normal:mount on the table (Figure 18);
（2）Horizontal—reverse: mount on the ceiling (Figure 19).
8. Panoramic navigation
Panoramic navigation is a kind of unique operation mode for Pan & Tilt Camera,
with which you can simply rotate the camera exactly to the direction you want
just by a “tap”.
8.1. Creating panoramic navigation picture
When a Pan & Tilt camera is added, you can tap on the icon to to create a
panoramic navigation picture (Figure 1).
8.2. Panoramic navigation operation
After a panoramic navigation picture is created (Figure 20), tap anywhere on
the picture and the camera will rotate immediately and point to that location.
8.3. Set shooting angle via panoramic navigation picture
You can set maximum 3 sets of shooting angels via a panoramic navigation
picture. Once set, the camera will turn to the location at a preset time.
Setup steps:
- Tap on a target point of a panoramic navigation picture to rotate the camera to the location.
- Tap on the icon, then a new setting interface will pop up as shown in figure 22.
- Set preset time then repeat step 1 and 2 for each shooting angle. Each icon ****means a single preset of a single shooting angle (Figure 23).
FCC Warning
This device complies with part 15 of the FCC rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
a minimum distance 20cm between the radiator and your body.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>