tp-link TL-POE160S PoE Injector Installation Guide

: June 5, 2024
: tp-link

Table of Contents

tp-link TL-POE160S PoE Injector
Connection
Specifications
Environmental and Physical Specifications
Safety Information
FAQ
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

tp-link TL-POE160S PoE Injector

tp-link TL-POE160S PoE Injector
PRODUCT LED Explanation

PWR

On: Power on
Off: Power off

PoE (Only for TL-POE170S)

On: Normal power supply
OFF: No powered device connected
Flashing: Abnormal power supply

Note: For simplicity, we will take TL-POE160S for example in this Guide.

Connection

tp-link TL-POE160S PoE Injector FIG 1

Note:

The PoE Injector supplies steady power and data connectivity to a powered device such as PoE IP Camera, PoE AP and PoE IP Phone through an Ethernet cable.
For TL-POE170S, plug the product into the wall outlets with earthing connection through the power supply cord.

Specifications

General Specifications

Standards
- IEEE 802.3i, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3af.
- IEEE 802.3at
- EEE 802.3bt (Only for TL-POE170S)
LED
- TL-POE160S: PWR
- TL-POE170S: PWR, PoE
Cable Type
- UTP/STP of Cat. 5 or above (based on the standards that the connected devices comply with)
Ports
- 10/100/1000 Mbps RJ45 DATA IN Port
- 10/100/1000 Mbps RJ45 PWR+DATA OUT Port AC
- 100–240 V 50/60 Hz Power Input Port
Maximum Power Supply
- TL-POE160S: 30 W
- TL-POE170S: 60 W
Dimensions (L×W×H)
- TL-POE160S: 125×59.4×36.8 mm
- TL-POE170S: 154.7x70x42 mm
Wall Mountable
- Yes
Distance Between Mounting Holes
- TL-POE170S: 102 mm

Environmental and Physical Specifications

Operating Temperature
- TL-POE160S: 0 C to 40 C (32 F to 104 F)
- TL-POE160S: 0 C to 40 C (32 F to 104 F)
Storage Temperature
- -40 C to 70 C(-40 F to 158 F)
Operating Humidity
- 10% to 90% RH non-condensing
Storage Humidity
- 5% to 90% RH non-condensing

Safety Information

Keep the device away from water, fire, humidity or hot environments.
Do not attempt to disassemble, repair, or modify the device. If you need service, please contact us.
The plug on the power supply cord is used as the disconnect device, the socket outlet shall be easily accessible.

Please read and follow the above safety information when operating the device. We cannot guarantee that no accidents or damage will occur due to improper use of the device. Please use this product with care and operate at your own risk.

FAQ

Q1. Can the PoE injector supply power to a PoE device that doesn’t have a gigabit PoE port?
A: Yes. All RJ45 ports of the PoE injector support 10/100/1000 Mbps.

Q2. What can I do if my PoE injector doesn’t supply power to the powered device or the supplied power is unstable?
A1: Ensure the PD is PoE-compliant and its connecting port supports the PoE
function.
A2: Ensure the power consumption of the PD doesn’t exceed the maximum power supply of the PoE injector, otherwise the overload protection of the PoE injector will be activated. The quality and length of the Ethernet cable may influence the reception of the power supply.

To ask questions, find answers, and communicate with TP-Link users or engineers, please visit https://community.tp-link.com to join TP-Link Community.
For technical support and other information, please visit
https://www.tp-link.com/support, or simply scan the QR code.
If you have any suggestions or needs on the product guides, welcome to email techwriter@tp-link.com.cn.

TP-Link hereby declares that the device is in compliance with the essential requirements and other relevant provisions of directives 2014/30/EU,
The original EU declaration of conformity may be found at
https://www.tp-link.com/en/support/ce.

TP-Link hereby declares that the device is in compliance with the essential requirements and other relevant provisions of the Electromagnetic Compatibility Regulations 2016 and Electrical Equipment (Safety) Regulations 2016.
The original UK Declaration of Conformity may be found at
https://www.tp-link.com/support/ukca