cootway BT601 Waterproof Wireless Speaker User Manual
- June 5, 2024
- cootway
Table of Contents
cootway BT601 Waterproof Wireless Speaker
B T601 is a waterproof Bluetooth speaker with LED light. You can enjoy the
product outdoor or indoor, in your swimming pool, on the beach, in a jaccuzi,
at home …
This product is waterproof and designed to enlight your swimming pool with a
IPX7 grade. You can share your music via iPhone, iPad, iPod, a smartphone, a
tablet, or any other device with Bluetooth function. BT601 is equiped to the
call function. The RGB LED light, according to the light mode chosen can adapt
the twinkle rythm to the music beat.
OVERVIEW
SPECIFICATIONS
- Battery capacity: 1600 mAh /3.7V Li-battery (battery life : 6-8 hours)
- Bluetooth distance: within 15 meters
- Frequency: 2402MHz-2480MHz
- Ratio of Signal and noise: >82dB
- Equipped with SW HIFI speaker.
- Dimension : 120x88mm
- INCLUDED: BT601 , Manual, Charging cable
BUTTON FUNCTION
Multifunction Button
- Long press 3 seconds to power on, and long press again 3 seconds to power off. Immediately enter into 8 seconds connecting back state after power on , and enter pairing state iffail to connect back. It shall enter into the sleep state after 20 minutes. If over 60 minutes, it automatically shut down.
- Connect with the device after pairing. Short press the multifunctional button when playing music, the music play/pause.
- When the call coming, short press the multifunction button to answer the phone, and double press the multifunction button to refuse the call.
volume – and previous” Button :
Short press the button to play the previous track, long press the button to
reduce the volume.
volume + and next” Button :
Short press the button to play the next track, long press the button to
increase the volume.
Light mode Button :
Short press to select different flashing mode and turn on/turn off mode:
Slow changing colours, Red, Green, or Blue light, different mode in one mode,
slow flashing mode, fast flashing mode, OFF. (Slow flashing defaults mode
without music, led flash following the music melody when music playing).
BLUETOOTH PAIRING SETTINGS:
Long press on the multifunction button for 3 seconds to power on. Wait the
blue light flash, open the bluetooth mode on your smartphone and select” BT601
“to pair the device.
It’s now paired. You can broadcast your music ! If not, start again or
relaunch the BT601 .
CHARGING
Take the USB included . Connect the USB port to a SV USB outlet and the DC jack to the BT601 . During the charging, the LED indicator will flash slowly in red. When the battery is full the LED indicator is green.
Note : Use the included cable and respect the voltage !
FCC Warning
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
NOTE 1: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.