Shenzhen W01 3-in-1 Wireless Charger User Manual

Shenzhen W01 3-in-1 Wireless Charger

SAFETY AND WARRANTY

Important Safety Instructions

• Using an ultra-thick protective phone case or a case with magnetic/iron plate is not recommended, as it may affect the wireless charging function.
• Avoid dropping.
• Do not disassemble.
• Do not expose to liquids.
• For the safest and fastest charge, use original or certified cables.
• The product is suitable for moderate climates only.
• The maximum ambient temperature during use of the product must not exceed 60°C.
• Naked flame sources, such as candles, must not be placed on the product.
  If you want to clean the product, use only with dry clothes or a brush.

Warranty

• We strive to build our products with the highest attention to detail and craftsmanship. However, sometimes there are occurrences of defect.
• We are happy to offer a one-year hassle-free warranty to all our products as we continue to make amazing products. Please contact us if you have any questions about our devices.

Package Contents

At a Glance

Using the Wireless Charger

1. Plug the USB connector of the USB-C charging cable (included) into a Quick Charge 2.0/3.0/Power Delivery wall charger (not included) and connect the charger to a power source. Connect the other end of the USB-C charging cable to the wireless charger. The indicator turns red.

2. Charging a phone or TWS earbuds: Place a supported mobile device in the charging area of the charging surface
   Charging Apple watch:

3. Open the cover of the watch charging cable compartment under the charger.

4. Mount the pad of your original Apple watch magnetic charging cable (not included) on the hole of the stand through the cable compartment and push the pad into the hole completely until it sits in the hole firmly.

5. Plug the USB connector of the magnetic charging cable into the USB-A input port in the compartment.

6. Wrap the cable neatly in the compartment and close the cover.

7. Place your Apple watch on the watch charging stand.

8. The indicator stays blue. You can check the charging indicator on each mobile device for the charging status.

9. When the mobile device is fully charged, remove it from the wireless charger.

Notes :

• For some Qi-compatible devices, you may need to buy a Qi-compatible receiver (not included) separately to activate the wireless charging function.
• Do not place foreign materials, such as metal objects, magnets, and magnetic stripe cards, between the mobile device and the wireless charger. The mobile device may not charge properly or may be damaged due to overheating.
• The wireless charger supports charging through phone cases up to 6 mm thick. For the optimal performance, remove your protective phone case and other metal or magnetic objects, and place your phone properly in the wireless charging area.
• If you connect a charger to the mobile device during wireless charging,  the wireless charging feature will be unavailable.
• The wireless charger supports fast wireless charging. To begin fast wireless charging, place a mobile device that supports fast wireless charging on the wireless charger. Quick charge 2.0/3.0/Power Delivery wall charger (not included) is required for fast wireless charging. 5V/1A wall chargers or computers’ USB ports are not sufficient to power the wireless charger
• To charge an Apple Watch, an official Apple Watch charging cable (not included) is required.

**LED Indicator Guide

**

Specification

FCC ID: 2AR5E-W01

NOTE : This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet ona circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.

FCC Radiation Exposure Statement

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 cm between the radiator and your body

Business name: AMZLAB GmbH
Business address : Laubenhof 23.45326 Fssen

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>