SUNCHIP AD-08A Face Recognition Temperature Measurement Terminal User Manual
- June 5, 2024
- SUNCHIP
Table of Contents
SUNCHIP AD-08A Face Recognition Temperature Measurement Terminal
Composition description
Frame description
Interface description
Product size ( mm)-Column style
Product size ( mm)-Wall hanging style
Power on settings
Power on settings network and device activation
Set server, company, community name, installation location and access
mode
Face registration
Face input of local device (click the face mark in the lower right
corner with the cursor)
Select the gate settings – click “open face management”
Face registration
Select single person registration & batch import face for registration
Batch registration: in batch registration mode. first use the U disk to name the employee’s picture (such as “Zhang San. JPG”) under a folder. Then click the batch import function on the face recognition machine. Select the picture folder under the U disk to import.
System settings
Mask mode(When the mask mode is on, the device recognizes the user
without the mask. and prompts to wear the mask. The device flashes red status light to indicate early warningl)
Stranger mode(Turn on stranger mode. the device will flash red status
light for unregistered face users to show early warningl Don’t open the door!)
CE NB
Herby, Shenzhen Sunchip Technology Co., Ltd. declares that this Face
recognition temperature
measurement terminal，AD-08A is in compliance with the essential requirements
and other
relevant provisions of Directive 2014/53/EU. In accordance with Article 10(2)
and Article 10(10),
this product allowed to be used in all EU member states.
Use the Face recognition temperature measurement terminal in the environment
with the
temperature between -20℃ and 35℃,
Adapter shall be installed near the equipment and shall be easily accessible.
The plug considered as disconnect device of adapter
- Adapter Model: TDX-1202000
- Input: AC 100-240V, 50/60Hz, 0.6A Output: DC 12V, 2.0A
- Operation Frequency: For WIFI: 2412MHz~2472MHz (802.11b/802.11g/802.11n(HT20)) For BT: 2402MHz~2480MHz
- Max output power: For WIFI: 0.0555W For BT: 0.003W
- Manufacturer： Shenzhen Sunchip Technology Co., Ltd.
- Address：2nd-3rd Floor, Building 4, Fuan Industry, Area Phase 2, Dayang Development Zone,
- Fuyong, Baoan, Shenzhen, China
- Tel: 0755-23085934
- Fax: 0755-23086272
- E-mail: Wangsw@sunchip-tech.com
FCC Statement
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
This equipment should be installed and operated with a minimum distance of 20 centimeters between the radiator and your body.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>