Sound Good Ultimate V6 Wireless Earbuds User Manual
- June 5, 2024
- Sound Good
Table of Contents
Sound Good Ultimate V6 Wireless Earbuds
Contents
Here are the contents of your Sounde Good product. To maintain the warranty, please keep all tems from the list below,
- Box
- User manual
- Earbuds case
- 2 earbuds
- Extra silicone ear tips
Pairing instructions
Apple 10S/ Android
- Go to the Bluetooth settings on your device,
- Open the case, puts the earbuds in your ears.
- Select ultimate V6 on the menu to pair,
PRODUCT DIAGRAM
Face A
- A1-LED Indicator
- A2-Touch functions area
Face B
- B1-Charging contacts
- B2-Silcone ear tip
Touch functions (1/2)
Cals/Appels
During anincoming call. cick once on any earbud to answet During an imooming
cal, press 2 tmes on any earbud to reject, When in a call, double-click on any
earbud to hang up the call.
Voice assistant/ Assistant vacal
Triple-click right earbud to tum on voice assistant.
Touch functions (2/2)
Music/Musique
- When playing music, click once on any earbud to play/pause.
- When playing music, double-click left earbud to return to the previous song.
- When playing music, double-click right earbud to next song.
Volume Control
Long press right earbud to turn up the volume, Long prese left earbud to turn
down the volume,
Reset process
If you encounter a technical problem, try to resot your earbuds by follbwing these steps in order.
- Forget the device” from your Bluetooth device settings.
- Place both earbuds in the case,
- Quickly tap 5 times on both earbuds simltaneously.
- The LED light will blink green one time, then go back to red.
- Take out both earbuds and pair them again with your device,
FCC WARNING
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation. Any changes or
modifications not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>