hama Wireless Charger QI-FC15S Instructions

hama Wireless Charger QI-FC15S Instructions

Operating Instructions

Controls and displays

1. USB-C input
2. Status LED
3. Touch sensor for LED display
4. Stand
5. 230 V quick-charging device

LED function indicator

Power supply| Solid red
Standby| Solid red
Charging process| Lights up pulsing blue
End of charging| LED goes out 1)
Error message| Flashes alternately red and blue

1. The display at the end of charging may differ on some devices, depending on the manufacturer.
   Thank you for choosing a Hama product.
   Take your time and read the following instructions and information completely. Please keep these instructions in a safe place for future reference. If you sell the device, please pass these operating instructions on to the new owner.

1. Explanation of warning symbols and notes.

Risk of electric shock

This symbol indicates a risk of electric shock from touching product parts carrying hazardous voltage.

Warning

This symbol is used to indicate safety instructions or to draw your attention to specific hazards and risks.

Note

This symbol is used to indicate additional information or important notes.

2. Package contents

• “QI-FC15S” Wireless Charger for Smartphones
• 1 x 230 V quick-charging device (please note 2nd operating instructions)
• 1 x USB-C cable
• These operating instructions.

3. Safety instructions

• Protect the product from dirt, moisture and overheating and use it in dry environments only.
• Do not drop the product and do not expose it to any major shocks.
• Do not operate the product outside the power limits specified in the technical data.
• Do not use the product in areas in which electronic products are not permitted.
• Ensure that the product is not covered up by textiles, metal or other objects in order to avoid damage caused by overheating.
• Dispose of packaging material in accordance with the locally applicable regulations.
• Do not modify the product in any way. Doing so voids the warranty.
• Use the product only for the intended purpose.
• Do not use the product in the immediate vicinity of heaters, other heat sources or in direct sunlight.
• As with all electrical products, this device should be kept out of the reach of children.
• Only use the article under moderate climatic conditions.
• Do not use the product in a damp environment and avoid splashing water.
• The product is intended only for use inside buildings.

Risk of electric shock

• Do not open the device or continue to operate it if it becomes damaged.
• Do not use the product if the AC adapter, adapter cable or power cable is damaged.
• Do not attempt to service or repair the product yourself. Leave any and all service work to qualified experts.

Do not place any bank or similar cards with magnetic strips or magnetically sensitive objects on the product.
The data on the cards could be damaged or completely deleted.

Warning

Ensure that there are no metal parts (e.g. metal plate for magnetic holders) on the back of your device. Metal heats up significantly in the field of an induction charger and can damage your device and/or the charger.

4. Start-up and operation

Warning

• Only operate the product from a socket that has been approved for the device. The socket must be installed close to the product and must be easily accessible.
• Disconnect the product from the power supply using the On/Off switch – if this is not available, unplug the power cord from the socket.
• If using a multi-socket power strip, make sure that the total power consumption of all connected devices does not exceed the power strip’s maximum throughput rating.
• If you will not be using the product for a prolonged period, disconnect it from mains power.

Note

• To be able to charge your device via the wireless charger, it must be compatible with induction charging technology. For more information, please refer to the operating
  instructions of your device.

• Note that mobile phone cases, covers, etc., and other materials between the wireless charger and the back of your device may interfere with or even prevent the charging
  process.

• Fold the stand (4) in or out, depending on whether you want to use it flat as an inductive charger or as a stand.

• Connect the enclosed USB-C cable with the USB-C input (1) on the inductive charger and the USB output on the enclosed quick-charging device. When doing so, consult the operating instructions for the USB charger.

Note

• The maximum charging current of up to 15 W is guaranteed with the enclosed Qualcomm quick-charging device.
•  An active power supply is confirmed by the status LED (2) lighting up red.

Warning

• Do not use defective chargers or USB ports and do not attempt to repair them.

• Place your device with its back on the inductive charger (B).

• The charging process begins as soon as an effective induction field has been established.
  The status LED (2) lights up pulsing blue. The current charge status is displayed on your device.

• If no induction connection can be established, change the position of your device if necessary (B).

• The charging process ends automatically once your device’s battery is fully charged. The status LED (2) goes out.

Note

The LED display can, if required (e.g. so as not to be disturbed at night) be activated or deactivated using the touch sensor for the LED display (3) located on the back.

5. Care and maintenance

Only clean this product with a slightly damp, lint-free cloth and do not use aggressive cleaning agents. Ensure that no water is able to enter the product.

Note

Disconnect the device from the mains before cleaning and during prolonged periods of non-use.

6. Warranty Disclaimer

Hama GmbH & Co KG assumes no liability and provides no warranty for damage resulting from improper installation/mounting, improper use of the product or from failure to observe the operating instructions and/or safety notes.

7. Technical data

LED function indicator

Power supply| Solid red
Standby| Solid red
Charging process| Lights up pulsing blue
End of charging| LED goes out 1)
Error message| Flashes alternately red and blue

8. Recycling information

Note on environmental protection:

Following the implementation of European Directive 2012/19/EU and 2006/66/ EU into the national legal systems, the following applies:
electrical and electronic devices as well as batteries must not be disposed of with household waste. Consumers are obliged by law to return electrical and electronic devices as well as batteries to the designated public collection points or to the point of sale at the end of their service lives. Detailed information on this topic is defined in the national laws of the respective country. This presence of the above symbol on the product, operating instructions or package indicates that the product is subject to these regulations. By recycling, reusing the materials or other forms of utilising old devices/ batteries, you are making an important contribution to protecting our environment.

9. Declaration of Conformity.

Hama GmbH & Co KG hereby declares that the radio equipment type [00187262] complies with Directive 2014/53/EU. The full text of the EU declaration of
conformity is available at the following internet address: www.hama.com -> 00187262 -> Downloads.

Read More About This Manual & Download PDF:

References

• hama.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>