Pyle PDA20BT Bluetooth HiFi Mini Audio Amplifier-Class D-User Guide

Pyle PDA20BT Bluetooth HiFi Mini Audio Amplifier-Class D

Specifications

• POWER OUTPUT: 200W
• POWER SUPPLY: 24V 4.5A
• POWER SUPPLY RANGE: 12V – 25V
• THD: ≤ 0.5%.
• FREQUENCY RANGE : 20Hz – 20kHz (±1 dB);
• SNR: ≥ 95dB;
• INPUT SENSITIVITY: ≤ 280mV;
• WIRELESS BT TRANSMISSION DISTANCE: 30ft;
• TERMINATING IMPEDANCE: 20hm – 80hm;
• POWER SUPPLY: 24V 4.5A
• CONSTRUCTION MATERIAL: Aluminium
• POWER CORD LENGTH: 9 ft.
• PRODUCT DIMENSION (L x W x H): 24’’ x 3.62’’ x 1.62’’

Introduction

Pyle PDA20BT is a mini audio amplifier that comes with a number of impressive features. It is a desktop audio amplifier that allows you to control sound with hi-powered, mini-style component stereo amplifier performance.

It features a multi-channel amplifier design and compact sound control. This audio amplifier allows you to connect and play your music with speakers and radio systems. The amplifier has the ability to give a power of rating 200 Watt with 100W RMS.

The amplifier features a ¼”headphones jack allowing you connect headphones for private listening. The audio amplifier features front panel rotary controls. It has Bluetooth for wireless audio streaming ability and comes with an antenna to extend Bluetooth wireless range.

What’s in the Box

• Stereo Amplifier System
• 24V/4.5A Adaptor
• Wireless BT Antenna
• AC Power Cord

Quick Setup

Front Panel

Rear Panel

1. Main Power ON Switch: Switch ON/OFF the amplifier by using this switch.
2. TREBLE KNOB: Adjust to boost or cut HIGH frequencies.
3. BASS KNOB: Adjust to boost or cut LOW frequencies
4. Master Volume: Adjusts main audio system volume level.
5. Input LED: RED–LINE input model Green–Wireless BT input model.
6. RCA L/R LINE Input: Lets you connect the desired LINE input source.
7. Banana Type Speaker L/R Terminals: Lets you easily connect speaker wires directly to the Amplifier.
8. POWER In Jack: Connect the adaptor DC.
9. Wireless BT Antenna: Wireless BT Streaming receiver

Setup and pairing (Wireless BT amplifiers) are really easy. The following instructions will help you connect Audio Amplifiers to your music system or pair with your tablet, computer, or smartphone.

Connecting the Speaker Wire
Audio stereo power amplifiers that will power one pair of passive speakers between 4 and 8 ohms (or subwoofer if you got the 2.1 CH amp or subwoofer amp). To connect the amplifier to your speakers you will need 2-conductor stranded speaker wire. The amplifiers use high-quality binding posts that will accept heavy gauge bare wire banana plugs, spade lugs, or pin terminators. If you use your own speaker wire we recommend using at least 16 gauge wire and using the same length of wire from the amplifier to each speaker It’s also a good idea to turn off your amplifier before connecting power, audio sources or speakers.

Preparing the Speaker Wire

1. Separate the last 3″ of each speaker wire conductor.
2. Strip 1/2″ of insulation from the end of each wire.
3. Twist the exposed copper strands with your fingers 3 or 4 times so the strands stay together.

NOTE
As you make your connections, be sure to connect the positive (+) terminals on your amplifier to the positive (+) terminals on your speakers. Even if your wire does not have (+) or (-) markings, most 2-conductor speaker wire has printing on one side to help you differentiate between the wire pairs.

If you are Using Bare Wire

1. Use your thumb and finger to unscrew the binding post connectors on the back of each speaker.
2. Insert each speaker wire into the holes on the side of the binding post connectors, observing proper polarity.
3. Retighten the binding posts with your fingers.
4. The stripped portion of the wire should be secured firmly in each connector.
5. Make sure that none of the speaker wire strands have come in contact with an adjoining terminal.
6. Connecting the Power Supply

Be sure that the volume/power switch on the front panel is in the OFF position by rotating it counter clockwise.
Connect the cable with the round end from the power supply to rear panel power connector. Connect the AC power cable from the power supply to a power outlet and verify that the indicator light on the power supply is illuminated. We recommend using a high-quality surge suppressor and/or AC line later on all electronics equipment.

Connecting Audio Sources

• Using the appropriate audio cable (RCA cable), connect your audio source(computer, iPod, etc.) to the amplifier audio inputs.
• If you got the Wireless BT amplifier and want to connect the amplifier to the audio source via Wireless BT, you can pair them when the amplifier is turned on. Audio Wireless BT amplifiers can connect to only one device at a time; however, they will remember the devices they connected, they will auto-paired at next time.

NOTE:
Audio Wireless BT amplifiers have the “BT” and “AUX” selector, you can choose the input way when you connect the audio source. The RCA input will interrupt, so if you want to connect the amplifier with RCA input, you need interrupt the Wireless BT connection from your Wireless BT device.

Operation
Turn on the amplifier volume/power knob and set the volume control to an initial setting of about 3 o’clock. The front panel power indicator will be illuminated. Turn on your audio input source and adjust the volume to your desired listening level.

Features

• Compact and Powerful Mini Amp System
• With bass and treble volume control
• Wireless BT Receiver for Wireless Audio Streaming Ability
• RCA (L/R) Audio Input
• Connect & Stream Audio from External Devices
• Banana Speaker L/R Terminals
• Front Panel Rotary Controls
• Antenna for Extended Wireless BT Range
• Power ON / OFF Switch

Wireless BT Connectivity

• Simple & Hassle-Free Pairing Ability
• Works with All of Today’s Latest Devices (Smartphones, Tablets, Laptops, Computers, etc.)
• Wireless BT Network Name: ‘PYLEUSA’
• Wireless BT Version: 5.0
• Wireless Range: 30’+ ft.

FREQUENTLY ASKED QUESTIONS

• Do the output speaker terminals twist so that un-terminated speaker wire can be used?
  You can twist it to allow for the insertion of a standard speaker cable, yes. Visit website, pyleaudio.com, to view the unit’s further specifications. For further information, enter the model number PDA20BT in the search box.

• Will this be enough for a set of two Polk Atrium passive speakers?
  Yes, it will be enough for a set of two Polk Atrium Passive speakers.

• Will this push 2 200-way speakers?
  Yes, it can push 2 200-way speakers.

• How do i connect to bluetooth?
  When you turn on the device, the LED bulb will turn green. This indicates that the amplifier is ready for pairing.

• Can I remotely switch between bluetooth and RCA and back?
  Yes, it is automatic meaning once you disconnect the Bluetooth, it will automatically go to RCA input.

• Would this work well to power outdoor speakers?
  Yes, the amplifier works perfectly fine to power outdoor speakers.

• I intend to use an echo dot via line in as main source. will other bluetooth devices still connect or must the dot be disconnected?
  In order to allow the other device to connect the amplifier, you must first disconnect your Amazon Echo from any Bluetooth connections.

• Would this work well with a couple Dayton Audio exciter speakers?
  Yes, it will work with the Dayton Audio exciter speaker.

• Are the feet screwed on? Is the amplifier mountable?
  Yes, it is fastened to the bottom portion and cannot be mounted unless a custom bracket is made.

• Does it come with a power supply?
  Yes, it comes with a power supply.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>