Shenzhen Lobo Future Technology F9 Wireless Bluetooth Headset Instructions
- June 5, 2024
- Shenzhen Lobo Future Technology
Table of Contents
Lobo Future Technology F9 Wireless Bluetooth Headset
Instructions
Specification of Earbuds
- Product Name: B I Bluetooth earphones
- Wireless version: V5.1
- Protocol: Supports HFP 1.7, HSP 1.2, AVRCP 1.6, SPP 1.2 and PBAP 1.0
- Speaker Diameter: 8mm
- Working distance: 10m-20m
- Call Time: 5-6H (1 time full charged)
- Play Music Time: 5-6H (1 time full charged)
- Standby time:650H (With charger case)
- Frequency:2402MHz-2480MHz
- Battery type: 3.7V, >50mA Li Battery
- Charging Time: 1-2H
- Working Temperature: -10°-55°
Specification of charger case:
- Input current: 5V-1A
- Output current: 5V-1A
- Battery type: 3.7V
- Charging time:1-2H
How to operate the earbuds:
- Make sure that the charging case has electricity. If the charging compartment is out of power, please fully charge the Learning compartment;(Pick up the two earbuds and put them back on the cover. The charging compartment indicator lights up to indicate that there is power. If it does not light, it means no power.)
- Take the two earbuds out of the charging case and wear them on the left and right ears respectively. The earphones will automatically turn on and automatically pair;(Voice prompt: power on, left channel, right channel, waiting for connection).
- Turn on the phone Bluetooth and click on the connection pair online ” TWS ” to connect (voice prompt “Connected”).
How to pairing
Enter into the Settings| Select Bluetooth in your device| Turn on Bluetooth in your device settings Select -news ” in your devices| Bluetooth Paired Bluetooth settings to connect
Warming remain
For the first time use the earbuds or for a long time to no use, please charge
the charging case and earphones before, Please keep it in an unobstructed and
effective environment within 10 meters. Otherwise, it may be stuck and
disconnected.
Indicator Description:
-
Charge the earbuds: Put the earbuds into the charging case and cover it to charge. earbuds indicator: Lights up red when charging, and red light when fully charged. The charging case flashes green and the light is off after charging.
-
Charge the charging case: Plug the 5V/1A USB into the charging port to charge. During charging, the middle digit of the charging stand display indicates the charging case power. When the number is displayed as “100” , the battery is fully charged.
Charging case indicator light: The charging flashes green light, and the light is off after charging. -
Charge to the mobile phone; 3 Charge the mobile phone: Connect USB Cable to USB port of case to charge the mobile phone. charging case indicator light: The light will turn green when charging and turn off when fully charged
In master-slave synchronous binaural mode, double-click on one of the
headphones is the previous song, and double-click the other headset is the
next song!
The functions of volume + / –
are as follows: quickly triple-tap “a” for volume +, and triple click “B° for
volume-
Single Earbud Mode
Version 5.1 can achieve seamless connection, and master-slave synchronization,
with no need to distinguish the primary and secondary. At present, single-ear
use does not need to switch signals, only need to connect a good signal name
for the first time, and then taking out any earphone, can automatically
complete the connection. There is no need to pair single ear connections
separately. If a single ear signal is connected separately, which makes it
impossible to use both ears, you only need to delete one ear signal, Team up
again manually once again!
Headset signal name
“L” Headset signal name: This
“R” Headset signal name: Two
If you can’t use both ears, you just need to delete the single ear signal and
manually form a team again! (team building method: turn on two headphones at
the same time, double-click any one of them, wait until one of the headphones
lights out, and then it is finished.)
Special Note: The two earbuds are well-paired before packaged, but if
they can not be paired well due to some wrong operations, pls. do as following
steps to re-pair the earbuds. Power of the two earbuds, then press the button
of the two earbuds at the same time and do not release for about 10s, blue
lights sparkled —-> red and blue lights sparkled alternatively —> release
—>two earbuds are in the situation of paired, and they are ready for phone
searching.
Note: This operation also clears the team record between the phone and
the earbuds, so you need to delete the Bluetooth pairing record before the
phone and then search for the connection again.
Care and maintenance:
- To avoid any misoperation caused by collision put the earbud in the charging case before put in your pocket
- Do not use an abrasive cleaner to clean the Bluetooth earbuds.
- Do not expose the Bluetooth earbuds to excessive temperature.
- Do not expose the earbud to the blazing sun for a long time
- Do not let the Bluetooth earbuds be close to the fire source.
- Do not drop, bump, scratch, twist, tap, crush, or put into the water.
- Keep away from magnets, appliances, and speakers when using Bluetooth earbuds.
- Do not place the Bluetooth earbuds in extreme temperatures (use ambient operating temperature range -10°C-55°C)
- Do not expose the Bluetooth earbuds to moisture.
- If you do not use the Bluetooth earbuds for a long time, please charge it fully and charge it once a week to extend the life of the Bluetooth earbuds.
Safety guidance:
- please use the standard SV charger (4S-5.5V)
- Do not place the charging case and the Bluetooth earbuds next to the flammable explosives.
- Do not disassemble the charging case and Bluetooth earbuds, or insert other items into the product to avoid damage to the product or even cause harm to you.
Serious warning:
Do not use this product while charging. Please use the adapter specified by the manufacturer to charge the product. Do not disassemble the built-in lithium battery. Do not let the metal contact or short the electrode. Do not touch or squeeze the battery to avoid Place in a humid or hot (>60 ° C) environment.
Warranty Card
The warranty certificate, please fill in and keep it safely
Product Name…………………………
Sales date………………………………..
Shop……………………………………………
After-sale service………………………….
Packing details:
| Item Name | Quantity |
|---|---|
| Bluetooth earbuds | 2 pcs |
| Charger case | 1 pcs |
| User manual | 1 pcs |
| Eartips | 2 pcs |
| Use charger line | 1 pcs |
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses,
and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and receiver.
— Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
— Consult the dealer or an experienced radio/TV technician for help.
Warning: Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment
The device has been evaluated to meet general RF exposure requirements the
device can be used in portable exposure conditions without restriction
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>