BESSEY STE370 Telescopic Drywall Instructions

BESSEY STE370 Telescopic Drywall

DIMENSIONS

Please read the instructions for use carefully and keep it in a safe place.

Instruction manual

1. In order to pre-set the telescopic drywall support, extend the telesco-pic inner tube to the desired length. In order to simplify the extension, the quick-release button can also be pressed.
2. Fine adjustment takes place by actuating the pump lever until the contact surface is in contact with the workpiece (preload). Meanwhile, the workpiece to be fixed can be held with the free hand.
3. Now turn the pre-set telescopic drywall support clockwise at the handle until the desired holding force is reached.
4. To release it, turn the telescopic drywall support anti-clockwise again. As soon as there is no longer any holding force, press the quick-release button and retract the inner tube to the desired position.

Note:

• Please use the telescopic drywall support only on flat and clean surfaces.
• Periodically – at least after 10 uses – check the entire tool of damage and proper operation of all moving parts. Damaged tools must not be used.
• Telescopic drywall supports must not be loaded in excess of the indicated maximum permissible load.

Warning

Clamping tools are not suitable for lifting, pulling or transporting. Clamping tools may only be clamped manually without using any auxiliary tools. Improper use can cause personal injuries or material damage.
Please be advised that claims against our company arising from an agreement or from an unlawful act, in particular product liability claims for injury or property damage, are invalidated by failure to heed our instructions and warnings.

Using

References

• BESSEY Group

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>