T D TR41A Bluetooth Thermo Recorder Instruction Manual
- June 5, 2024
- T D
Table of Contents
Bluetooth® Thermo Recorder
TR4Aseries
Model No. TR41A,TR42A,TR43A,TR45
Instruction Manual
Safety Instructions and Specifications
Thank you for purchasing our product.
Please read carefully the following safety instructions and specifications to
prevent damage to personnel and property, and to ensure the safe and proper
use of this product.
Explanation of Symbols
DANGER
These entries are actions that, if taken, may cause serious personal physical
damage or death.
CAUTION
These entries are actions that if taken may lead to physical injury or damage
to persons or things.
Denotes an important warning or caution.| Denotes a forbidden action.|
Denotes an action that should be carried out.
---|---|---
DANGER To Prevent Serious Accidents
| Do not disassemble, repair or modify the unit.
---|---
| Do not use the unit in any environment that is exposed to chemicals and
harmful gases. Doing so may cause corrosion and/or other danger to the
product. Also, coming in contact with hazardous substances may cause bodily
harm to the user or people nearby.
| The TR45 and temperature-humidity sensors (for TR43A) are not water-
resistant. Only use in an environment where there is no condensation or
possibility of becoming wet. If liquid enters the product, immediately remove
the battery and stop using it.
| If the unit is subjected to significant temperature change while wet, it may
cause condensation inside the case. Especially be careful with temperature
changes from high to low; if the unit has condensation on the inside, it may
cause malfunction, damage, and/or unexpected accidents.
| Do not insert or replace batteries or sensors with wet hands.
| Do not touch the product, sensor cable, or AC adaptor during thunder and
lightning. Doing so may cause electric shock.
| Please be careful not to touch the product or sensor during or after use in
overly hot or cold environments. It may cause burns or frostbite.
| This product has been designed for private and/or industrial use only. It
should not be used in situations where strict safety precautions are necessary
such as with medical equipment, or in systems directly or indirectly connected
with human life or well-being.
| Do not drop or expose the unit to a strong impact.
| Do not cut or process the sensor cables. Also, do not twist, pull on or
swing them.
| To prevent damage to the unit from static electricity, remove static
electricity from your body by touching metal around you (such as a doorknob
and window frame) before touching the unit.
| Store the unit and battery out of the reach of children.
| Do not use any sensors other than those specified by T&D Corporation.
| Make sure the sensor is inserted fully, so as not to cause an improper
connection. Also, when unplugging the sensor from the unit, do not pull the
cord, but hold the connector to disconnect.
| If the unit produces heat, emits smoke or a strange smell, or makes an
unusual noise, immediately remove the battery and stop using it.
| Check the rubber packing inside the case for deterioration, damage, dust,
and dirt, and periodically replace it with silica gel.
| Contact with oil may cause cracks to appear in the casing of the unit. When
using this unit in environments where such oils are present, please
ensure that it is protected from contact through the use of a polyethylene
bag or other means.
DANGER Places NOT Suitable for Installation and Storage
- Areas exposed to excessive vibration
- Areas exposed to excessive smoke, dust, or dirt.
- Areas exposed to direct sunlight
- Areas subject to direct flames or heaters, as well as areas in which hot air accumulates and creates extremely high temperatures
- Areas exposed to static electricity
- Areas exposed to strong magnetic fields
CAUTION About the Sensors
Temperature Sensor TR-5106 (Provided with TR42A)
- Do not bend or press the last 5cm to the tip of the sensor, as this may damage it.
- Insert the sensor tip to at least 5cm or more to obtain an accurate temperature measurement.
- Use the sensor within its resistance range (-70 to 180°C).
Temperature-Humidity Sensor THB3001 (Provided with TR43A)
- This sensor is not water-resistant. Do not expose to condensation, dampness, corrosive gases, or organic solvents. If the sensor gets wet, immediately remove the sensor from the unit and wipe it with a clean cloth as soon as possible. Then allow the sensor to dry at normal room temperature before using it again.
- Do not expose the sensor to a strong impact. This may adversely affect measurement accuracy and cause damage or malfunction.
- Continued use may cause a decrease in the sensor’s accuracy and sensitivity even under normal operational conditions. Periodic calibration may be required.
- When the sensor is not to be used for a long period of time, please store it at normal temperature and humidity.
CAUTION Others
- Use the unit and the sensor in the specified operating environment, and do not use for any other purposes than those intended.
- Do not allow dust or foreign objects to get into the sensor jack.
- If the product gets dirty, wipe it with a clean cloth.
- Battery terminals may provide insufficient contact due to age or vibration. This may lead to data loss.
- Please be careful not to let a third party know of your registration code. The registration code cannot be reissued or changed.
CAUTION About the Lithium Battery
-
Do not install the battery in the wrong direction. Doing so may result in product malfunction, battery leakage, overheating, or explosion.
-
- Do not short the battery with metal objects. Doing so could cause leakage, overheating, fire or explosion. When carrying or storing batteries, avoid direct contact with metal objects by putting them in a separate container.
-
If battery fluid gets on your eyes, skin, or clothes, wash thoroughly with clean water. See a doctor immediately if it gets in your eyes.
-
This battery is non-rechargeable and should not be recharged
-
Do not use any other batteries than those that are specified in this Manual. There is a risk of explosion if the battery is replaced by an incorrect type.
-
If the unit is not to be used for a long period of time, remove the battery. If left in the unit, the battery may leak and lead to malfunctioning.
-
Do not remove or reinsert the battery once it has been set; continue using it until the battery power is depleted.
Always use a new battery for replacement. -
Do not put the battery in a fire, attempt to heat it, disassemble, or deform it. Do not place the battery on or near fires, or other high-temperature locations. Doing so may cause the battery to overheat or ignite.
-
Do not expose it to strong impact or throw it.
-
Do not expose to extremely low air pressure, as this may result in explosions or leakage of flammable liquids and gases.
-
Immediately disconnect the battery if, during operation, the battery emits an unusual smell, feels hot, changes shape, or appears abnormal in any other way.
-
Dispose of batteries in accordance with local regulations.
-
Use in high or low-temperature environments will result in a shortening of the battery life as shown below. In environments of 60℃ or higher, not only will battery life be shortened but the unit itself and its parts will deteriorate more rapidly. Please do not use it in such environments for prolonged periods of time. -20℃:one half of life
compared to normal temperatures -30℃:one third of life compared to normal temperatures 60℃:one half of life compared to normal temperatures -
When using lithium batteries other than LS14250 produced by SAFT, such as CR2, product specifications cannot be guaranteed nor can the performance of some functions, such as the battery warning function.
-
Please avoid using the CR2 in the following situations: Using the unit in an environment below 0 °C or above 60 °C
Exposing the CR2 to continuous vibration such as in transportation
Compliance Information
< For FCC Model>
FCC and ISED Statement
This device complies with part 15 of FCC Rules and Innovation, Science and
Economic Development Canada’s license-exempt RSS(s).
Operation is subject to the following two conditions: (1) this device may not
cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
FCC Class B Statement
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning
the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
– Consult the dealer or an experienced radio/TV technician for help.
FCC Caution:
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
This transmitter must not be co-located or operated in conjunction with any
other antenna or transmitter.
ISED Class B Statement
This Class B digital apparatus complies with Canadian ICES-003.
FCC/ ISED Radiation Exposure Statement
This equipment complies with FCC/ISED radiation exposure limits set forth for
an uncontrolled environment and meets the FCC radio frequency (RF) Exposure
Guidelines and RSS-102 of the ISED radio frequency (RF) Exposure rules. This
equipment should be installed and operated keeping the radiator at least 20cm
or more away from the person’s body.
< For EC Model>
CE Statement
Hereby, T&D Corporation declares that the radio equipment type TR4A Series is
in compliance with Directive 2014/53/EU.
The full text of the EU declaration of conformity is available at the
following internet address: tandd.com/manual/
< Important Notice>
Wireless products cannot be used in countries other than where those products
have been approved for use, according to that country’s wireless
regulations.T&D Corporation shall in no manner whatsoever take responsibility
for the usage of these products, nor be liable in any manner for legal
consequences stemming from the usage of these wireless products in unapproved
areas.
Product Specifications
| TR41A| TR42A| TR43A| TR45
---|---|---|---|---
Measurement Channels| Temperature 1ch| Temperature 1ch| Temperature 1ch,
Humidity 1ch| Temperature 1ch
Sensor| Thermistor (Internal)| Thermistor| Thermistor| Polymer Resistance|
Thermocouple: Type K, J, T, S, R (Not provided)| Pt100, Pt1000
(3-wire, 4-wire1) (Available as an option)
Connection Terminal (M3.5)
Measurement Units| °C, °F| °C, °F| °C, °F| %RH| °C, °F| °C, °F
Measurement Range| -40 to 80 °C| -60 to 155 °C| 0 to 55 °C| 10 to 95 %RH| Type
K : -199 to 1370 °C Type J : -199 to 1200 °C Type T : -199 to 400 °C Type S :
-50 to 1760 °C Type R : -50 to 1760 °C| -199 to 600 °C
Accuracy| Avg. ±0.5 °C| Avg. ±0.3 °C
at -20 to 80 °C
Avg. ±0.5 °C
at -40 to -20 °C, 80 to 110 °C
Avg. ±1.0 °C
at -60 to -40 °C, 110 to 155 °C| ±0.5 °C| ±5 %RH
at 25 °C, 50 %RH
±0 • °C| Thermocouple Measurement (Sensor inaccuracies not included)
Type K, J, T :
±(0.5 °C + 0.3 % of reading) at -100°C or above
Type S, R :
±(1.5 °C + 0.3 % of reading) at 100°C or above
Cold Junction Compensation
at 10 to 40 °C
±0.8 °C
at -40 to 10 °C, 40 to 80 °C| ±(0.3 °C + 0.3 % of reading) at 10 to 40 °C
±(0.5 °C + 0.3 % of reading) *at -40 to 10 °C, 40 to 80 °C
*Note: The temperature range shown above () represents the operating
environment of the logger.*
Measurement Resolution| 0.1 °C| 0.1 °C| 0.1 °C| 1 %RH| Type K, J, T: 0.1 °C
Type S, R: approx. 0.2 °C| 0.1 °C
Responsiveness| Response Time (90%): Approx. 35 min.| Response Time (90%):
Approx. 80 sec. (in the air) Approx. 7 sec. (in agitated water)| Response Time
(90%): Approx. 11 min.| –| –
Logging Capacity| 16,000 readings| 16,000 readings| 8,000 data sets
(One data set consists of readings for multiple channels.)| 16,000 readings
Recording Interval| Select from 15 choices: 1, 2, 5, 10, 15, 20, 30 sec. or 1,
2, 5, 10, 15, 20, 30, 60 min.
---|---
Recording Mode| Endless (Overwrite oldest data when capacity is full) or One
Time (Stop recording when capacity is full)
LCD Display Items| Measurements (alternating display for multiple channel
devices), Recording Status, Battery Life Warning, etc.
Communication Interfaces| Bluetooth 4.2 (Bluetooth Low Energy)| Bluetooth 4.1
(Bluetooth Low Energy)
Communication Time| Data Download Time (full logger): Approx. 15 seconds| Data
Download Time (full logger): Approx. 1.5 minutes
Power| Lithium Battery (LS14250) x 1
Battery Life (2)| Approx. 1.5 years (3)| Approx. 1 year (3)
Dimensions| H 62 mm x W 47 mm x 0 19 mm (excluding protrusions and sensor)| H
62 mm x W 47 mm x D 26.5 mm (excluding protrusions and sensor)
Weight| Approx. 45 g| Approx. 50 g
Operating Environment| -40 to 80 °C
-30 to 80 °C during wireless communication| Temperature: -40 to 80 °C (-25 to 80 °C during wireless communication) Humidity: 90 %RH or less (no condensation)
Waterproof Capacity| IP67: Immersion proof| IP64: Splash proof (rated for use
in daily life) (4)| None
Accessories| –| Temperature Sensor TR-5106 I Temp-Humidity Sensor THB3001|
Cable Clamp
Lithium Battery LS14250, Registration Code Label, Strap, User’s Manual
(Warranty Included)
Software (5)| Mobile Applications 00S, Android) T&D Thermo, TR4 Report|
Mobile Applications (iOS, Android)
T&D Thermo, ThermoREC, ThermoStorage, TR4 Report
1: In the case of a 4-wire sensor, one wire will be left unused.
2: Battery life varies depending upon multiple factors including ambient temperature, recording interval, usage of applications, and battery performance. All estimates are based on operations carried out with a new battery and are in no way a guarantee of actual battery life.
3: Estimated battery life when recording data at an interval of more than 10 seconds and displaying a graph in the app once a day.
4: This is the waterproof capacity of the data logger with the sensor connected. Note that the temperature-humidity sensor is not water-resistant.
*5: Free app download and information on OS compatibility is available on the Software page of our website at tandd.com/software/
The specifications listed above are subject to change without notice.
Disclaimer In order to properly use this product, please carefully read all documents that accompany the product before using it.
- All rights of the attached documents belong to T&D Corporation. It is prohibited to use, duplicate and/or arrange a part or whole of the attached documents without the permission of T&D Corporation.
- Microsoft and Windows have registered trademarks of Microsoft Corporation in the United States and/or other countries.
- Google, Android, and Google Play are trademarks or registered trademarks of Google Inc. Apple and App Store are trademarks or registered trademarks of Apple, Inc. in the U.S. and other countries.
- The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by T&D Corporation is under license.
- All registered trademarks, company names, product names, and logos mentioned herein or for products being used are the property of T&D Corporation or of their respective owners.
- Specifications, design, and other contents outlined in the attached documents are subject to change without notice.
- Please follow the safety precautions outlined in the attached documents carefully. We cannot guarantee nor are we responsible for safety if this product is used in any manner other than was intended.
- We are not responsible for any damage, malfunction, or trouble, whether direct or indirect, caused by the use of our product.
- On-screen messages in the attached documents may vary slightly from the actual messages.
- Please note that this document has been written based on the presupposition that details about contracts with an Internet provider, specific network environments, and the set-up of any other necessary equipment to enable network connection have already been taken care of by the User and that connection has been confirmed as workable. T&D Corporation shall not be responsible for any damages that a contractor, a user, or a third party may suffer, whether- er direct or indirect, due to the inability to communicate or use communication devices.
- Please notify the shop where you purchased this product or T&D Corporation of any mistakes, errors or unclear explanations in the attached documents.
- T&D Corporation accepts no responsibility for any damage or loss of income caused by the use of our product.
- Accompanying documents cannot be reissued, so please keep them in a safe place. Please read the included warranty card and provisions for free repair carefully.
Warranty
Model Number|
---|---
Warranty Period| 1 year from the date of purchase| Date of Purchase|
Distributor’s Name|
The object of Warranty: Main Unit only (Sensors and all other options are not
covered under this warranty.)
For details about repairs, first, contact the distributor from which the
product was purchased.
Provisions for Free Repair
-
If the product does not work properly despite the fact that the customer used it properly and in line with the manual, the product shall be repaired free of charge through the distributor which sold the product.
-
If the customer requests free repair because of trouble within the warranty period, take the product along with this warranty to the distributor.
-
If the customer has moved after purchasing, or there are difficulties contacting the distributor from which the product was purchased, please contact T&D directly for service.
-
Free repair is not available in the following cases even though it is within the warranty period:
1. Trouble or damage was caused by the careless operation, natural disaster, fire, public pollution, or use of a power source other than specified.
2. If repair, adjustment, disassembly, or modification of the product has been carried out by a person other than a T&D authorized engineer.
3. Trouble or damage was caused by transportation, movement, or dropping of the product after purchase.
4. Failure to submit the warranty or failure to fill in all items required in the warranty. -
This warranty cannot be reissued.
This warranty only promises customers free repair within the period and conditions clarified in this warranty, but the customer’s legal rights are not limited by this warranty. For further information on repair and other service questions after the termination of the warranty period, contact your distributor.
| tandd.com/
FAX: +81-263-40-3152
E-mail: support@tandd.com
---|---
© Copyright T&D Corporation. All rights reserved. 2022. 05 16508310004 (1st Edition)
References
- Data Management Solutions | T&D Corporation
- Manuals & Help Downloads | Data Logger Products | T&D Corporation
- Software/Apps | T&D Corporation