D T QWC-A800 Wireless charger 5W User Guide

June 6, 2024
D T

D T LOGO

D T QWC-A800 Wireless charger 5W

D T QWC-A800 Wireless charger 5W
PRODUCT

What is in the box?

D T QWC-A800 Wireless charger 5W
FIG-1

  1. 5W Qi Changing pad
  2. A 3-ft micro-USB to the USB charging cable
  3. User Manual

Get to know your 5W Qi wireless charging pad

Wireless Charging Pad QWC-A800
Input Micro-USB, DC 5V/2A
Output 5W ( 5V / 1A)
Dimension 69mm*9mm

Compatibility

  1. Qi-enabled devices up to 5W
  2. Any Qi-compatible smartphones

D T QWC-A800 Wireless charger 5W FIG-4

How to charge your devices.

Connect Micro-USB cable with Charging Pad Insert Micro-USB connector of charging cable to Micro-USB port of charging padD T QWC-A800 Wireless
charger 5W FIG-5

Connect with Power Supply
Connect charging cable with charging pad to any power supply for charging.D
T QWC-A800 Wireless charger 5W FIG-6

  • Begin to charge
  • Remove any foreign object (if any)
    Example: Magnet or holderD T QWC-A800 Wireless charger 5W
FIG-7

If there is any foreign object detected, LED indicator will be flashing.

Thick protective case ﹥ 5mm or a case includes magnet or metallic material, may not allow proper charging function.D T QWC-A800 Wireless charger 5W
FIG-8

Do not place any credit card on the charging device.

Place your smartphone or any Qi-enabled device on the center of the charging padD T QWC-A800 Wireless charger 5W FIG-9

D T QWC-A800 Wireless charger 5W FIG-10

Caution
Avoid dropping Do not disassemble
No metal object between devices and wireless charging stand Thick protective case ﹥ 5mm or a case includes magnet or metallic material, may not allow proper charging function. Keep wireless charging stand away from any liquids or moisture The maximum ambient temperature during use of this product must not exceed 45°C. Do not place device in fire or other excessively hot environments. Only use dry cloth or brush to clean this product. Do not use if visible defects are observed on the wireless charging stand.

Warning
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment.

FCC Statements

This device complies with Part 15 of the FCC Rules Operation is subject to the following two conditions

  1. This device may not cause harmful interference, and
  2. This device must accept any interference received including interference that may cause undesired operation
    NOTE: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense. Any changes or modifications to equipment not expressly approved by the party responsible for compliance could void use’s authority to operate the equipment. The antenna(s) used for this device must be installed to provide a separation distance of a least 15 cm from all persons and must not be co- located or operating in conjunction with any other antenna or transmitter.

Need help?
We’re here for you every day from 7 a.m. – 9 p.m. South Korea, Give us a call at 82-42-360-8100

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals