CANMEIJIA XKL-Q5J Starry Sky Projection Light with Remote Control Instruction Manual
- June 5, 2024
- CANMEIJIA
Table of Contents
- CANMEIJIA XKL-Q5J Starry Sky Projection Light with Remote Control
- Basic functions
- Functional description
- Bluetooth connection method
- Play music operation
- Indicator light introduction
- Function introduction of remote Control
- Technical parameters
- Packing list
- Special remarks
- FCC
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
CANMEIJIA XKL-Q5J Starry Sky Projection Light with Remote Control
Basic functions
- Colorful lights
- Bluetooth Music
- usb drives play MP3 music
- Water wave laser star pattern light
- Built-in charging (optional)
Functional description
- On/OFF: Switch the product to the “OFF” position to shut down the product; Hit the “ON” position, and the product will start up. The default startup mode will be Bluetooth, and the stage lights will be dazzled.
- Mode switch: long-press Light mode the IGH key to turn on/off laser light, short press the LIGHT MODE key to turn on/off LED colorful light;
- Music control: previous music/Volume reduction button; Play/pause button Next song/Volume down button;
Bluetooth connection method
- Start up or press the mode key to switch into Bluetooth mode, and the Bluetooth will be emitted, and the LED indicator light will flash.
- Turn on the Bluetooth function of the mobile device (mobile phone, computer, etc.) and search for the Bluetooth device “XKL-Q5”.
- Click manually, and the device automatically matches and connects, and the successful connection will emit a “Bluetooth” sound.
- If the device has been successfully paired, the next switch will automatically connect.
Play music operation
When the machine starts up, it will automatically detect and identify the external device. After starting up, it will enter the Bluetooth mode by default and insert the USB flash drive to automatically recognize and play. The latter is preferred.
Indicator light introduction
- Red indicator light: charging indicator light indicates that the red light is on when the battery is fully charged and the red light is off.
- Blue indicator light: Bluetooth, USB flash mode indicator; Low power shutdown indicator light.
Function introduction of remote Control
Technical parameters
- Working voltage: DCSV
- Charging voltage: DC5V/500MA
- Bluetooth distance: 210 m
- Input sensitivity: 450+50mV
- Signal to noise ratio: 285dB
- Frequency response: 40HZ-18khz
- Distortion: <1%
- Power: MAX10W
Packing list
- Starry sky projection lamp 1 PCS
- Operation instruction 1 PCS
- USB cable 1 PCS
Special remarks
- As the laser is harmful to the eyes, you should not look directly at laser light with your eyes.
- Children under 8 years of age are prohibited from using the product alone without adult supervision (except for non-laser type).
- Please turn off the power when no one is using it for a long time.
- When the battery is low, the system will shut down automatically. Please charge it in time: if you do not use the unit for a long time, you can charge it at least once a month, which can protect the battery and extend the battery life.
FCC
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- this device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>