YUGUI Y030 Bluetooth Keyboard User Manual

YUGUI Y030 Bluetooth Keyboard

• It May be a little different with the final product, this may be the changes in the upgrade of our products; the product is subject to change without notice.
• The difference in Accompanying items and any of the available accessories may be due to the different areas.

Instruction icons

• WARNING: a situation that could cause injury to yourself or others.
  Caution: a situation that could cause damage to your device or other equipment.

• Disposal of Waste Batteries and Electrical & Electronic Equipment.

This symbol on the product or its batteries or its packaging means that this product and any batteries it contains must not be disposed of with your household waste. Instead, it is your responsibility to hand this over to an applicable collection and recycling will help to conserve natural resources and prevent potential negative consequences for human health and the environment due to the possible presence of hazardous in batteries and electrical and electronic equipment, which could be caused by inappropriate disposal. For more information about where to drop off your batteries and electrical and electronic waste, please contact your local city/municipality office, your household waste disposal service, or the shop where you purchased this product. This product contains a Lithium-ion Battery. This device is rated as a commercial product containing a Lithium-ion Battery.

Trademarks

Bluetooth is a registered trademark of Bluetooth SIG, Inc. All other trademarks are property of their respective owners.

Package Contents

Keyboard, Micro-USB charging cable, User Manual.

Getting Started Guide

OFF/ON Button

On/Off slider switch: slide switch ON or OFF to control the device power turn on or turn off.

Switch Button

Turn on: Press the ON-OFF key for 3 seconds, The indicator light will be on for 3 seconds and then the light will go off, Press the key one more time, and it will be under the status of ready to pair with your device, the [Bluetooth] indicator light will be blinking, when Bluetooth connecting is done, the blinking light will turn off.

Turn off: press and hold the ON-OFF key for 3 seconds, and the indicator light will be blinking again. Then release it, and it is turned off. O

Connect Button: Bluetooth connect button: The On/Off switch is already in the On position, Press on the [connect] button, and The keyboard is now ready to be connected to your Press on the [connect] button, The keyboard is now ready to be connected to your device. (Part of the device into the matching state for the FN + C key)

Status Light

Power Light
Battery status light: Slider the power button on. The red status light will illuminate for 1-3 seconds and then turn off to save power. Your keyboard is still on. (Some devices show different times)

Bluetooth Light (BT)
Bluetooth status light: Press on the [Connect] button. The [Bluetooth] status light will blink blue, the indicator light will stay on until the keyboard connects with your device. (Part of the device for FN+C into the pairing) Caps Lock Light Caps lock light: The status light stays on when under the uppercase.

Charging Light
Charging light (red): turns on when charging, turns off when fully charge. (Some devices are green to indicate charging is complete)

Function Keys

Take Android (Samsung) and Windows (Surface) as priority operation systems, and IOS (iPad) as complementary operation systems.

Note: This table icon is for reference only, please refer to the actual product.

Steps of pairing the keyboard with your IOS device

1. On the keyboard, slide the power button on. The blue status light will still be on.
2. Press the [connect] button, the [Bluetooth] indicator light will be blinking blue.
3. On the iPad, select Setting-General-Bluetooth-On.
4. The iPad will display “Bluetooth 3.0 Keyboard ” as an available device.
5. Select “Bluetooth 3.0 Keyboard” on the iPad; the iPad will display a code. 6: Type the code on the keyboard and press enter; the keyboard will now be paired to iPad. (Or pair without a password)

Pairing Steps with your Android device

(take the Samsung tablet for example)

1. Get into the applications page.
2. Find the “SETTING” icon, turn Bluetooth on, and search Bluetooth device.
3. Turn keyboard Bluetooth on. Find the keyboard Bluetooth name on a screen, and click it. (Or pair without a password)
4. Input the pairing code displayed on the screen and press Enter key.

Pairing Steps with your Window system device

(take a Surface tablet for example)

1. Get into the applications page.
2. Find the SETTING icon, turn Bluetooth on, and search Bluetooth device.
3. Click the “change the table setting”.
4. Find the keyboard Bluetooth name on a screen, and click it.
5. Input the pairing code displayed on the screen and press Enter key. (Or pair without a password)

Charge the batteries

Turn on the Bluetooth keyboard.
Battery status light green: the battery has an adequate charge.
Battery Status light red: recharge the battery. Go to the following step:

1. Plugs the Micro-USB charging cable into the keyboard.
2. Plug the USB port on a computer or power adapter.
3. Charge for 1 to 3 hours. Or until the Battery status light turns off.

Caution:

1. When not in use for a long time, we suggest closing the keyboard power, to extend battery life.
2. In order to obtain a longer battery life, the keyboard power lights flash to recharge the keyboard.

Energy-saving sleep mode

Keyboard’s long-life battery lasts for several weeks of normal use. The keyboard will go into sleep mode if left on and not being used; press any key and wait a second or two to bring it out of sleep mode.

Safety Caution

1. Keep the item away from sharp objects.
2. Do not place heavy objects on the keyboard.
3. Away from microwave items.
4. Do not force or distorted the keyboard.
5. Keep away from oil, chemical, or other organic liquid, items.

Troubleshooting

1. Make sure the keyboard is on (the power indicator is shining).
2. Make sure the keyboard is within operating distance (within 10 meters).
3. Ensure the battery storage has power.
4. Make sure the Bluetooth in the tablet pc is on.
5. Press the key “connect”, and check the Bluetooth status.
6. Ensure the wireless keyboard has already matched with Bluetooth.

Disposal of Waste batteries

Insert a screwdriver between the plastic top and metal case at the keyboard top or bottom Pry up the plastic top and remove it completely. This action destroys the keyboard and separates the battery from a circuit board, it is your responsibility to hand this over to an applicable collection and recycling will help to conserve natural resources and prevent potential negative consequences for human health and the environment due to the possible presence of hazardous in batteries and electrical and electronic equipment.

Table of Toxic and Hazardous Substance/ Elements and Their Content

According to China (Electronic information products pollution control measures)

Stands for this toxic and hazardous content in homogeneous material is under the SJ/T11363-2006 Standards limits X=stands for this toxic and hazardous content in homogeneous material is
beyond the SJ/T11363-2006 Standards limits. Under the ingredients with “X” in the form, all are up to ROHS “on 27 January 2003 the European Parliament and the council announce electronic equipment in limiting the use of certain hazardous substances directive 2002/95/EC”
Note: the environmental protection using period reference standard depends on the product of regular work temperature and humidity conditions

Product Specification

Y 030 Bluetooth keyboard

Standard Micro interface
Operating distance up to 10 meters
Modulation system: GFSK
Operation voltage: 3.0V-3.3V
Operating current: <2.5mA
Standby current: <0.3mA
Sleep current: <40uA
Charging current: 200mA
Standby time: <120 days
Charge time: 2~3 hours
Lithium battery capacity: 150mA
United working time: >60 hours
Lithium battery life: 3 years
4.02030mm
Keying force: 60±10g
key life: 3 million strokes
Operating temperature: -10 ~ +55°C
Number of keys: JP028 59 keys, JP030 78 keys, JP033 64 keys

Warranty

We warranty for (1) year from the date you purchased our keyboard from an authorized retailer (“Express Microsoft Period”), We warrant that our product or Accessory will not malfunction due to a defect in materials or workmanship under Normal Use Conditions.

FCC Warning

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

NOTE
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

NOTE
Any changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>