boAt IMMORTAL171 Wireless Gaming Earbuds User Guide

boAt IMMORTAL171 Wireless Gaming Earbuds

Specifications

• Model: [Insert Model Number]
• Compliance: FCC Part 15
• Operation Conditions: Subject to exposure condition without restriction

Maintenance
Regularly clean the device using a soft, dry cloth to prevent dust buildup and maintain its appearance.

FAQ

Q: What should I do if the indicator light does not turn on when powering on the device?
A: Check the battery level and ensure it is adequately charged. If the issue persists, contact customer support for further assistance.
Q: Can this device be used outdoors?
A: Yes, this device can be used outdoors; however, ensure it is protected from extreme weather conditions to prevent damage.

IMMORTAL 171
Get ready to immerse yourself in musical bliss with your very own pair of boAt Immortal 171. Please consider this manual as your guiding map toward the unparalleled shores of musical bliss. Knowledge of Bluetooth and device connectivity is essential for steering this boat and therefore we strongly recommend thorough reading of this manual. Also, you may refer to the same at times when you face any sort of difficulty.

PACKAGE CONTAINS

• 1x Pair of TWS Earbuds
• 1x Charging Case
• 1x Type-C Charging Cable
• 2x Pairs of Extra Earmuffs
• 1x User Manual
• 1x Warranty Card
• 1x Catalogue
• 1x FAQ Card

POWER ON (FIRST TIME USER)

1. Step 1: To switch the earbuds on (Smart Power On) simply open the lid of the charging case (when earbuds are inside). Courtesy our IWP™ (Insta Wake N’ Pair) technology, the earbuds power on automatically, get connected and enter the connection mode OR Long touch the CTC (Capacitive Touch Control) on both earbuds for 3 secs to manually power on the earbuds.
2. Step 2: After powering on, the earbuds enter the Connection Mode, indicated by alternate red and blue LED flashes.
3. CONNECTION MODE
4. Step 3: Turn on the Bluetooth functionality on your phone/media device & scan
5. Step 4: Search for ‘Immortal 171’ and pair accordingly

Congratulations! Your earbuds are now connected successfully via Bluetooth

Note :

• Pairing mode lasts for 5 minutes. If the pairing time is missed, then you will need to reconnect the earbuds and follow the above-mentioned procedure.
• Immortal 171 remembers previous/y connected devices; once switched on, the earbuds automatically reconnect to the previously connected devices in working range.

SINGLE EARBUD USAGE

1. Step 1: Please note that both the earbuds can be used in mono mode. Use Smart / Manual Power On for switching on the desired earbud
2. Step 2: The selected earbud automatically enters the connection mode indicated by LED flashes
3. Step 3: Turn on Bluetooth on your phone/media device and search for ‘Immortal 171’ to connect

Notes:

• To switch to Stereo mode, simply take out the other earbud from the case. It will automatically power on and pair with the previously selected earbud, hence enabling Stereo usage
• You cannot skip tracks or return to the previous tracks in Mono (single-earbud) mode

QUICK GUIDE ON FUNCTIONALITIES

VOICE ASSISTANT

1. Step 1: Long touch the CTC on left earbud for 3 seconds to activate default smart voice assistant
2. Step 2: The respective voice assistant screen pops up and you may place your commands at ease Tips: You may try out the following commands,

Note: If the voice assistant doesn’t get triggered, then the functionality has to be first enabled via your media device settings.

BEAST™ MODE Long touch the right CTC for 3 seconds to switch to Low Latency mode, also known as the BEAST™ Mode. Once switched on, it gets notified via a sound prompt. Long touch the right CTC for 3 seconds once again, to turn it off and return to standard Music Mode.
Made for the Gamers – By Gamers, BEAST™™ Mode reduces the latency significantly and improves the overall gaming experience

ENX™ TECH

Our ENx™ (Environmental Noise Cancellation) tech algorithm cancels out the background noise so that you can be heard crystal clear via voice calls. One need not activate ENx™ as the 4x mics are already equipped with the same and activated by default. Deliver your voice without interruptions anywhere – traffic, railway stations, airports, work space; literally anywhere!

SMART POWER OFF

1. S tep 1: After usage, remove both the earbuds from your ears
2. Step 2: Place the earbuds back into the charging case in correct orientation and close the lid The earbuds automatically switch off (and enter charging mode).

MANUAL POWER OFF

1. Step 1: Long touch CTC for 5 seconds (Left & Right separately) to manually power off each earbuds.
2. Step 2. Once the earbuds get turned off, place them back inside the case and close the lid.

FACTORY RESET

Perform the factory reset in case you feel any difficulty while operating your Immortal.
*NOTE: Before performing reset, clear “Immortal 171” from pairing device history by forgetting device

1. Step 1: Take out both the earbuds from the case
2. Step 2: Long touch CTC on both the earbuds for 5 seconds
3. Step 3: Place the earbuds inside the case, close the lid and wait for 5 seconds
4. Step 4: Take out the earbuds from the case and perform a fresh connection Congratulations! Your Immortal 171 has been Reset

SPECIFICATIONS

WARNING

• Please follow the instructions to operate
• Please don’t use the earbuds in extreme temperatures
• Please don’t use the product near water • Please keep the product away from heat sources, as the heat may damage it
• Don’t jam the ports such as charger port, LED port, etc.
• It is recommended to utilize the product below the maximum volume in order to protect hearing and extend the ear-buds’ service life

Advisable: The earbuds may start at a 100% volume and it may need to be reduced when they are switched on at first. This can be done by using volume control on media device.

FCC

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.

Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

•  Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
•  Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>