BN-LINK BNH-60/U148 Indoor Smart Digital Countdown Timer User Manual

BN-LINK BNH-60/U148 Indoor Smart Digital Countdown Timer

PRODUCTS VIEW

1. Plug: Only to be used with a grounded device.
2. LED Indicators: This shows the current countdown program. All LED indicators will light up briefly during initialization.
3. Toggle: Use this button to cycle through different countdown programs.
4. ON/OFF Button: Use this button to manually turn on or off, overriding the current program.
5. Repeat Button: Activate or deactivate a daily repeat of the selected countdown program.

RATINGS

• 125V-,60Hz
• 15N1875W Resistive & General purpose
• 1ON1250W Tungsten & Electronic Ballast
• 1/2HP, TV-5
• Operating temperature: 5°F-122’f{-15’C-50°C)
• Storage temperature:-4°F-140’f{-20’C-60’C)
• Insulation class: II
• Protection class: IP20
• Clock accuracy: +/- 2 minutes/month
• Min setting time: 15 minutes
• Max setting time: 6 hours

WARNING

• Follow local electrical codes
• Use a grounded outlet
• Unplug the timer before cleaning
• For indoor use only
• Do not use it in wet locations
• Keep children away
• Do not exceed electrical ratings
• Fully insert a plug

APPLICATIONS

• Lighting
• Heating systems
• Humidifiers
• Nebulizers
• Cooling systems
• Hydroponics
• Aquariums
• Ventilators

OPERATING INSTRUCTIONS

1. Initialization:
   When the timer is first powered, all the indicators will illuminate and then go out after the self-diagnosis process. There is no power output at this stage.

2. Setting a countdown program:
   Press the TOGGLE button one or more times until the desired countdown program is selected, the indicator EAT 1066 above the program name illuminates and the countdown starts. The timer will output power and then cut it off when the countdown process ends. The indicator will go off when the countdown process ends.

3. Shifting to another countdown program
   To shift to another countdown timer, just press the TOGGLE button to select your desired countdown program. The indicator of the running program will go out and the indicator of the newly selected program illuminates. The new countdown program starts.

4. Activating the daily repeat function
   Press the REPEAT button when a countdown program is running, and the indicator on the REPEAT button illuminates, indicating that the daily repeat function is now active. The current program will run once again at the same time on the next day.

5. Example: If a 30-minute program is set at 12:00 and the REPEAT button is pressed at 12:00, the 30-minute countdown program will run every day at 12:00 from the next day on.

6. Deactivation of the daily repeat function You can turn off the repeat function by:
   a. Press the REPEAT button, and the indicator on the button will go out. This will not affect an ongoing program.
   b. Press the ON/OFF button to end the ongoing program as well as the daily repeat function.
   Note: When a countdown program is in the run with the daily repeat function active, press another countdown program select will start a new countdown process and deactivate the daily repeat function.

7. Termination of a countdown program
   A countdown program terminates in the following 2 conditions:
   a.When the countdown program completes, the indicator goes out and the power output is cut off.
   b. Press the ON/OFF button at any time to terminate a countdown program. This operation also deactivates the daily repeat function.

8. Always ON
   If a countdown is already in the run or the daily repeat function is active, press ON/OFF twice to set the timer to ALWAYS ON. If the timer is in OFF mode, press ON/OFF once.
   Note: In ALWAYS ON mode, the indicator on the ON/OFF button illuminates and the power output is permanent.

9. Terminating ALWAYS ON
   a.Press ON/OFF button, the ON/OFF indicator goes out and the power output is cut off, or.
   b. Select a countdown program.

10. Restarting a running countdown program
    a. Press ON/OFF to terminate the program and then press TOGGLE to re-select the program, or.

TROUBLESHOOTING

• PROBLEM: No button is responsive.
• POSSIBLE CAUSES AND SOLUTION: Check that the timer is receiving power.
• PROBLEM: The daily repeat function cannot be activated.
• POSSIBLE CAUSES AND SOLUTION: Check that the REPEAT indicator illuminates. This feature functions only when the indicator is on.

BN-LINK INC

• 12991 Leffingwell Avenue, Santa Fe Springs
• Customer Service Assistance: 1.909.592.1881
• E-mail: support@bn-llnk.com
• Http:/lwww.bn-link.com
• Hours: 9AM – 5PM PST, Mon – Fri
• Designed in California Made in China

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>