GetD GD02S Smart Audio Glasses User Guide
- June 5, 2024
- GetD
Table of Contents
GetD GD02S Smart Audio Glasses User Guide
Thank you for choosing our products! Please read user guide carefully before use of product. For better service, the user guide might be updated. Changes due to product performance and function upgrades will be made without prior notice.
Functions
- Compatible with Bluetooth devices such as mainstream brands of smart phones and tablets.
- Support AAC audio decoding technology to achieve CD-level sound quality.
- Left and right dual speakers, directional playback,true stereo sound.
Packing list
Appearance
Charging
Indicator in red when charging, off if fully charged
Low-battery alert
When the battery of the glasses is low, the glasses will give a voice alert “battery low”. This is reminder of charging in time. Glasses will automatically turn off if battery is too low.
Power on
-
Put on glasses, glasses will power on automatically
-
When the glasses are charging, unplug the charging cable, the glasses will automatically enter power-on state.
-
Put on glasses, both hands holding the smart sensing area to power glasses on.
Power off
-
Glasses will be powered off if no wearing more than 3 min
-
Glasses will be off automatically when charging
-
Glasses will be off automatically if bluetooth is off more than 3 min
-
Both hands holding touch are to power off
Bluetooth pairing
Pairing for the first time: Put on glasses, the device will automatically turn on. Turn on the Bluetooth of smart phone, find “GetD Eyewear” from the Bluetooth list , click to pairing. Once pairing is completed, there will be a beep “bibi”, and the blue indicator will change to a breathing light.
Connection:
Within the effective range, the Bluetooth of the smart phone is turned on, the
glasses will be automatically connected when wearing glasses.
Remark:
When using the glasses for the first time, or after changing the smart phone,
glasses need to pair again.
Phone call mode
Double—click the touch area of right temple to answer end the call.Swipe forward or backward to reject the call
Voice assistant
Double—click the touch control area of left temple to enable the smart phone voice assistant, For example: Siri, Xiaoyi, Xiaoai, etc.
Music mode
Left temple touch area, swipe forward: Volume + swipe back: Volume —
Double—click the touch control area of right temple to play pause the music.Swipe forward to next song, and swipe backward to previous song.
Auto detecting
*: When listening to music, taking off the glasses will pause the playback, putting on the glasses will automatically resume playback.
Reminder
- Please read the user guide carefully before using this product, and keep this manual properly.
- When using it for the first time, please fully charge the product first.
- If the product is not used for a long time (more than three months), please charge it regularly.
- Do not wipe the dirty lenses directly. Wet the lenses first, and then use soft cloth to clean carefully. When wiping, the glasses cloth should be wiped in the same direction, do not wipe back and forth, and do not wipe in circles on the lens.
- When the Bluetooth is connected, there will be a power indicator on smart phones.
Safety
- To prevent possible hearing damage, do not use high volume for a long time.
- Using harsh cleaning tools or wrong cleaning supplies may cause damage to the product, please use the original glasses cloth or a clean and soft cloth to wipe the product. Please use ordinary neutral cleaning solution, do not use abrasive cleanser or spray, highly concentrated cleaning solution, chemical cleaning solution, alcohol, or acetone solvent may cause damage, deformation, or discoloration of frames, accessories and lenses .
- Please use the device within the temperature range of 0°C-45°C, and store the device and its accessories at normal temperature. Extreme high or low temperature may cause equipment failure.
- Do not expose the glasses to the sun for a long time, otherwise they will be easily deformed, aged and broken.
- Do not place in a high temperature environment, the battery may explode due to overheating.
- Do not wet the product in contact with liquid, or immerse it in liquid.
- Do not wipe the glasses with alcohol when cleaning.
- Please keep the device dry and avoid liquid splashing into the machine. Please keep the device and its accessories away from rain or moisture. This device does not support washing, please do not directly wash the temples or perform ultrasonic cleaning, etc.
- It is forbidden to heat and bend the temples, so as not to damage the temples and cause the function failure.
- The charger must meet the requirements of “2.5 Restricted Power Supply” in the standard “GB4943. 1 Safety of Information Technology Equipment”. When charging is complete, disconnect the charger from the device and unplug the charger from the power outlet. Do not place the magnetic end of the charging cable close to metal objects to prevent the risk of short circuit caused by magnetically attracting metal objects.
- This device cannot be used for protection of artificial light sources, and cannot be used as eye protection against mechanical shock damage (applicable to optical glasses)
- Please note that strenuous exercise while wearing the product may cause facial injury due to product breakage.
- Some people are allergic, and their skin is allergic to plastic, metal, fiber, nylon and other materials.lf there’s symptoms such as redness, swelling, and inflammation, please stop using glasses and consult a doctor.
- To avoid radio wave interference, please keep a distance of at least 15 cm from implanted medical devices or personal medical devices (such as pacemakers, cochlear implants, hearing aids, etc.), and consult the manufacturer of the device.
- Do not disassemble or modify the equipment (including replacing the built—in battery) and accessories without authorization, otherwise the equipment and accessories will not be covered by the company’s warranty. Please contact the customer service if the equipment fails.
- Please dispose of equipment, batteries and other accessories according to local regulations, and do not treat them as household waste. Improper handling of the battery may cause the battery to explode.
- Please comply with local ordinances regarding the disposal of this device and its accessories, and support recycling operations.
Hazardous Substances
Component
Name| Hazardous Substances
---|---
Lead
(Pb)| Mercury
(Hg)| Cadmium
(Cd)| Hexavalent
Chromium
(Cr(VI))| Pollorcminated
biphenyls
(P88)| Polybrominated
biphonyls
ethers(P8DE)
Plastic| | | | | |
Assembled printed
circuit board| | | | | |
Metal| | | | | |
Battery| | | | | |
Accessories| | | | | |
Frames/Lens| | | | | |
This table is prepared in accordance with the provisions of SJ/T 11364.
: Indicates that hazardous substance contained in all homogeneous materials of
the part is below the limit specified in GB/T 26572.
: Indicates that the hazardous substance in a certain homogeneous material of
such component is beyound the limit specified in GB/T 26572.
Shenzhen GetD Technology Co.,Ltd.
Address: 1901,Building 2A,Shenzhen International Innovation Valley,Xili
Street,Nanshan District,Shenzhen, 518055,China
Website: www.iGetD.com
Tel: 0755-86239145
FCC Warning Statement
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
The device has been evaluated to meet general RF exposure requirement.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>