SHENZHEN HP1389 True Wireless Earbuds Instruction Manual
- June 5, 2024
- Shenzhen
Table of Contents
SHENZHEN HP1389 True Wireless Earbuds Instruction Manual
Product Specifications
Model No: HP1389
Transmission Distance: 10m
Frequency Response: 20Hz-20KHz
Impedance: 32Ω
Charging Time: Approx 1 hours
Material: ABS+PP
Bluetooth Version: 5.1
Speaker Driver: 13mm
Battery for Charging Case: 200mAh
Battery for Earbuds: 25mAh
Playing Time: Approx 4 hours
Size: 674828mm
Button Function Illustration
- Power on/off: Power is on when the earbud is taken out of the charging case. And power is off when the earbud is being put into the charging case.
- Play/Pause: Double click touch button (either side) under Bluetooth connection state.
- Previous Track: When using two earbuds, long press the touch button on left earbud for 2s to playback the previous track; while using one earphone, long press the touch button on left earphone for 2s for the next track.
- Answer a phone call: Double click touch button(either side) when there is an incoming call.
- End a call: Double click touch button(either side) during the phone communication.
- Reject a call: Press touch button for 1s(either side) when there is an incoming call.
- Next track: when using two earphones, long press the touch button on right earbud for 2s to play the next track; while using one earphone, long press the touch button on right earbud for 2s to go to the next track.
- Voice assistant: Three times click touch button(either side) to activate the voice assistant. Click the touch button three times again to exit the voice assistant.
Charging
- Connect the TYPE-C cable to TYPE-C interface of the power adapter, rotate out the power plug, insert the adaptor into the 100-240v AC socket, and connect the mobile phone or electronic products with the other side of TYPE-C cable. And now the charging will be started. Once the charging is completed, please remember to pull out the adaptor from the wall socket.
- When the charging adapter is plugged into the socket, the adapter will automatically charge the charging case inside the adapter, the indicator light flashes red while the charging case is being charged, and the red light stays on when the charging case is fully charged.
- The earbuds will be charged automatically when they are put into the charging case. The ice blue light will be constant and be off when the charging has been completed.
FCC Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B Digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction