KAYINOW DF-580 Hand Crank Emergency Radio with Bluetooth Speaker Instructions

KAYINOW DF-580 Hand Crank Emergency Radio with Bluetooth Speaker

Operation Guide

1. Power button/long press for 3s to switch it on. Press silence button to switch to radio mode.

2. Music mode: long press to turn volume down, and quick press to switch to previous song.

3. Radio mode: long press to turn volume down, and quick press to switch to previous channel

4. Music mode: long press to turn volume up, and quick press to switch to next song.

5. Radio mode long press to turn volume up, and quick press to switch to next channel.

6. Witch mode/BluetoothyFM/AM  SOS button long-press tor 3s It also functions as reset button.

7. Radio mode: channel indicator/volume indicator while adjusting volume
   Bluetooth mode: Bluetooth indicator/ volume indicator while adjusting volume
   TF mode: indicator of the number of playing song

8. Battery indicator. red light is on while charging.

9. Percentage of battery: 99% is full charge

10. Mode indicator. BT/FM/AM/TF

11. Torch button

12. type C/USB charge port

13. TF card slot, and it will be played automatically after inserting TF card.

14. USB output charging for portable devices

SOS usage

1. SOS button is at the bottom6
2.  When use this function, please long press SOS button for 3s, and the device will start alarm to ask for help from surrounding people.
3. To switch off SOS function, please long Press it again for 3s.

Caution:
SOS button also functions as a reset. After resetting this device, the Bluetooth speaker and Radio will restore default settings. Bluetooth should be reconnected, and channels should be saved again.

Bluetooth speaker usage

1. Once a device is switched on, the Bluetooth mode is on. To switch from other modes to Bluetooth mode, please quick press button”M”6. the mode could be found at 10. Curren
2. Open Bluetooth function of phone, and find DF-580 to connect.

Radio Usage:

1. Pull out antenna in FM mode.

2. Quick press button “Mto switch to FM or AM mode.
   (Current mode could be found at (0.)

3. Long press the play button for 3s to search for channels automatically. The device will save all the accessible channels and does not have to do so manually.
   (When the device is searching for channels, you cannot switch channels by pressing a button. Please be patient and wait for the automatic search to finish.)

4. After the device finishes automatic search and saving channels, quickly press the play button 3 to switch to the next channel.

5. When next time use FM or AM function, do not need to search for channels again. Quick press play button and saved channels could be selected and listened to.

Volume adjustment

1. When turn volume down, please long press for 3s.
2. When turn volume up, please long press4 for 3s.

Crank charging usage:
Crank charging function is prepared for charging the device, and it is only recommended in emergency.
Caution: Please switch off the device when using crank charging

Please pull out the crank as in the picture and rotate it clockwise.
After 3-5 minutes, and inner battery is active and ready to function.
When charge device with crank, the red light of battery indicator will be on, and crank will produce energy at the speed of 130-150 rmp/min.
After 30 minutes, inner battery will contain 300 MAH battery.

Solar power charging usage

Turn the solar panel of the device towards the sun directly. When charging, the red light of battery indicator will be on. This function is only recommended for torch, radio, and SOS because of its low efficiency.
It is mainly used to extend battery life and tace emergencies.
Caution:
Please switch of the device when using solar power charging.

Specification

Caution
There are no substitutable accessories for this product and replacing accessories leads to the invalidation of warranty.
Please do not replace the battery because it is the inner battery.
Avoid using the device under humid or corrosIve circumstances.

RF waning for Mobile devices:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance 20cm
between the radiator & your body.

Warranty Certificate

1. The warranty will go into effect on purchasing
   day, based on the date written on the purchase certificate.

2. The warranty should only be applied under normal circumstances. If there is a malfunction caused by the poor quality of this product, instead of man-made damage, warranty service should be applied with a purchase certificate and warranty card.

3. The warranty would not apply to the following situations:

4. The service expiration date is exceeded.

5. The damage is caused when not following the instruction

6. People, unauthorized by our company, caused damage by changing, modifying, and disassembling the device

7. Use the device under harsh conditions, such as smoky, hyperthermal, and harmful situations

8. Our company reserves the final interpretation right of this warranty.

FCC Caution.

This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.
   Any changes or modifications not expressly approved by the party responsible for compliance could void the User’s authority to operate the equipment.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and,if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>