THE BASEMENT WATCHDOG Basement Watchdog Battery Instructions
- June 6, 2024
- THE BASEMENT WATCHDOG
Table of Contents
To help prolong the life of the battery, please follow the following steps:
Also see the instruction manual for further details and important safety
precautions.
-
Check fluid levels every 4-6 months
- When fluid levels are low, add distilled water to the top fill line
- DO NOT add more acid after the initial installation date
Receive a reminder to check fluid levels every 6 months by:
-
Clean the underside of yellow cap
♦ Included with the Basement Watchdog system is a yellow battery
cap- This yellow cap is to be placed on the second cell from the positive post
- When checking fluid levels, rinse the yellow cap under running water
-
Clean the battery terminals
♦ Clean any corrosion off of the ring posts and ring connectors on the ends of the battery wires- Use a stiff brush or sandpaper
- DO NOT apply corrosion resisting sprays or pads to the terminal rings or posts after you have cleaned them, since this could prevent the battery from charging properly
Congratulations on your purchase of a Basement Watchdog battery!
Please note: The yellow cap comes with the Basement Watchdog System. If
you have any questions, concerns or need a free replacement
for the yellow battery cap please call Glentronics, Inc. at
800-991-0466 , option 3 or
email us at mail@glentronics.com.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>