Tiller Roadster Bike User Guide

Tiller Roadster Bike

IN THE B0X

UNBOXING
UNBOXING

1. Lift box flaps and push box body to carefully slide the wheel out, avoiding contact with the frame
2. Lift the Roadster out of the box and sit it on the fork with the stand deployed. Take care to not damage the handlebar cable

ATTACHING HANDLEBARS

1. Ensure handlebars are centered and rotated to a comfortable position
2. After tightening, push down on the handlebars and check if handlebars can rotate

REMOVE PROTECTORS

FIT FRONT AXLE TO FORKS
SCREW 0N NUTS
TIGHTEN FRONT WHEEL NUTS
CONNECT MOTOR CABLE
ATTACH PEDALS
ADJUST SEAT HEIGHT, TILT & POSITION
DOWNLOAD THE APP AND TURN IT ON

Download the Tiller Rides app by scanning the QR codes below or searching for Tiller Rides in the App Store / Google Play

Follow the in-app instructions to complete the setup of your Roadster

USING CONTROL SWITCH

SAFETY CHECKS
REMOVING/ INSTALLING BATTERY

1. To remove battery pack Slide battery pack lever downwards
2. Rotate the battery pack clockwise
3. Carefully pull the battery pack away from the roadster

To install battery pack

1. Align the batterypack& frame markings
2. into the frame Insert the battery pack Rotate the batterypack
3. anti-clockwise till the batterypack ‘clicks’ into place

USING THE QUICKTETHER

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>