Shenzhen Cheluzhe Technology CLZ101 Wireless Carplay Module User Manual

** Wireless carplay module**

How to Connect for the Wireless CarPlay

Step 1, Connect BOX with Your Car

• Start your car first.
• Make sure to disconnect your iPhone Bluetooth with the car screen or any other device.
• Connect The BOX to the USB or Type-C interface of the original car screen with the iPhone interconnection function (CarPlay Function).

Step 2, Identify BOX

• When you see the picture on the right of your car screen, then connect your iPhone Bluetooth to BOX.
• Any questions about the connection, please contact them via WhatsApp for a perfect solution.

Step 3, Bluetooth Pairing

• Turn on your ‘Phone’s Bluetooth and VViFi first.
• Before pairing, Disconnect the Bluetooth and WiFi between your ‘Phone and car screen (or any other device).
• Use your ‘Phone to search for the Bluetooth “CarPlayBox_ for pairing (Only Bluetooth, Not VViFi). It usually takes 5-10 seconds (It depends on your ‘Phone and car). Just enjoy the wireless CarPlay after the only one-time pairing.

Special Note for Connection

• Before Bluetooth Pairing, Make sure to disconnect the Bluetooth and WiFi between your iPhone and the original car screen or any other device to avoid interference.
• Please use your iPhone to search Bluetooth “CarPlayBox_****” for pairing, and follow the iPhone prompts to connect. (Only Bluetooth, Not WiFi)
• If you have any questions about connection or use, please contact the technical support team via WhatsApp for a solution.

OTA Online Upgrade Method

Step 1, Disconnect Car USB and Connect WiFi

• First of all, Make sure to disconnect the BOX with your Car USB port (or Type-C port).
• DO NOT USE THE CARPLAY PORT BUT ANOTHER USB PORT
• Use another phone charger or power bank to power. BOX for OTA online upgrade (5V/300mA).
• Connect your iPhone WiFi to the BOX.
• WiFi Name: CarPlay_****, Password: 88888888.

Step 2, Enter the IP Address to Upgrade Page

• Enter the IP Address 192.168.2.1 in your iPhone browser, and enter to the upgrade page.

Step 3, Check the Version and Upgrade

• You can check the upgrade options, history versions, and upgrade logs on the upgrade page.
• If the device fails. you can download the upgrade log and send it to the Technical Support Team via WhatsApp to fix the device for you.

Special Note for OTA Online Upgrade

• First of all, Make sure to disconnect the BOX with your Car USB or Type-C port.
• DO NOT USE THE CARPLAY PORT BUTANOTH ER USB PORT
• Use another phone charger or power bank to power.
• If you have any questions about connecting, using, and upgrading this device. please contact Technical Support Team via WhatsApp to get a satisfactory solution.

FCC Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Caution: Any changes or modifications to this device not explicitly approved by the manufacturer could void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
RF Exposure Information
The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>