TenYua Q4 Wireless Display Adapter User Manual
- June 5, 2024
- TenYua
Table of Contents
Product Manual
Introduction
This product is a wireless display receiver. It supports AirPlay mirroring for
Apple iOS and Mac systems, as well as Miracast standard protocol for Android
and Windows systems, for synchronizing screens on the display of mobile
phones, tablets and notebooks to TV, projectors car screens and other big
screens, enjoy the big screen fun. in addition it is also suitable for home
multimedia applications and DLNA mode of network players. This product’s
‘screen sharing” concept is suitable for home entertainment, business
meetings, party sharing and other scenarios, and enjoy the beauty of big-
screen sharing. This manual will guide you to unlock the powerful functions of
this product.
Package listing
Please check if the following supplies are included in the product package.
wireless display adapter………………………..x1
AV adapter cable …………………….x1
USB power cable ……………………………x1
HDMI cable……………………….x1
User manual……………………………..x1
Hardware installation
-
Connect the wireless display adapter to the HDMI port of the TV with an HDMI cable, and connect the USB port of the TV with a USB power cable. If the power supply of the TV 1513 interface is insufficient please use a minimum 5V/1A charger to supply power for the wireless display adapter. The headphone jack of the device can support 3.5mm to AV output for connecting to active speakers or TVs with AV input.
-
Adjust the TV signal source to the corresponding HDMI channel and you will see the hoot screen of the display dongle
105 system mirroring function
The mirroring screen is the core function of this product, which is suitable for mobile phones and tablets of 1058.0 and above.
- Keep the boot interface is in the 105/MAC system dedicated mode interface.
- As the picture shows, click the “screen mirroring’ button, select and click the name of the Renkchip device, and you can successfully share the screen.
For MAC system mirroring
-
When using this product on Macbook, please keep it in the dedicated mode interface of IOS/MAC system.
-
0pen the AirPlay button in the upper right corner of Macbook, select the RENKCHIP-XXXX device, and the mirroring is successful.
Fothe r Android system mirroring
The Mirroring mode is the core function of this product, which is suitable for
mobile phones and tablets with Android 4.4 and above that support the Miracast
protocol.The Mirroring mode is the core function of this product, which is
suitable for mobile phones and tablets with Android 4.4 and above that support
the Miracast protocol.
-
Please confirm that the product is in the dedicated interface of the Android/ Windows system. ( press the switch button on the front of the device to switch to the dedicated interface for the Android/Windows system)
-
Turn on the Miracast function on your Android device. There are common shortcut key operations, such as Samsung Smartview Huawei multi-screen interaction. For models without shortcut keys generally go to Settings>More Connection Settings>Screen Mirroring or Settings> Display> Screen Casting, or Settings>WLAN >More Settings >Screen Mirroring.
-
Select the ‘RENKCHIP-XXXX’ device in the Miracast function, wait for a few seconds, and the phone screen will be automatically displayed on the TV after the connection is successful.
Notice:
Different Android devices have different Miracast names. Common names include
screen sharing, wireless display, screen mirroring, etc; there are also
differences in how to open it, Common in the system settings menu Wi-Fi
settings, wireless display, etc., or in the list of shortcut keys at the top
of the screen. For details, please refer to the instruction manual of the
mobile phone manufacturer.
Windows system mirroring mode
The mirroring mode is the core function of this product, which is applicable
for Windows 8.1 and above, need the CPU, graphics, and wireless network are
all Intel. Before use, please make sure this laptop is in Miracast mode.
-
Use the shortcut key Windows+P.
-
Select the ‘Connect to Wireless Display’ option.
-
Select the device ‘RENKCHIP-XXXX’, wait for a few seconds, and the screen can be successfully displayed.
DLNA Function
To realize the DLNA function, firstly, you need to set up the network connection between the device and the router. This product is suitable for 2.46&5G dual WiFi channels.
-
Keep the boot interface in the Android/Windows system dedicated mode.
-
Open the phone settings »> Open win >>> find the Renkchip4000( hotspot » enter the password: 12345678.
-
After the phone is successfully connected to the hotspot, return to the main interface of the mobile phone, open the mobile phone browser, enter the URL 192.168.49.1, click ‘Enter’ and click ‘SCAN’, and wait the mobile phone search for the hotspots of the surrounding routers.
-
After searching for the surrounding routing signals, find your router name, click and enter the routing password. Wait for a while, the network connection is completed between the device and the router.
Notice
- In the DLNA mode, you only need to set up the network for the first time, after that, it will automatically connect to the WiFi that was connected for the first time after it is turned on.
- Please set the device connected to the SG wifi. because teh SG wifi experience is better.
How to use the DLNA function on Android phone and 105 phone
Open the mobile phone’s audio and video APP, select the program source want to
play, click the DLNA/Airplay screen projection button in the upper right
corner of the video after playing, search for the ‘Renchip-XXXX’ and click to
use the DLNA/Airplay playback.
Common fault analysis
Q.There is no boot screen, the screen shows no signal?
A. Please check whether the HUMI port connected to the device is consistent
with the HDMI port selected by the TV signal source, or replace another HDMI
port for data transmission. When the US8 power supply port of the TV cannot
reach 5V/lA Please choose another power supply method.
Q. After use mirroring mode, the screen freezes and delays?
A. Check whether the power supply is 5V/1A, and check whether the WiFi channel
connected to the mobile phone is the same with the device. Or there is a
certain interference in WiFi transmission, please stay away from microwave
ovens, induction cookers and other household appliances that have
interference. If the current WiFi environment is very noisy and the wireless
signal inter-termite is serious, please try to change the Wi-Fi channel of the
router.
Q.After the mirroring is completed, enter some video apps, there is sound
but no video signal, and the screen tips the Airplay status?
A. Please completely close the APP in the background of the mobile phone, and
then select the mirroring mode. After the mirroring is completed, open the
video APP again.
Q. The mobile phone system has been upgraded and this product cannot be
used?
A. This product will also release a new version of the firmware for the mobile
phone version upgrade. Just set the product connected to an available network,
and the product will automatically download the new firmware and install it.
Q. Unable to enter the IP address 192.168.49.1 of this product?
A. Please check whether the product is in Android/Windows mode, and whether
the signal connection between the mobile phone WiFi and the product has been
interrupted. Please ensure that the mobile phone is connected to the Hotpoint
named RENKCHIP-XXXX, and then enter the browser and enter the IP address.
Q.The signal of this product cannot be found in the mobile WiFi list?
A. Please check whether this product is in Android/Windows mode. In IOS/MAC
mode, the product will not transmit WiFi signals. Also, please confirm whether
the power supply meets the specifications.
Q. The function of the 3.5mm AV port on this product?
A. This product has an original HDMI+AV dual output mode. Some monitors do not
have an HDMI port. You can choose to use an AV port transmit video. In
addition, the AV put t of this product can be connected to an external active
speaker, which can bring better sound effects.
Q. When using the laptop, it prompts “unable to connect” or “device does
not respond”.When using the laptop, it prompts “unable to connect” or “device
does not respond”?
A. Please check whether the power supply 5V/1A is in compliance with the
specifications. The laptop needs to meet four conditions: Intel processor,
Intel graphics, Intel wireless networker, Win8.1 and above systems.
FCC Warning Statement
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions. may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation. RF Exposure Statement To maintain compliance with FCC’s RF exposure guidelines. This equipment should be installed and operated with a minimum distance of 20cm the radiator of your body.
This device and its antenna(s) must not be co-located or operated in conjunction with any other antenna or transmitter.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>