Dongguan Nyga Electronics NJP311 PS3 Game Controller User Manual
- June 5, 2024
- Dongguan Nyga Electronics
Table of Contents
NJP311 PS3 Game Controller
Nyga Electronics NJP311 PS3 Game Controller
User Manual
Preface:
Thank you for purchasing the game. In order to better experience and use
the product, please read the following instructions carefully.
Product overview:
The PS3 Game controller has a comfortable feel and can be compatible with a variety of games on PS3 consoles in the market.
Product features
A. ABS material.
B. 8-10m wireless connection.
C. Double vibration motor.
D. The handle has a built-in battery with a capacity of 400mA.
Usage method:
Connect PS3 game console: support wired connection and plug and play. When
using the PS3 wireless controller wirelessly for the first time, you need to
use the P3 controller data cable to guide.
One end is inserted into the PS3 game console, and the other end is connected
to the PS3 controller. Press the controller PS button, and the indicator light
will be on. Then you can unplug the data cable to use it wirelessly. One PS3
game console can support the connection of 7 PS3 Game controllers at the same
time.
Turn off the PS3 Game controller to turn off the controller, just press and
hold the controller PS button for about 5 seconds. A window for turning off or
switching the controller will pop up, and select turn off.
Power supplement:
When PS3 is started or on standby, use the USB cable of P3 and the controller
to supplement power. Press and hold the PS key for more than one second, and
the remaining power will be displayed on the battery screen.
- The battery is exhausted. To charge the controller power supply, please connect the USB P3 controller data cable. The controller needs to be charged for about 2 hours.
- Please keep bonding under the load condition of 10 ° C to 30 ° C (50 ° F and 86 ° f).
- If you haven’t used the wireless controller for some time, it is recommended that you charge the battery at least once a year to obtain better performance.
FCC Caution£º
This device complies with part of the FCC Rules. Operation is subject to the
following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.