INTERMATIC DTAV40 Series Auto-Voltage Defrost Timer Instructions
- June 5, 2024
- Intermatic
Table of Contents
DTAV4s0 Series
Setting Defrost Times:
Follow this procedure to configure defrost times:
-
On the timer wheel, choose a defrost starting time.
-
Slide the tripper upward that is directly above the desired time. The timer will initiate a 15-minute defrost at the configured time.
-
To increase the duration of the defrost, slide up the trippers that are adjacent to the starting time.
NOTE: Each tripper on the time wheel represents 15 minutes. For example, to set a 45-minute to defrost, slide the two trippers adjacent to the starting time.
NOTE: The AM and PM locations on the wheel represent 6 AM and 6 PM. -
Repeat steps 1 through 3 as necessary to configure multiple defrost times for a given day
300GR10138
Documents / Resources
|
INTERMATIC DTAV40 Series Auto-Voltage Defrost
Timer
[pdf] Instructions
DTAV40 Series, Auto-Voltage Defrost Timer, DTAV40 Series Auto-Voltage Defrost
Timer
---|---