G Youth Technologies WLEOOl Type-C Magnetic Wireless Earphones User Manual

G Youth Technologies WLEOOl Type-C Magnetic Wireless Earphones

Specification

1. Charging Input voltage: DC 5V 0.5A
2. Battery: 3.7V 145 mAh
3. Charging time: approx 1.5 hours
4. Playtime: approx 1 5hours (60% volume)
5. Version: BT 5.3
6. Supported BT profile: A2DP, AVRCP, HID, HFP, SPP
7. BT working distance: approx 10m
8. Working temperature: 0- 40C
9. Working humidity: «70%
10. Output Impedance: Max 2.2Ka
11. BT working frequency: 2402 MHz- 2480 MHz

Product Description

Button Description

1. Power / EQ Switch Button
2. 2 V+ Forward
3. Play/Pause/ Answer / Hang up / Reject/Voice assistant
4. V-/Backwa rd
5. Type-C
6. LED lights
7. Microphone

Turn on/off

1. Turn on: Long press the Power / EQ Switch Button for about 3 seconds to power on.
2. Turn off: Long press the Power /EQ Switch Button for about 5 seconds to power off.

Earphones charging

1. The Earphones cannot be turned on when charging.
2. The red light is always on when charging.
3. When fully charged, the blue light is always o,the charging time is about 1.5 hours.

BT connection

1. Place the earphones near the device you are using.
2. Press and hold the Power/ EQ Switch Button for about 3 seconds until the red and blue lights flash alternately to enter the pairing state.
3. Go to Bluetooth settings on your device and select “Laplace”, after the connection is successful, the blue light flashes slowly.

Automaticconnection / Automaticconnectionback

1. When the earphones are paired with the device successfully, the BTof the earphones will automatically connect to the device next time.
2. When the earphones cannot connect to the device, shorten their distance by about 10 meters, then the two devices will be connected automatically.

Packing list

• The earphone 1PCS
• Manual 1 PCS
• USB Charging cable 1 PCS

FCC warning

Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference.
2. this device must accept any interference received, including interference that may cause undesired operation.

These limits are designed to provide reasonable protection against harmful interference in a residentlal Installation. This equipment generates uses and can radiate radlo] frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user ls encouraged to try to correct the Interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

The device has been evaluated to meet the general RF exposure requirements. The device can be used in portable exposure conditions without restriction.

Warranty card

Thank you for purchasing products, our products are enjoying a 15-day replacement and 1-year warranty service policy, in order to ensure that the legitimate interests are read the warranty card and safekeeping.

Instructions for use

1. This warranty card as the only evidence of the company’s product warranty.
2. You can contact customer service online to replace the same type of products (except human factors ) from the date of sale within 15 days, such as the failure of performance, under the product and the package is complete and no scratch.
3. The product, from the date of sale within one year from the event of the failure of performance, can enjoy warranty service ( except for artificial factors).
4. There is no warranty service when it’s out of warranty period.
5. The accessories are not covered in the warranty.
6. Artificial behavior to dismantle.

Warranty record

This product has passed the strict quality inspection, according to this warranty description, any hardware failure caused by the product’s own quality problems under normal use, will be responsible for free maintenance during the warranty period.

ADRESSE

• Manufacturer: G-youth Technology Co., Ltd
• TEL number: +86 16620632696
• Adresse: No.6 floor, Hainabaichuan Building, No.6 Baoxing Road, Haibin Street, Xinan Avenue, Baoan District, Shenzhen City, Guangdong Province, China

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>