Dongguan Xingruida Electronic Technology XRDSB Wireless Speaker Bottle User Manual

Dongguan Xingruida Electronic Technology XRDSB Wireless Speaker Bottle

Product Contents[

](https://manuals.plus/wp-content/uploads/2022/07/Dongguan-Xingruida- Electronic-Technology-XRDSB-Wireless-Speaker-Bottle-fig1.png)

Technical Information

Connecting Your Device[](https://manuals.plus/wp-content/uploads/2022/07

/Dongguan-Xingruida-Electronic-Technology-XRDSB-Wireless-Speaker-Bottle- fig2.png)

• Turn on the Bluetooth speaker by pressing and holding
• Turn your Bluetooth device on search mode. Find device titled “B83” and select.
• Once a connection with media device has been established, “connected” will sound.

Tumbler Functions[](https://manuals.plus/wp-content/uploads/2022/07

/Dongguan-Xingruida-Electronic-Technology-XRDSB-Wireless-Speaker-Bottle- fig3.png)

• Press to skip to the previous track. Press and hold to decrease volume.
• Press and hold to turn on/off. Press to pause/play music.
• Press to skip to the next track. Press and hold to increase volume. LED light indicates if device is paired or needs to be charged.
• To charge your Bluetooth speaker, connect the micro-USB to the port.Speaker

Power Recharging[](https://manuals.plus/wp-content/uploads/2022/07

/Dongguan-Xingruida-Electronic-Technology-XRDSB-Wireless-Speaker-Bottle- fig4.png)

Connect the USB cable included to charge your bluetooth speaker tumbler through a computer USB port or power adapter.
Low Power Warning: When voltage is lower than 3.3V, “low battery please charge” will sound. Leave for at least 1.5 hours for full charge.

Tumbler Cleaning Instructions[](https://manuals.plus/wp-

content/uploads/2022/07/Dongguan-Xingruida-Electronic-Technology-XRDSB- Wireless-Speaker-Bottle-fig5.png)

• To clean the tumbler, twist to separate the speaker bottom from the tumbler body first. Clean speaker bottom separately by wiping with a damp cloth to avoid damage to the speaker.
• Hand wash tumbler recommended.
• Use non-abrasive cleaner.
• To clean speaker, wipe with a damp cloth.

FCC Statment

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, whichcan be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>