AlcaPLAST A115 Pre-Wall Installation System Instruction Manual
- June 5, 2024
- ALCAPLAST
Table of Contents
Pre-wall installation system
Mounting instructions
A115
ATTENTION! The dowels you choose depend on the type of wall. The enclosed
dowels are for the brick wall. It is necessary to use the dowels – ø12
mm.
The thickness of the lime plaster is min. 20 mm,
max. 95 mm.
Suspended WC connection
ad.5
Is not included in the package and should be bought separately.
Spare parts A115:
Spare parts A06:
“Small” volume flushes adjustment.
Producer fixtures small flushing on 3 l. Adjusting on 3,5 l flushing is
possible after regulation of float – see figure.
“Large” volume flushes adjustment.
Producer fixtures large flushing on 6 l. Adjusting on 9 l flushing is possible
after regulation of the control lever – see figure.
Spare parts A16P:
ATTENTION!
In case of any difficulties while mounting the installation system, please
address a professional service. It is necessary to use the sound-absorbing pad
M91 for mounting the installation. If you don´t use it, the claim for a
replacement won´t be accepted.
Producer:
Alca plast, s. r. o., Bratislavská 2846690 02 Břeclav, Česká republika
Tel.: +420 519 326 499, +420 519 323 456 – prodej ČR
Tel.: +420 519 361 641 – export,
Fax: +420 519 330 621
e-mail: alcaplast@alcaplast.cz,
www.alcaplast.cz